Vienna Symphonic Library Forum
Forum Statistics

194,444 users have contributed to 42,922 threads and 257,971 posts.

In the past 24 hours, we have 6 new thread(s), 15 new post(s) and 74 new user(s).

  1. Home
  2. Sample Libraries
  3. Vienna Instruments Libraries
  4. audio quits in logic while running VI

  • audio quits in logic while running VI

    S
    S
    I'm not sure what is going on here;
    my system:
    Dual G5 with 4 gigs of RAM
    Logic 7
    Tascam FW-1804 interface
    Vienna instruments

    I start Logic and run VI on an audio instrument track. I then load a preset into VI. Logic and VI show a signal coming through but no sound through the interface. Once I turn the interface off then back on, I get sound. However, shortly the sound stops again.
    I've updated the firmware for the FW-1804 and the problem still presists. I've never had any problem with this interface before.
    Any ideas would be a big help.
    Thanks
  • T
    T
    last edited
    last edited
    Make sure you are using Logic 7.2.1. This latest update solves a problem where tracks would suddenly stop playing.

    TH


    @serialmusique said:

    I'm not sure what is going on here;
    my system:
    Dual G5 with 4 gigs of RAM
    Logic 7
    Tascam FW-1804 interface
    Vienna instruments

    I start Logic and run VI on an audio instrument track. I then load a preset into VI. Logic and VI show a signal coming through but no sound through the interface. Once I turn the interface off then back on, I get sound. However, shortly the sound stops again.
    I've updated the firmware for the FW-1804 and the problem still presists. I've never had any problem with this interface before.
    Any ideas would be a big help.
    Thanks
  • S
    S
    Thanks I do need to update. It usually is something simple. I've been too myopic to see it.
    Cheers
  • M
    M
    I've had the same problem. I also use Logic 7.2 ,4 gigs of RAM with a Apogee Rosetta 800. For me there is either no sound or it stters badly. Sometimes the problem I can fix the problem by flipping the Apogee off and on or by resetting the buffer size in the Hardware and Drivers. And then there are times that I have to do a complete restart. It is only The Vienna Instruments tthat trips up my interface and I've never had trouble before now. Once I get it locked in it's fine but sometimes it can take me 20 minutes to get sussed out.
  • M
    M
    sorry I meant to say it sometimes stutters badly. And by the way I do have the latest updates and they didn't help this problem for me.
  • T
    T
    last edited
    last edited

    @mattdowns6 said:

    I've had the same problem. I also use Logic 7.2 ,4 gigs of RAM with a Apogee Rosetta 800. For me there is either no sound or it stters badly. Sometimes the problem I can fix the problem by flipping the Apogee off and on or by resetting the buffer size in the Hardware and Drivers. And then there are times that I have to do a complete restart. It is only The Vienna Instruments tthat trips up my interface and I've never had trouble before now. Once I get it locked in it's fine but sometimes it can take me 20 minutes to get sussed out.


    Mattdown6...but do you have Logic 7.2.1? Not 7.2.....

    Also, how are you using just a Rosetta as an interface?

    Tom
  • M
    M
    Hey Tom,

    Yes, I am using 7.2.1. As for the Rosetta I use a Digidesign 192 to plug my mic pres , POD, stuff like that, into then I interface that to the Rosetta. and I'm using the Digidesign Sync box for my midi stuff. I had run Logic on top of the TDM platform for a minute but then decided it was easier to just run native.
    I'm clocking to a Big Ben.
    I think that's everything.