Vienna Symphonic Library Forum
Forum Statistics

194,096 users have contributed to 42,911 threads and 257,915 posts.

In the past 24 hours, we have 6 new thread(s), 21 new post(s) and 80 new user(s).

  1. Home
  2. Sample Libraries
  3. Vienna Instruments Libraries
  4. suggestions for new VI slave

  • suggestions for new VI slave

    R
    R
    Hi there,

    Always looking to expand Ram loading of VI. Have one our of my 4 PC slaves (all running 2 gig ram) - that needs to be rotated out of the studio (3.5 years old).

    Want to pick up a new slave but of course would like the best bang for the buck. Any suggestions? What about about going with a MAC slave this time set up with 16 gig ram. It would be pricey but if it could get me 8x the loading capacity - may be worth it.

    Opinions - suggestions?


    Rob
  • N
    N
    I'm sorry nobody's answered, Rob! If I had an intelligent answer I'd give it (and I've only just installed the player on a Windows machine, so I can't compare yet).

    One thing is that the number of samples - 40K or 45k - seems to be a limitation on Macs, I think independent of the RAM you have installed. That would make sense, since Andrea Gozzi wrote a whole samplemerge routine to circumvent a Number of Open Files limitation with the previous version.

    But this could be wrong, so don't quote me. I haven't figured out what happens when you load multiple instances of the player. That'll involve pulling memory out of one machine to load the other, so it's kind of a project.
  • J
    J
    I am using VI on a MAC, as a plugin in Logic and Cubase. I have 5gigs of ram and have access to 4.4 gigs of memory for VI. The MAC is working well for me. However, it is not the slave but the main machine.

    J
  • R
    R
    last edited
    last edited

    @Jay Weigel said:

    I am using VI on a MAC, as a plugin in Logic and Cubase. I have 5gigs of ram and have access to 4.4 gigs of memory for VI. The MAC is working well for me. However, it is not the slave but the main machine.

    J



    Thanks guys. Jay, these are impressive Ram totals. Right now the best my 2 gig ram PCs can give me is about 1.6 gig of ram loading. You are getting 2.5 that!!!!!!

    But I do need to know if the the mac is the way to go as a slave.


    Rob
  • J
    J
    I see no reason why the using a au or vst host to load the plug-in would cause a change in ram usage. I get the same ram usage in cubase and logic. One is vst one is au. So, you could get a au or vst host for the mac or even use cubase le or something else.

    jay
  • R
    R
    last edited
    last edited

    @Jay Weigel said:

    I see no reason why the using a au or vst host to load the plug-in would cause a change in ram usage. I get the same ram usage in cubase and logic. One is vst one is au. So, you could get a au or vst host for the mac or even use cubase le or something else.

    jay



    Hi Jay, right now my main DAW is PC running SX (very pleased and familiar here.)

    My 4 PC slaves are running Vstack - lightpiped into the main Daw's MOTU 2408 mk 3 sound card. Again this works well for me.

    I just want to replace my oldest of PC slaves to something that will give me more than the 2 gig ram.

    Knowing that - would a MAC slave work - or is there something else?

    Rob
  • N
    N
    last edited
    last edited

    @Another User said:

    I have 5gigs of ram and have access to 4.4 gigs of memory for VI.


    Very politely: I don't think so, Jay. You can't possibly get more than about 3 and change if you look at Activity Monitor. Maybe you're looking at virtual memory and not RAM?

    I repeat this at least once a day, but no program can access more than 4GB minus system libraries and frameworks.
  • J
    J
    No need apologize Nick. I was just quoting what the Vienna Instrument memory tells me (I believe in the perform window). I was beta testing 1.06 and it told me I have 4.45gigs available. I will load patches and count the memory usage and see where it ends up. Sorry if I posted any confusion.

    jay
  • M
    M
    last edited
    last edited

    @Nick Batzdorf said:


    I repeat this at least once a day, but no program can access more than 4GB minus system libraries and frameworks.


    exactly, thanks for repeating it over and over again Nick [:)]

    I ´d say it doesn´t make sense to have more than 6 GB of RAM in a Mac as long as we´re running Tiger OS 10.4 (or Leopard) cause it is still a 32 bit OS.
    (2 ^ 32 = 4 294 967 296 bytes = > 4GB which can be addressed by one application minus approx. 1 GB for libraries and frameworks as Nick mentioned).

    However I find it difficult to tell which system, Mac or PC works better or more efficient. With the "Mathias Henningson´s 3 GB trick" the possibilities to address RAM are almost the same on PC as on Mac. It is more and more a matter of habit (or taste [6] ) I´d say.
  • C
    C
    Rob.. with the 3GB switch, it would definately be more cost efficient to go with a PC slave. But if cost isent an issue, then why not - G5's look cool [:D]
  • R
    R
    last edited
    last edited

    @Christian Marcussen said:

    Rob.. with the 3GB switch, it would definately be more cost efficient to go with a PC slave. But if cost isent an issue, then why not - G5's look cool [[:D]]



    Thanks Christian - unfortunatel costs is always an issue. [[:D]]


    I think I need to give some serious consideration then in 'converting' my existing PC with 2 - 1 gig sticks of ram into 3 gb total. Can I ask who is sucessfully doing this with 1-2 year old machines?


    Rob
  • C
    C
    last edited
    last edited

    @Christian Marcussen said:

    Rob.. with the 3GB switch, it would definately be more cost efficient to go with a PC slave. But if cost isent an issue, then why not - G5's look cool [[:D]]



    Thanks Christian - unfortunatel costs is always an issue. [[:D]]


    I think I need to give some serious consideration then in 'converting' my existing PC with 2 - 1 gig sticks of ram into 3 gb total. Can I ask who is sucessfully doing this with 1-2 year old machines?


    Rob

    Well if cost is an issue its PC for sure...

    I plan converting my slaves once the rest of the Cube arrives. I'll start out with trying it on one or two PC's. So if you can wait i'll tell you how it went. If not you have to buy some ram [:)]

    The way I see it I can get 2-3 times samples loaded for the same price as buying a new slave (if I convert all of my slaves into 3.5-4GB machines). So that is definately more cost efficient.
  • D
    D
    last edited
    last edited

    @Rob Elliott said:


    I think I need to give some serious consideration then in 'converting' my existing PC with 2 - 1 gig sticks of ram into 3 gb total. Can I ask who is sucessfully doing this with 1-2 year old machines?


    Rob

    Rob, this is exactly what I've done, as my machines are just over a year old. The snag is that now I have eight 512Mb sticks that I don't need. However, I have started to sell those, so the actual cost for each PC to be upgraded has been around £80. So in total I have spent £320 and can now (or as soon as I get the rest of the cube) load around 14-15GB of samples, which equates to around twenty-six GS3 machines. Cool huh... [H]

    DG
  • N
    N
    last edited
    last edited

    @Another User said:

    But if cost isent an issue, then why not - G5's look cool


    My slave doesn't look cool. The shelf my computers were on for a good ten years collapsed a few months ago, sending them all hurtling to what looked like certain death. Amazingly, none of them broke, but that G5 is now pretty banged up. [:)]

    You're wrong about it definitely being cheaper to buy a slave PC and that the G5 is a waste of money, by the way. It's not completely clearcut.