-
Recently I upgraded my system sample drive to use a raid-0 of two SSD on sata3, via pcie bus.
https://www.sonnettech.com/product/tempossd.html
The benchmark tests showed incredible improvements in raw disk performance through this raid array.
It did not make ANY difference to the VEP project load time. Before that I was using a single SSD on sata2. (MacPro 5,1).
All that being said, the longest my system has ever taken to load a VEP project is 1.5 minutes....around 100 channels of VSL instruments. Even with the single sata2 SSD that is how long it took. I can't imagine waiting 40 minutes...something is amis.
-
Paul,
For those of us who dived right-in and purchased VEP 7, but already have the Giant Taiko, may we have an alternate incentive?
Besides, wasn't this used as an incentive for someting else? Wasn't it SY Percussion 1??????????
-
You say your loading time for that template is 35 to 40 minutes - please tell us you're not loading from a spinner drive but an ssd. Or multiple ssd's. If you're on a Mac Pro cheesegrater putting those ssd's in a pcie card adapter will double the loading speed from if they're in the drive bays.
Oh yes multiple ssds of course, and on a PC with double xeon.... Just lots of instruments i guess, and it loads up into about 240gb of ram . I know a couple of fellow composers who have the same "problem", so its normal for a template that size
-
You say your loading time for that template is 35 to 40 minutes - please tell us you're not loading from a spinner drive but an ssd. Or multiple ssd's. If you're on a Mac Pro cheesegrater putting those ssd's in a pcie card adapter will double the loading speed from if they're in the drive bays.
Oh yes multiple ssds of course, and on a PC with double xeon.... Just lots of instruments i guess, and it loads up into about 240gb of ram . I know a couple of fellow composers who have the same "problem", so its normal for a template that size
Where are those ssd's - inside the computer or outside? If outside how are they connected? You do have Kontakt Memory Server disabled right? With that amount of memory (never heard of a machine having that much ram) it sounds like you're having everything load into ram instead of streaming from the ssd's. If so here's a hint - let things stream.
-
You say your loading time for that template is 35 to 40 minutes - please tell us you're not loading from a spinner drive but an ssd. Or multiple ssd's. If you're on a Mac Pro cheesegrater putting those ssd's in a pcie card adapter will double the loading speed from if they're in the drive bays.
Oh yes multiple ssds of course, and on a PC with double xeon.... Just lots of instruments i guess, and it loads up into about 240gb of ram . I know a couple of fellow composers who have the same "problem", so its normal for a template that size
Huge template then. How many instruments? If you have thousands, then it is what it is. This is another area where if VEP update made a substantial improvement for project load times, through parallelism or something...it would be instant buy for me.
-
Hello everybody!
Finally some news on the features of VE Pro 7!
Beta-testing is going well, and we’re doing our best to make this version the most stable and comfortable .0 version we have every released. It’s also looking good for macOS 10.10 support.
Final steps in development will take some more time, and I’d like to thank you in advance for your patience and understanding.
Also, we’re hoping for a little miracle on the AU3 side of things. We’re quite close to making this a GREAT feature for all Logic users out there, and even if a new version of Logic is probably not released when VE Pro 7 is ready, we’re hoping for some crucial fixes that will make this feature work!
All the best from a busy busy busy Vienna,
Paul
Paul Kopf Product Manager VSL -
Hello everybody!
Finally some news on the features of VE Pro 7!
Beta-testing is going well, and we’re doing our best to make this version the most stable and comfortable .0 version we have every released. It’s also looking good for macOS 10.10 support.
Final steps in development will take some more time, and I’d like to thank you in advance for your patience and understanding.
Also, we’re hoping for a little miracle on the AU3 side of things. We’re quite close to making this a GREAT feature for all Logic users out there, and even if a new version of Logic is probably not released when VE Pro 7 is ready, we’re hoping for some crucial fixes that will make this feature work!
All the best from a busy busy busy Vienna,
PaulYou have made me a very happy person this dreary day here.
-
Great looking features, thank you Paul. I'd really still like a Wake On Midi feature for disabled instruments / folders instances, but there's easily enough here for me to upgrade.
-
Got a question:
I did the pre-order thing and am downloading the Synchron library now. Being in the USA and using US currency what date will be used to calculate the exchange rate from euros to US dollars? Right now it's $85 and change. Is the exchange rate figured on the date I puchase or what? Paid through Paypal if that makes any difference.
-
Hi musicman,
The exchange rate is the one used on the day of purchase. If you used PayPal, you might already see it in your PayPal account. You can also see a 'Show US-$ Info' on the bottom left of the VE Pro 7 product page.
Great to see happy first responses of details on the VE Pro 7 features!Best,
Stefan
-
Hello everybody!
Finally some news on the features of VE Pro 7!
All the best from a busy busy busy Vienna,
PaulGreat news, really appreciated set of features and nice presentation (Hopefully stopping bad moods 😊 and... looking forward to final release!
-
Hi musicman,
The exchange rate is the one used on the day of purchase. If you used PayPal, you might already see it in your PayPal account. You can also see a 'Show US-$ Info' on the bottom left of the VE Pro 7 product page.
Great to see happy first responses of details on the VE Pro 7 features!Best,
StefanOn other notes it took about 48 minutes to download the whole library which isn't too bad as I had other things to keep me occupied. Surprised at how decent the Synchron freebie is. Now to just wrap my head around the Synchron player.
-
Also, we’re hoping for a little miracle on the AU3 side of things. We’re quite close to making this a GREAT feature for all Logic users out there, and even if a new version of Logic is probably not released when VE Pro 7 is ready, we’re hoping for some crucial fixes that will make this feature work!
This is very encouraging. in your talks with Apple, please make sure they do not overlook that the Scripter plugin will need to be updated to be aware about "port". Many orchestrators are relying on scripter for articulation management above and beyond the built in articulation set features of LogicPro. Scripter will need to become port-aware, just like tracks, the enviornment and everything else in order to fully support a multiport AU3 plugin. I really hope you guys will be able to make all that happen. But I also realize this depends a lot on what Apple decides to do to LogicPro in order to support multiple ports per instrument channel.
Good job getting the product info out to everyone...
-
This is very encouraging. in your talks with Apple, please make sure they do not overlook that the Scripter plugin will need to be updated to be aware about "port".
The best thing, when AU3 support is released, is to get rid of the Scripter plug-in and the Multi Port Macro ;
I have upgrade to V7 😉
-
This is very encouraging. in your talks with Apple, please make sure they do not overlook thatthe Scripter plugin will need to be updated to be aware about "port".
The best thing, when AU3 support is released, is to get rid of the Scripter plug-in and the Multi Port Macro ; I have upgrade to V7 😉 Au3 will not eliminate the need for scripter! Scripter is used for articulation management by many people. That has nothing to do with the multiport macro or AU3. But the thing is scripter will need to become port-aware in order to function with a multi port AU3 plugin. Scripter can already work with the existing multiport macro because port is specified via CC99 and scripter can detect and send that. When AU3 comes, there will be internal data to track port inside the event object itself so unless that is exposed in scripter, then it will not be possible to have multi port articulation management scripter solutions any longer. Also, as vsl hinted already; they are working with Apple on this and “crossing their fingers” which is a nice way of saying that LPX has to be improved in order to support AU3 multiport configurarion. An AU3 plugin from vsl will be meaningless until LPX is updated in all necessary ways to support that. I agree we can all move past the multi port macro when that day comes but a lot depends on what Apple will do to LPX in order to support it, including changes to the environment, scripter, track headers, and probably other places as well and internally to support channelizing tracks on both ports and channels. Until such time the multiport macro still works. If vsl removes multiport cc99 support from vep7 I will not buy it
-
It is better to have the AU3 and Logic Expression Maps as it is hardcoded in Logic
It look like Scripter is interpreted, so will run more slowly
You can use Babylon Waves to handle your Logic Expression Maps
-
It is better to have the AU3 and Logic Expression Maps as it is hardcoded in Logic It look like Scripter is interpreted, so will run more slowly You can use Babylon Waves to handle your Logic Expression Maps
For many people, myself included, logicpro’s articualtion sets, (there are no expression maps in Logic Pro) are not adequate for certain situations, and scripting is necessary. In some cases the Apple articulation set output section is buggy as well. There are several third party solutions that work around those shortcomings with scripter. Those solutions will not be able to take advantage of AU3 multiport unless scripter is updated to be port aware. Babylonwaves does not provide solutions to these challenges they have just worked out a common set of input key switches to use with all libraries and setup the articulation sets for you but they are still limited by the limitations of logic pro’s articulation set feature set and bugs. And in some ways may be limited by trying to have one common input keyswitch paradigm which is a nice idea for simple scenarios but entirely inadequate for more complex situations. It’s a lowest common denominator in that sense. It doesn’t always facilitate all of the capabilities of any given library and nor does logicpro’s articulation set feature. I agree if your needs are simple then stick with simple solution such as that but if you have more advanced needs then scripter is often needed. It will be crucial for many people that vep plugin supports port awareness in scripter. For example, legato latency correction is a hot topic lately with some attempts to create better articulation management using scripter. There are other things too and plenty of room for future improvement to articulation management, but if scripter is not made port aware then those advanced scenarios will be blocked from being able to use AU3 multiport. For those of you with simple needs then I agree try to avoid scripter of course. By the way scripter does not in itself make anything run slowly it uses very little resources when scripted properly.
Forum Statistics
196,294 users have contributed to 43,015 threads and 258,401 posts.
In the past 24 hours, we have 1 new thread(s), 7 new post(s) and 145 new user(s).