Vienna Symphonic Library Forum
Forum Statistics

194,425 users have contributed to 42,920 threads and 257,967 posts.

In the past 24 hours, we have 4 new thread(s), 11 new post(s) and 69 new user(s).

  1. Home
  2. Software
  3. Vienna MIR & Vienna Suite
  4. High CPU Usage for VE PRO/MIR PRO: 90%+

  • High CPU Usage for VE PRO/MIR PRO: 90%+

    N
    N

    So my CPU has spiked to 90%+ for VE PRO/MIR PRO. Even though I increased my latency to 2048 on my host and MIR PRO to 4096. I also maxed out my threads to 32. Any idea how to bring this down? The UI has become sluggish and slow.

    Thanks,

    -Nektarios
  • Beat KaufmannB
    Beat KaufmannB
    last edited
    last edited

    @nektarios said:

    So my CPU has spiked to 90%+ for VE PRO/MIR PRO. Even though I increased my latency to 2048 on my host and MIR PRO to 4096. I also maxed out my threads to 32. Any idea ...

    And the setting of the Audio Interface?

    You also can switch the latency of it to 2048 (ca. 45ms delay) as long as you don't record anything which need to be controlled over a headphone 1:1...

    Beat

    - Tips & Tricks while using Samples of VSL.. see at: https://www.beat-kaufmann.com/vitutorials/ - Tutorial "Mixing an Orchestra": https://www.beat-kaufmann.com/mixing-an-orchestra/
  • N
    N
    last edited
    last edited

    @Beat Kaufmann said:

    And the setting of the Audio Interface?

    You also can switch the latency of it to 2048 (ca. 45ms delay) as long as you don't record anything which need to be controlled over a headphone 1:1...

    Beat

    The setting for my audio interface is 2048 samples. The spike I notice mainly on my VE PRO instance. Although,  my Cubase shows relatively low usage. Seems like I am using too many plugins... 😕
  • DietzD
    VSL Team
    DietzD
    Do you use (m)any VE Pro Audio Input plug-ins to route signals from Cubase to VE Pro?
    /Dietz - Vienna Symphonic Library
  • N
    N
    last edited
    last edited

    @Dietz said:

    Do you use (m)any VE Pro Audio Input plug-ins to route signals from Cubase to VE Pro?

    I have 8 ports activated in VE PRO where each port (of 16 channels) is for an instrument, i.e violins. In VE PRO. I use many plugins, mostly VSL EQ/Compressors, but I also use other non VSL plugins, mostly from iZotope. On the master bus I added MIRacle too. Even when there is no playback, and is idle, it stays at 82%.
  • N
    N

    I believe there is only one audio input routed from Cubase to VE PRO.
  • Cyril BlancC
    Cyril BlancC

    Where are your libs ? HD ? SSD ? Raid 0 of HD ? Raid 0 of SSD ?
  • N
    N
    last edited
    last edited

    @Cyril said:

    Where are your libs ? HD ? SSD ? Raid 0 of HD ? Raid 0 of SSD ?

    SSD. I use the Samsung 1 TB SSD. 
  • Cyril BlancC
    Cyril BlancC
    last edited
    last edited

    @Cyril said:

    Where are your libs ? HD ? SSD ? Raid 0 of HD ? Raid 0 of SSD ?

    SSD. I use the Samsung 1 TB SSD. 

    Did you reduce the pre-load buffer size in Directory Manager ?
  • N
    N
    last edited
    last edited

    @Cyril said:

    Where are your libs ? HD ? SSD ? Raid 0 of HD ? Raid 0 of SSD ?

    SSD. I use the Samsung 1 TB SSD. 

    Did you reduce the pre-load buffer size in Directory Manager ?

    I never changed that. My CPU started spiking after I started using Ozone 6 Pro Plugins. I use Ozone 6 Dynamic EQ / and regular EQ. I also use the Ozone Alloy 2. But why when it's idle, it's at 80%+? 
  • Cyril BlancC
    Cyril BlancC

    Did you check if your system is paginating ?

    Reducing pre-load buffer is freeing memory !
  • N
    N
    last edited
    last edited

     

    @Cyril said:

    Did you check if your system is paginating ?

    Reducing pre-load buffer is freeing memory !

    I'll check. I have 64 GB of ram!