@Paul said:

Hello again, 

Another update: We have decided to pull VE PRO from MyDownloads and roll back to the previous version until we have fixed the AU/MAS confusion (working on it with high pressure, and it is looking good). 

If you´d like to roll back, please use the VE PRO Uninstaller, this way the MAS plug-in will be completely removed.
I will let you know as soon as the update is available!

If you´d like to accelerate beta-testing, please let me know at support@vsl.co.at, I´ll provide you with the next release candidate as soon as it is ready.

Thanks for your understanding and patience, 

Paul

Paul,

I've had a number of issues with the latest update. Can you clarify which version we should be rolling back to? The software version I just downloaded is v.5.4.13682. Is this the previous version? It still gives the option to install MAS. I installed this version with the MAS optioin unchecked, but then couldn't get VE Pro to successfully communicate with DP at all.

@Ben Stanton said:

Can you clarify which version we should be rolling back to?

Is there any answer on this? I'm highly regretting updating VEP before all the bugs have been worked out. I can't go 10 minutes without a crash, whereas before I didn't have any.

Hello Ben,

The version before 5.4.13682 is 5.4.13407, available in the Software Archive.

If you´d like to share the problems you are having and maybe want to send us crash reports and short instructions on how to reproduce the crashes you are getting, please send them to: support@vsl.co.at

Best,
Paul

Does it help lower CPU in DP to lower the 48x16 available midi channels per instantiation? or doesnt it matter? 

@labman said:

Does it help lower CPU in DP to lower the 48x16 available midi channels per instantiation? or doesnt it matter?

Same with me.

Constant crashes DP 8 with 5.4.13682

rig was stable under old VEP.

Seems to be as the VEP template gets larger, crashes started occuring.

Sent support an email.

Love you guys - but this one sucked boiled eggs. Lost a lot of time dealing with it.

@edhamilton said:

Same with me. Constant crashes DP 8 with 5.4.13682 rig was stable under old VEP. Seems to be as the VEP template gets larger, crashes started occuring. Sent support an email. Love you guys - but this one sucked boiled eggs. Lost a lot of time dealing with it.

Hi, 

We´re really having a hard time to reproduce these crashes here. 

@Ed: You think this is automation-related, can you please send us such a song (best as a zip file) to support@vsl.co.at?

That´s the fastest way to move forward, the next release candidate is already in the pipeline. 

Best,
Paul

I have had a smooth transition to the MAS version with no major issues at my end. I even combined frames from 2 computers and merged them to a new one.

Now one thing I noticed it seems like loading of samples works differently than the AU version. I have my VE-PRO plug-ins in V-RACKs organize by groups and sections that are disabled by default. I did this so my template would load fast (as it doesn't load anything) then I would simply enable the sections I need for a given cue say strings and woodwinds and leave everything else off.

Now after I've converted to the MAS version eventhough all my VE-PRO plug-ins (in V-RACKS) are disabled it goes and load everything as I open my template. Is this new normal? Am I missing something? Anybody else noticed that?

Hello everybody,

We just uploaded a new version of Vienna Ensemble PRO, 5.4.13715.

Hope you like the improvements, especially for DP users:

•Added: Transparent migration from VST/AU to MAS (see VE PRO 5 manual: Important Notes for Digital Performer Users)
•Added: Default MAS plug-in to Realtime (instead of Pregen) mode
•Fixed: MAS plug-in not properly going offline when disabling a V-Rack Chunk in Digital Performer
•Fixed: Incorrect latency compensation and time info in MAS plug-in
•Fixed: Potential superfluous parameter change messages being sent to master host from plug-ins
•Fixed: 'AutoGroupSelectedChannels' option (changes in preferences were not considered in VE/MIR PRO since the parameter was overwritten from a hidden control in MIR PRO preferences)
•Fixed: Instances not loading minimized (Preferences setting) if loading from master host
•Fixed OSX: Certain AU plug-ins (u-he and others) not able to automate properly over the full parameter range
•Fixed OSX: Space bar transport not working when connected to Digital Performer
•Fixed OSX: Shortened delay on space bar transport control (Start/Stop) when connected to Digital Performer, Pro Tools or Studio One

NOTE: DP projects saved with the previous version of the MAS plug-in need to be loaded with AU/VST plug-ins disabled in DP.

Best,
Paul

Wonderful! Thanks so much, works like it used to but only better!

Thank you Paul!

Re VEP Server 5.4.13715, discovering that projects (created in rev 5.3.13407) with VEP instances distributed between my Mac master and PC slave, no longer load properly.  

VEP tries to load all the instances on the Mac. Instances which lived on the PC slave no longer load there.

I can create a new DP project and create a VEP instance on the PC slave, and it works.  

But projects created in 5.3.13670 do NOT work in 5.4.13407, and are rendered dead in the water.  I will have to roll back to the previous rev. in order to continue work on my project.

--Chuck

Hello Chuck,

Please contact me under support@vsl.co.at, with a short description of your activated VST/AU/MAS settings and your network setup. Sounds like a network problem to me.

Also, did you check the new chapter "Important Information for Digital Performer Users" in the VE PRO 5 manual?

Best,
Paul

Hi Chuck, 

Thanks for the description. I actually meant your network setup... Are you using static IP addresses (you should)?
VE PRO connects based on 2 parameters: the IP address and the instance name (preserved name). 

Let´s take it from there. 

I think we would be much faster and more efficient if you could contact me directly at support@vsl.co.at, this way we wouldn´t fill this announcement thread with a specific problem, if that´s ok for you. You can include screenshots and projects for me to check, if you like. 

Thanks, 
Paul

@Paul said:

Hi Chuck, 

Thanks for the description. I actually meant your network setup... Are you using static IP addresses (you should)?
VE PRO connects based on 2 parameters: the IP address and the instance name (preserved name). 

Let´s take it from there. 

I think we would be much faster and more efficient if you could contact me directly at support@vsl.co.at, this way we wouldn´t fill this announcement thread with a specific problem, if that´s ok for you. You can include screenshots and projects for me to check, if you like. 

Thanks, 
Paul

Hey, Paul,

Thanks for the great update and for the helpful replies you've been giving, here.

While it's totally understandable that you'd move this individual support issue out of this thread and handle it via email, it might still be helpful, once the issue is resolved, for you to post the fix here — in case anyone else encounters a similar issue.  😊  

This is a big change (a welcome one!), and many of us are finding this thread very helpful, as we contemplate upgrading our setups. As such, reading about various issues — and their solutions — is invaluable.

Thanks!

Hey Thread Folks,

Since updating to 5.4.13715 I'm having crashes when I try load old VEP projects.  I'm using stand alone on several PCs with the new version and all of them are misbehaving identically.  The project I'm trying to load was saved under the version immediately before 5.4.13715 and this is the first time I've ever experienced something like this with VEP5.

When I try to open any of my projects everything starts to load up, then VEP crashes and I'm back at my desktop.  Funny thing is, when I look under Windows Task Manager, the RAM footprint of the project which failed to load remains, as does Vienna Ensemble Pro x64.exe under Processes.

Is anyone experiencing this problem and what is the solution?  Thanks to all for the help!!

Hi dayjobmusic, 

We´re already looking into this. If you want to, you can send us one of your projects with a short description, the more examples we have, the better: support@vsl.co.at

Best, 
Paul

I am new to the soft synth environment and am in the process of getting set up.  I just purchased several of the VSL special editions, Vienna Imperial, Ensemble Pro 5 & the Mir Bundle.  I am using Sonar X1 Producer.  I received an email from a VSL rep stating that I can use an unlimited number of VSL instruments simultaneously.  Is that true?  If so, can you recommend any tutorials on how to set that up with Sonar?