Vienna Symphonic Library Forum
Forum Statistics

201,353 users have contributed to 43,241 threads and 259,248 posts.

In the past 24 hours, we have 2 new thread(s), 14 new post(s) and 65 new user(s).

  1. Home
  2. Software
  3. Vienna Instruments Pro (legacy)
  4. [SOLVED] VEP5 won't see instance on slave machine.
  • S
    S
    This is so strange.... i have try this but with no success.... the plug in doesn't see the instance .... and it's worse cause i can't get connected via manual IP either ... the problem is ... when i came back to my old 10.255.255.1 / 10.255.255.2 ups ... i don't have access anymore !! ARGH !!! i'm lost... Sylvain
  • E
    E

    That's really odd indeed. Let me recap

    - you are using for the Mac 10.255.255.1 and the PC 10.255.255.2

    - the network is a gigabit network

    - your Mac can ping the PC and vice versa

    - each computer can mount the shares/exports from the other machine

    - there's no firewall which might block incoming/outgoing connections

    - VEP neither 'sees' the other machine nor can it connect via given IP address, even after a reboot

    Have you checked http://community.vsl.co.at/forums/p/29058/187656.aspx ? I am running out of ideas...

    /ewo
  • S
    S
    Hi again ... all this is correct... network between Mac and PC seems to be fully operational... it's just as if VEP was not seeing network... maybe the only thing i can think about is that i'm using a straight (and not crossed) ethernet cable ... but then why it would have work this morning ? i checked the link you gave me but this guy had more a save problem than real network problem ... what i really don't understand... is that it was working, and then i wangled the IP that you gave me ... and then when i went back to the first ips... nothing worked anymore... but i didn't change anything else !!! :( i'm plugged straight to the ethernet 1 port to the pc (i've try the #2 but it's the same...) i even deactivated my wifi connection for the mac to not confuse.... Really it's just like if VEP didn't wanna see the network.... my i activate a share or anything on mac ? (i have activate file sharing to check network... but nothing else...) thx for your help.
  • E
    E

    You're right, usually you don't need a crossover cable in a gigabit LAN - particularly with regard to the working connection this morning.

    I'm puzzled... hopefully one of the seniors here can jump in and help
  • S
    S
    yes that would be nice. :-/ cause i start thinking i bought an extra pc and a VEP for nothing .... can't understand why it's not as easy as it look like regarding to the user manual .. :-/ but thx for your help anyway...
  • S
    S
    DAMN !!!!!! Little Snitch...... !!!! ok guys ... sorry for have stupidly disturb you... i have check everything but forgot i had "little Snitch" switched on.... and for unknown reason... it was stopping protools connection.... i authorized the connection back and everything is working well now... Thx Ewo for your help, your last message with the list made me think about it... Best Regards.
  • E
    E

    Luckily you found it... I was close to belive in witchcraft and wizardry  [;)]

    Much fun and success

    /ewo
  • S
    S
    thx u :) damn this software is simply incredible.... once it's launched.... :) Sylvain
  • L
    L

    I'm glad the issue was solved, but a variation of this problem remains for me. My host is a Mac Pro running Snow Leopard and Logic. The slave machine is a new Mac Mini Server running Lion. All versions of VEPro are the same. When I load VEPro into Logic, it won't display any instances from the Mini Server. If I manually establish a connection, it works fine, but obviously is a pain and extra work, especially when starting new projects. Both machines are on static IP addresses, etc. I've tried 64 and 32 bit variations: neither will display instances. If I run VEPro Server within the host Mac, the plug-in will see those "internal" instances.

    Any suggestions? Thanks.
  • B
    B
    Hi, did you try turning off all wifi devices, for some reason this can get in the way of instance broadcasting, but will still let you manually connect.
  • Cyril BlancC
    Cyril BlancC

    on the Macmini you must set it 1st with "using DHCP", note all the figures and set it to "manually" and key all the values you have noted [:)]
  • L
    L

    Thanks for the suggestion. Yes, I had turned wifi off on both machines, and it didn't fix the issue.
  • L
    L

    Thank you: I tried this, but it doesn't fix the issue. I can still manually connect to the new IP address, though.
  • Cyril BlancC
    Cyril BlancC

    What are the IP of the master and the slave ?
  • L
    L

    Mac Pro (master) is 169.254.173.204

    Mac Mini (slave) is 169.254.193.224
  • Cyril BlancC
    Cyril BlancC

    If you connect your Macmini direcly on the Macpro and you follow what I have suggest you to do, your Macpro will be on the same network than your router (usaly it is 192.168.xx.xx), and your Macmini will be on a different network number

    This is what is happening when I connect my two Macpro
  • L
    L

    Thanks for hanging in there with me. These machines have always been on a separate wired network (I use wifi for internet), with a dedicated Ethernet switch for them and an additional PC. So - no "household" router is in use for these machines.

    Are you thinking there is something wrong about my Mini IP address setting?
  • Cyril BlancC
    Cyril BlancC

    I have told you :

    on the Macmini you must set it 1st with "using DHCP", note all the figures and set it to "manually" and key all the values you have noted Smile
  • L
    L

    Yes - I did exactly that yesterday, but it didn't work. I then reverted back to my original manual IP address because I am in the middle of a project where the Logic file needs the original IP address in order to reload a preserved VEP instance.
  • L
    L

    It looks like I've finally figured out the problem. In the Mac Pro's Audio MIDI Setup app, I had an enabled "Session" in the Network MIDI section, which I used to use in a previous multi-CPU rig. On a whim, I disabled the session, rebooted Logic and VE PRO on the Mac Mini, and the instances now publish to the Mac Pro. A good troubleshooting day...