I have it working really well. I have a VE inside DP with 16 outputs, this holds all my percussion. Then I have 2 VE's running outside of DP, one running my string section and the other running Piano, Celeste and Choir. I have soundflower set up so all these instruments use a stereo channel each and that's another 16 channels.

Then I have all these coming into DP through aux tracks and I can mix and route them what ever way I want. The only dissappointing thing is that I cannot have brass and woodwind currently running outside of DP, as there are not ebough channels in soundflower to route them back in. So I can't wait until VE3 comes out then I can have 5 VEs outside of DP, one for each section. All routed into aux tracks in DP where I can process them. Awesome!!!!

Hello DG, You are quite wrong to admonish me for not reading the documentation - I did read it. Many programs I can get away with following my nose but not with Vienna. The documentation is not clear where the outputs end up (if I am trying to work within my recording program - Logic) - they don't open up in Logic - perhaps I misunderstand the routing and if that is the case, please let me know, Can't wait for 64 bit. Thanks for explaining the RAM allocations, All the best, Ed

Dear Simsy, That sounds great - I hope I can figure out how to do that with Logic. Just looked on the soundflower website - am wondering where in VE you send to Logic? I'll load SF and see if I can figure it out but any help you can offer will be greatly appreciated, thanks, Ed

I use Logic and VE. If you use VE for panning, then route them to aux channels you can dsp them with logic effects. I do this and it works really well. Another advantage of VE in Logic is that you can quickly edit the Instruments within VE.ie move from one to the other quicker. I'm afraid some people get quite up themselves when replying to questions, Go with it ask away, and someone will help eventually with with manners. Goodluck Cheers Ian

No probs, after installing soundflower here is what you should do.

1) Open Audio Midi setup in Applications>Utlities
2) Click the Audio Tab. Now go to the audio menu item and click on Aggregate Device option
3) You need to create a new aggregate device so click the plus sign and name it - myAggDevice
4) Now in the list below, first select your audio device (in my case my apogee) and click the use checkbox and then select soundflower and select it's use checkbox

Thats the audio setup!

Now to setup the midi

1) Click on the midi tab in the Audio Midi setup
2) Double click on IAC Driver object
3) In the properties box add two new ports, call them Strings and Brass etc
4) Make sure the device is online and hit apply.

Now setup Vienna Ensemble
1) Open VE
2) Open Preferences and select the aggregate device under the audio tab
3) Select the IAC ports you created under the midi tab
4) Now create your vienna instruments, select the IAC driver under port dropdown say Strings and a midi channel. At the bottom of the mixer channel select the output channel.

This is were it gets a bit tricky. The first channels in your aggregate device relate to your audio device, the rest to soundflower. So for example you have a two channel audio device then outputs 1-2 will be your audio device, outputs 3-18 will be soundflower. So inside VE route your outputs of your instruments to the soundflower channels not your audio device.

Finally, set up logic!!

1) Open logic and set your audio device to be the aggregate device.
2) Set your main output channel to outputs 1-2 etc for your audio device
3) Create a new external instrument, set its output to one of the IAC's you created for example strings.
4) Then as you normally do, use the option create with next midi channel, these midi instruments will now be sending to the external VE

*Warning - in the enviroment you must not use the SUM option in your physical Input device as it will cause a loop. Therefore go to you clicks and ports layer and cable from your keyboard only to the sequencer input

5) To get the audio back in, simply create a aux track and set it's input to match the channel numbers that you had set in the VE. And set it's output to the master output channel.

You should now be able to send midi out of Logic to the VE's running and rout the audio back into Logic to process.


Hope this helps!!!

Thanks - there are a couple of solutions to my questions and I tried yours first because it looks pretty simple. I think there must be something wrong with the way that I setup VE in the first place. I am working on a track where I made my first VE setup sheet with 3 layers of orchestral percussion, trumpets, horns, trombones, tuba (and strings that I am not using yet) They all are all called instrument 1 in Logic and just work on different midi channels. I was using aux 1 for a reverb send. When I add aux two it is added to every instance of VE and all at the same level (just like it is with aux 1) so these tracks are still coming back as a single ensemble where I cannot edit individual tracks. Sounds like I have built this incorrectly, Any other ideas? Thanks, Ed

I think I might have a solution. Set up VE as a multi- instrument as shown in manual. IE: like ultrabeat. When you go into VE and put your different vi 's to different ouputs, go back to mixer in Logic and click on the + sign it adds another aux track with the vi instance in it. Now you can use the DSP of logic to use on your instrument, independently. Cheers Ian

I found this also to be useful........... http://community.vsl.co.at/forums/p/17411/124464.aspx#124464 "In Logic's environment, create a new multi-instrument - - this will have 16 channels. Wire the multi-instrument to Instrument 1 on the MIxer page of the Environment. (To move an object from one layer of the Environment to another, select the object, hold down the option key while selecting the layer of the Environment to which you wish to move the object.) Name the Multi-Instrument something like VE 1. After you have done this, load a multi-channel instance of VE into Instrument 1. Go to the arrange page. You will find that, when you right-click or contol-click a track, you can reassign it to VE 1, channels 1 - 16). Load the instruments into VE as you desire. IMPORTANT NOTE: If you are using what is, at present, the most current OSX version of VE - - dated 2007-11-08 - - DO NOT ATTEMPT INSTANTIATION OF MORE THAN ONE INSTANCE OF VE. ((This will still give you 16 channels to work with.) If you instantiate more than one instance of VE, it will work as long as the file is open, but once you've saved and closed the file, attempting to open it again will result in a crash. In other words you will not be able to re-open the file! It is important to remember that, in Logic, MIDI Volume (CC7) changes will affect all 16 channels of a multi-instrument simultaneously. Since this is rarely desirable, use MIDI Expression (CC11) to affect changes in level for each channel - MIDI Expression settings can function independently on all 16 channels."

Well this did not work for me. In fact I now can't get any sounds out of Logic or VE. Environment issues likely. in the first section you said 4) Now in the list below, first select your audio device (in my case my apogee) and click the use checkbox and then select soundflower and select it's use checkbox (I GET MY AGGREGATE FOR DEFAULT INPUT AND OUTPUT - SYSTEM OUTPUT IS SOUNDFLOWER) ABOUT VE YOU SAID: Now setup Vienna Ensemble 1) Open VE 2) Open Preferences and select the aggregate device under the audio tab 3) Select the IAC ports you created under the midi tab 4) Now create your vienna instruments, select the IAC driver under port dropdown say Strings and a midi channel. At the bottom of the mixer channel select the output channel. (ALL I GET IS THE SAME BUS AND PAIRED OUTPUTS 1&2, 3&4 ETC AND NOT THE NEW NAMED CHANNELS ABOUT LOGIC YOU SAID: 1) Open logic and set your audio device to be the aggregate device. OK 2) Set your main output channel to outputs 1-2 etc for your audio device OK 3) Create a new external instrument, set its output to one of the IAC's you created for example strings. (IS THIS IN THE ENVIRONMENT WINDOW? I CAN SEE THE NAMES LISTED IN PHYSICAL INPUT, CREATED A NEW INSTRUMENT BUT STILL NO SOUND 4) Then as you normally do, use the option create with next midi channel, these midi instruments will now be sending to the external VE (SORRY- NO CAN DO) I can see midi happening from my keyboard through the 828, this does not make it to the VE. I do appreciate you taking such time to explain this to me. I wish it would work as simply as you state it. Is there something that I am doing wrong? Thanks, Ed

Oh deary deary me Daryl - have you been 'admonishing' people. :))))))))))))))


Like I said in an earlier post somewhere - this stuff is too technical for a lot of people and VSL NEEDS to come out with a training video toute suite.

[quote=PaulR]Oh deary deary me Daryl - have you been 'admonishing' people. :))))))))))))))

@DG said:

Paul, I don't really see how using a plugin within Logic can be too taxing, but then again I've never tried it. It is all so easy in Cubase and Nuendo, so maybe I've been spoilt by this.

 

DG

The thing is though Daryl - hate to admit it but - a lot of people like me just don't have the bandwidth to work these things out and even with kind people like yourself and Nick explaining in writing just ain't enough. Tech-no twits like me need pictures and Janet & John styled dialogue - otherwise I wind up having to get someone in to explain and set it all up (which costs) - which always happens actually.

I just don't have the time or patience to understand all this stuff. I like using it all eventually -but can't work it out for myself, or at least can't be bothered if it looks too convoluted in print. A 6 year old child could do it.


But you can never find a 6 year old child when you need one.

DG.....sorry i don"t spend my life on this community...i suppose being bitchy is your life...cheers