I'm currently using Ernest-verb [:)] in Acoustic Mirror as follows:

Dry with no gain reduction.
Wet at -9 to -12 for most of the orchestra. I'll use -3 to -6 for anything I want to be really ambient.

Depending on how busy the piece is, I'll generally use an envelope set anywhere from 2 secs to 0.8 seconds. This allows me to use higher amounts of wet signal without the result getting muddy. For very ambient sounds I'll disable the envelope.

I also have about a 50% reduction in the stereo width of the dry signal and occasionally rolloff the high-end.

This is what works for me on the project that I've been on for the last few months - which generally has moderate to brisk tempos.

Dietz,
Thanks a lot for those ideas. I see what you're saying about the adjustability vs. artificiality. I have never wanted to get into adjusting all those parameters and like the whole idea of convolution because maybe you could say it bypasses them by using the charactacteristics of the sampled place instead (?)

Slaroussels -
that info is great because I just ordered the Cholakis impulses and am going to attempt using it on Acoustic Mirror.

Could you clarify these things - "dry with no gain reduction" - do you mean it is at maximum? Or just at 0? I believe there is a possible plus 20 db on the plugin window I have.

Your envelope setting - is this a change from default in acoustic mirror? Do you think that is necessary? I like to avoid changing defaults unless absolutely necessary, but see what you're saying about avoiding mud. That has been one of my main problems since I'm trying to get a very richly ambiant hall sound.

I have done no reduction in stereo width except on an instrument specific basis - for example, collapsing the horn section in image size simply because it is not that big in the orchestral context. Again, do you think this is necessary and what does it accomplish? I 've been disturbed by reverbs that did not seem to reverberate throughout the whole space, but instead in the area where the instrument was playing.

Do you roll off the high end of the dry or wet? I would be reluctant to roll off the wet because it would alter the room characteristics, but maybe its necessary in practice.

Sorry to ask so many things but as you can probably tell I am obsessed with this right now!

Thanks,
William

Could you clarify these things - "dry with no gain reduction" - do you mean it is at maximum? Or just at 0? I believe there is a possible plus 20 db on the plugin window I have.

Just at 0.

Your envelope setting - is this a change from default in acoustic mirror? Do you think that is necessary? I like to avoid changing defaults unless absolutely necessary, but see what you're saying about avoiding mud. That has been one of my main problems since I'm trying to get a very richly ambiant hall sound.

I have no idea how Mr. Cholakis did these impulses, but bear in mind that most impulses are captured in an empty hall. This give a much longer RT60 (i.e. reverb length) than a hall filled with people, so I think it's not unrealistic to use a shorter verb length. Also, if you listen to most classical recordings, you aren't going to notice reverb tails of 8 seconds which is about average for a Numerical Sounds impulse without using the envelope feature. As always, just do what sounds good to you.

I have done no reduction in stereo width except on an instrument specific basis - for example, collapsing the horn section in image size simply because it is not that big in the orchestral context. Again, do you think this is necessary and what does it accomplish? I 've been disturbed by reverbs that did not seem to reverberate throughout the whole space, but instead in the area where the instrument was playing.

I actually collapse these on a per instrument level with the DSP Station mixer within gigastudio. This is necessary if you want the ensemble to sound further back in the mix, which seems to be more consistent with the sound of the Numerical Sounds impulses - way back. I'm really looking forward to the "stage mic" type impulses in MIR.

Do you roll off the high end of the dry or wet? I would be reluctant to roll off the wet because it would alter the room characteristics, but maybe its necessary in practice.

I roll it off the dry - that seems to be the best way to feed the Numerical Sounds impulses.

Slaroussels

Thanks a lot for that info - that makes perfect sense about the envelope and roll off. It actually sounds like something I can handle, not being an engineer. My previous recordings have been done with a Microverb, Zoom, or Lexicon reverb and turned out sounding too artificial to do justice to the VSL samples (or even previous libraries) no matter how I tried to adjust things like dry/wet, EQ, etc. So I'm hoping that by getting a basically natural sound to begin with there won't be so much need of adjusting and tweaking every little parameter.

William

Just for the record -

AFAIK, the lenght-values supplied by Ernest Cholakis / Numerical Sound are not to be mistaken as the RT60 we are used to interpret as "the reverb length", but actually the raw sample-length of his IRs. As RT60 they would look much shorter.

/Dietz - Vienna Symphonic Library

Dietz,

Could you explain why that is? Is it because the audible reverb is shorter than the measureable? Also, would you agree with these settings we're talking about on these parameters? Of course much of it is subjective I know, but as a basic approach...

Thanks,
William

are the Ernest Cholakis IR's useable on altiverb?

Anybody know?

David T

Ask Ernest, you can email him by clicking on the Contact link on his website http://www.numericalsound.com

@Another User said:

AFAIK, the lenght-values supplied by Ernest Cholakis / Numerical Sound are not to be mistaken as the RT60 we are used to interpret as "the reverb length", but actually the raw sample-length of his IRs. As RT60 they would look much shorter.

True. Though they are still plenty long. Which is not a bad thing - it's easy to use the envelope to make it shorter. Making it longer, on the other hand...

I think above all the point is that really good quality reverb contains a lot of very low-level detail. The RT60 refers to a standardised 'cut-off' point beyond which we say the reverb tail is 'finished' - but on Ernest's impulses he's carefully preserved the barely-audible information beyond that, hence very long files. This is good news; also it means it's definitely worth getting the 24 bit impulses, and worth using 32-bit floating point audio where you can, to make full use of this low-level information in the convolution calculation.
I'm still getting to know the various 'classical spaces' on the CD - each one seems to have its own very individual character.

It's good we have this forum - I'd maybe never have found out about any of this otherwise!

All the best,

SImon