Dietz, do you happen to know what Pro Tools LE and M-Powered (the native versions) use for maths?

Also, Digidesign swears up and down in white papers and probably ones in different colors that it is impossible to clip the mix bus. Now, you can clip plug-ins, so the distinction seems fairly academic, but it's unlikely that they'd make a claim like that if it were totally bogus.

I'll see whether I can find a link...

No, I never used LE-versions of ProTools, only TDM and HD, and yes, I may be totally wrong, as always! [H]

@hetoreyn said:

You can write in free time in logic .. you can in any sequencer .. but at the end of the day you need really to write to a certain beat and tempo if you want the music to eventually be scored for orchestra. And if you don't want that, then it's a good idea anyways because once you start adding loads of instruments it's going to get real messy [:P]

No this is not strictly speaking correct. As I said earlier, I often put the barlines and beats in later, and it has never been a problem transferring to orchestra. However, I don't use Logic, which doesn't have this feature (AFAIK). [H]

DG

Hmm .. fair enough. Having never had to really score anything out I was going on just thinking ahead of how I would have to approach this .. but if you can do it without then that's cool too. And as you say .. Logic doesn't have this. Mind you I can't think of any app that I have that has this mode.

@hetoreyn said:

[...]
It is said the Logic 'sounds' better. But I'm not sure about this. Dietz had said this is because Logic uses 48 bit floating point next to Pro-tools 32 bit interger .. (or the other way round [[:D]]) .. and so technically Logic should sound more musical. But I think it's down to opinion as to which is better.[...]

LOL - it's two times the other way 'round.

HTH,

Damn .. I so very nearly came off looking all knowledgable and intelligent there [[;)]]

Well I tried that's the important thing. THings just get jumbled up in my head .. I suppose there's plenty of room [:P]

Oh well .. this is the problem with responding to posts first [[:D]]

@hetoreyn said:

[...]
Damn .. I so very nearly came off looking all knowledgable and intelligent there [[;)]] [...]

See - the same happened to me in the very same posting, thanks to Nick from The ProTools Guild Of The Right And True DAW ;-D

Thanks for the feedback. I just figured out a way to do this in Logic. It is not totally efficient, but it works ok. Bounce your "free time" track to audio and scissor it into 1 or 2 bar (any length) sections. If your timing is very rubato, I would do it every bar. Now select the first region. Now enable the cycle region for the "length" of your scissored region (1 bar, 2 bar etc..). Now go to Options/Tempo/Adjust tempo using region length and locators. It gives you the option to create a tempo change, or globally change the tempo. You can do this for many regions, and build a grid that conforms to your natural tempo changes! The audio doesn't move only the grid. Once you have built the map, merge the audio track back together. If you did this with one inst-the map would be built. You can have a click- or just add new voices with more flexibility to quantize to the down beat etc.. Yay! Sort of... [:D]

Still not really sure why you want to write in free time. For me .. I just play the melodies that I want on my keyboard till I'm happy with the timing .. then I spend 5 mins in logic just getting the right tempo .. and then record the melody .. then adjust the time signature .. if it's needed.

However you no doubt have a good reason for wanting to do it the way you're doing it or you wouldn't be trying to do it that way at all [:D]

I would just suggest that maybe you're over complicating what can be a fairly easy endeavour.

@hetoreyn said:

Still not really sure why you want to write in free time. For me .. I just play the melodies that I want on my keyboard till I'm happy with the timing .. then I spend 5 mins in logic just getting the right tempo .. and then record the melody .. then adjust the time signature .. if it's needed.

However you no doubt have a good reason for wanting to do it the way you're doing it or you wouldn't be trying to do it that way at all [:D]

I would just suggest that maybe you're over complicating what can be a fairly easy endeavour.

The thing is, it's not about "right tempo", it's about the ebb and flow of music. If you want to put in a musical ritardando, then the easiest way is to play it naturally. If you set the click first, it will always sound stilted, and chances are that if you are transferring to live players, they won't be able to perform successfully to the click. In my experience, even the most complicated click tracks can work, as long as they feel natural, and are musical.

DG

With Logic, most often with the following available technique:

a) Record to the KlopfGeist at a fixed tempo; the recorded music fits the lenght of the cue.

b) Record (quasi conduct) the tempi changes into the tempolist, then record the music to that tempolist while the KlopfGeist is on.

c) Record without KlopfGeist.

d) Record without KlopfGeist, but after the recording is done, add a tempolist who fits the wave of hands of the the conductor.

e) Cut with the sizzler already existing recording to segments, there where tempo changes start/are, and then "Adjust Tempo by Selection & Locator" each segment, then record more music to the variable tempi.

f) Measure the lenght of a video segment; make the tempolist to fit the lenght, and record.

Of course, tempi and tempolists are made to fit the lenght of the film cues.

.

@Another User said:

See - the same happened to me in the very same posting, thanks to Nick from The ProTools Guild Of The Right And True DAW ;-D

Sure I like Pro Tools, but I didn't intend it to sound like my religion! In fact I didn't upgrade to HD and sold my MIXplus system a while ago, so now I just have an MBox (but I use Logic most of the time for writing).

And as I said, if you can clip plug-ins, what's the difference? [:)]

This is the link. It's about 900k:

http://akmedia.digidesign.com/support/docs/48_Bit_Mixer_26688.pdf

Angelo, Thanks for the run down of all the ways to achieve this- I will have to try some of them..
Hetoreyn, it all started when I Got a job because of a piano performance I had recorded. They wanted to use that recording in the film- it was inspired, and totally in free time. Later when they wanted to add live strings there was no click-Everyone thought it was my fault-I suppose it was- but it was impossible to play to if you hadn't heard it 10,000 times. I ended up meticulously editing some poorly performed string lines to get a performance. Since then I have realized that for me "free time" is very beautiful and natural in music. I have been striving to use the grid around my time, and not fake it with artificial tempo changes etc. I still am not sure I am totally confident I can truly pull this off. I really want to give Nuendo a demo run and see how it feels. Sorry if this doesn't make sense, or seems trivial. It just doesn't feel right to me if i write on a grid.

I'm interested in this as well. In Nuendo (and I assume Cubase, too) how do you actually go about changing the tempo to match your playing -- once you've played in the midi sequence? Do you just move barline and beatlines graphically? I've been trying to find a way to do this in Sonar and can't seem to find an easy, or graphical way.

This is one of the features I would like most, because I spend huge amounts of time adjusting the tempo manually -- and the tempo window and note event window are two separate things and not even connected. One of Sonar's deficiencies I'm afraid.

Thanks,
Mahlon

@Mahlon said:

I'm interested in this as well. In Nuendo (and I assume Cubase, too) how do you actually go about changing the tempo to match your playing -- once you've played in the midi sequence? Do you just move barline and beatlines graphically? I've been trying to find a way to do this in Sonar and can't seem to find an easy, or graphical way.

This is one of the features I would like most, because I spend huge amounts of time adjusting the tempo manually -- and the tempo window and note event window are two separate things and not even connected. One of Sonar's deficiencies I'm afraid.

Thanks,
Mahlon

Basically you are correct. There are a few technical settings to follow, but you play, set the beat quantize and then drag the barlines/beats around until they fit your playing. It can just about be done in real time, or even faster, if you are only mapping bars. Cubase also has this feature.

DG

Here's what I do to convert free-time playing to actual bars/beats in Logic.

Play the piece in as you like-maybe on piano.

Make sure it's all in one contiguous part (glue together separate parts if necessary)

Open Matrix Edit, select all notes and drag first to bar position you like (1.1.1 maybe)

Keep part selected, go to 'Region' drop down menu >Lock [part] to SMPTE position

Now you can open the Tempo editor, insert tempo changes to line up the notes to the beats and bars. To do this I keep the Matrix Editor open to see the effect of my Tempo changes on the note positions).

Oh, what Patrick Wilson says, could also be done like that

Assign a pedal to the command "tap tempo," and the sequencer will follow what you tap with your feet, while you can input the music with a controller, for example a keyboard

The keyboard I suggest for VSL live input:
http://www.keyboardmag.com/story.asp?storycode=4526:
http://www.hakenaudio.com/Continuum/

.

Thanks all. All of these are great ideas. I am feeling much more comfortable having tried some of these ideas. I can't try them all because Logic express is missing almost all useful tools, but it lets me try some of them. Still not sure about Logic vs Nuendo, but I guess I'll wait and see if a new Logic rolls out with the new OS X..I have a feeling the next version is going to be very good. Angelo-that is one wicked looking controller- I am very afraid of it!!!

There is a sequencer that can do what you want much easier than the steps mentioned for Logic. The Midi Workshop, part of SAWStudio, for PC only. Last year, a feature was added that allows you to play completely in free time, then go back, and, using the arrow key, tap the beats where they belong while listening to your performance. You can then quickly fine tune those taps perfectly to your playing. A sort of ‘reverse quantizing’. I saw it demonstrated, and it was quite amazing. A totally rubato piano piece, beatmapped in about two minutes. Ready for orchestration, and/or export to a notation program.

Also, SAWStudio does have a video track for writing to film, and three versions depending on your budget: Basic, Lite, and Full. The Midi Workshop is an add-on, but it is the full version whichever host you choose. Check out www.sawstudio.com

@Ducasse said:

Angelo-that is one wicked looking controller - I am very afraid of it!!!

My wallet is afraid too! I try to convince myself since months, that I do not need one of those ultra-high-tec keyboards, but encounter schizoid difficulties of the seventh kind while miditating on it.

.

All these convoluted methods. Just get Cubase or DP. Then it is all so easy. [:D]

DG

I seldom use Cubase, so I'm not sure, but the TimeWarp tool in Cubase SX only works for audio tracks, and Nuendo doesn't have this TimeWarp feature.

Using Cubase SX's Timewarp tool
http://www.soundonsound.com/sos/aug04/articles/cubasenotes.htm

.