I think I was more interested in knowing if the audio routing becomes different. For example, if I add insert effects etc. No worries, I will give it a shot and see if I hear any differences and inform here.
Thanks!
183,260 users have contributed to 42,288 threads and 255,032 posts.
In the past 24 hours, we have 5 new thread(s), 17 new post(s) and 54 new user(s).
If I'm not mistaken, the tutorial-example you mention is about two instances of MIRacle, one for the dry (but readily positioned) signal components, another one for the actual wet MIR signals. It's very likely that this will give you different results than one instance of MIRacle strapped accross the main mix bus, unless you match your levels carefully. :-)
Kind regards,
"Up is louder", as seasoned audio engineers have put it, back then. ;-D
Assuming that I don't misunderstand your question, you will bring up MIR's wet signal _and_ the MIRacle you've applied to it. It's important to understand that in this quite special case the "dry" signal (from MIRacle's point-of-view) is the wet output from MIR Pro, so make sure not to mute it - unless you're aiming for some kind of special FX.
Kind regards,
Switching from "Inline" routing to bus routing means that MIR Pro's wet signal (of this channel only) will be available separately, on any other bus you assign there. The readily panned direct signal component will remain on this channel.
Neither the relative level of the direct ("Dry") signal nor the room ("Wet") signal's level will change as long as you leave the bus you send the wet signal to @ 0dB.
This feature is meant to be used for stem exports and sub-grouping, actually, but it can be used for processing stunts with MIRacle, too, of course. ;-D
Kind regards,
Neither the relative level of the direct ("Dry") signal nor the room ("Wet") signal's level will change as long as you leave the bus you send the wet signal to @ 0dB.
Thank you Dietz. So if I understand correctly, adjusting that little circle, after switching to bus routing, controls how much of the MIR "wet" signal goes to the bus? And best to keep that circle @ 0 db? Sorry for beating this, but it has always been a source of confusion to me.... 😕
[...] So if I understand correctly, adjusting that little circle, after switching to bus routing, controls how much of the MIR "wet" signal goes to the bus? And best to keep that circle @ 0 db? [...]
Exactly.
... in 99% of all cases there's no need fo the extra rotary fader, actually. From MIR Pro's point-of-view the routing option would be sufficient ... I think it was the VE Pro software-engineers' way to say "See, that's some kind of 'send'- option, now." 8-)
Kind regards,
Wow, thanks Dietz. I tend to complicate things more than I need sometimes... 😛
I guess I need aux with post MIR. Which means (sorry gotta make sure):
All MIR dry positioning and MIR wet is applied and then signal is sent to the aux Miracle bus, and I can control how much Miracle I get by the little aux circle, correct?
[...]I guess I need aux with post MIR. Which means (sorry gotta make sure):
All MIR dry positioning and MIR wet is applied and then signal is sent to the aux Miracle bus, and I can control how much Miracle I get by the little aux circle, correct?
Exactly. The little blue rotary fader determines the Aux-send amount from an individual channel. The fader channel of the MIRacle bus sets the overall volume.
BTW: Make sure to mute the "Dry" signal within MIRacle in this scenario, otherwise your channel levels will get raised by the amount of Aux send received by it!
I just tried the above approach, and it does not sound/behave the way I thought it would. Basically, even if I push that little aux circle all the way to -60db I can still hear "Miracle" for that channel... My expectation was that I would not hear Miracle at all. The only way to achieve what I want is adding Miracle to the individual channels separately but I really want to avoid that.
I then decided to do the same thing with Miracle in Cubase (but without MIR Pro). And in Cubase it behaved exactly as expected.
Bottom line, why do I hear Miracle if I push the aux send on that channel all the way to -infinity?