JImmy that is true about the reverb. Also, maybe I should add that I never worry about phasing on solo instruments because I only use them as instruments in an orchestral context, so if there is some tiny amount of phasing on instruments which have very straight tones - like clarinet solo, solo non vibrato trumpet or trombone maybe - it is not detectable because another instrument is playing at the same time.  Maybe if you are going to do a clarinet concerto recording, with a very dry sounding solo upfront, it might be an issue to worry about a little. Though there you would want to "show off" the dynamic samples anyway.

However I have to add - the recorders are one solo library that actually does have zero phasing no matter how you crossfade them.  I determined that for sure on my recording "Song of the Forest"    http://www.vsl.co.at/Player2.aspx?Lang=1&DemoID=5995  which Herb suggested more crossfades on, which I added and had no phasing.   

Also, on the solo instruments it is good to use dynamic samples a lot, just because they sound so expressive in themselves and are in general more natural sounding.  And depending on the number of velocity layers on a particular instrument, you will have a smoother dynamic change with the dynamic samples than for example with a two velocity crossfade.   Though with ensembles even that is different, as I have noticed that the 8 horn ensemble legato - which has just two velocity layers - benefits from using crossfade very freely.

@William said:

... the recorders are one solo library that actually does have zero phasing no matter how you crossfade them.

How is that possible, unless it leaps suddenly from one velocity layer to the next, instead of fading between them? Don't cross-fades by their very nature play two layers at the same time? Isn't playing two layers at the same time what Jimmy is refering to when he writes, "doubling/chorusing"?

@BachRules said:

Where did you get the number 109? In the Velocity Histogram, I see lines which the VI manual calls "velocity split points" at 24 and 109, so maybe that's where you're getting the number 109? Plus, at 109 and higher it does sound to me like only one layer is playing, whereas I hear multiple layers in the range 99 - 109.

Confusing is that I hear multiple layers sounding when VelX is 29, but 29 isn't just below a "split point" -- it's just above one instead. I don't understand what a "split point" is then, since sometimes it's right below the chorusing, and other times it's right above the chorusing.

@Another User said:

But ultimately, it's probably better not to over-obsess over all of this.

It's not causing significant impairment in my social or occupational functioning, so I think it's not a mental disorder, and it's just me wanting to know which settings give me one oboe sample versus which settings give me two oboe samples. Kind of like a composer or conductor might care whether it's one or two oboes playing a part, and if he didn't care, he might not be as good a composer or conductor. They decided to give us velocity crossfades instead of velocity leaps. It is okay to ask exactly where the crossfades are occuring. This should upset no one, and if it does, then they are the ones over-obsessing.

There are so many people using so many systems where the number of samples playing at a particular velocity setting is no mystery. To dismiss the question as "over-obsession" would be an exhibition of disgraceful fanboyism.

@Another User said:

... I'm all for transparency and detailed information, and it would surely be nice to have some clarification from the people at VSL regarding this topic, especially since it isn't fully explained in the manuals. Crossfade phasing is an issue we are facing in this current generation of sampled instruments, and need to be able to work around....

Long time since I even had Velo XFade enabled for a solo instrument, but I did just now go to verify, using the Bb trumpet. 2-layer or 4-layer, there is a pronounced issue of phasing at every XFade so far, I can't use it. Dynamic samples all the way for me with a solo instrument. If it's a 'concertmaster' supposedly in front of a loud orch, maybe we can hide but I know it's there.

8Dio in that Adagio series has rhetoric as though they've gotten around this but I was confused and I think that workflow isn't for me, so...
I'm glad of the dynamic samples in the deeper libraries here.

@Another User said:

8Dio in that Adagio series has rhetoric as though they've gotten around this

@BachRules said:

With VelX on, doubling at occurs at settings not corresponding with the Velocity Histrogram, and at other settings I hear no doubling.

Well, I think it should be obvious, that, as the wole thing is called crossfade, there is not a leap from one CC-value to another, but a certain range in which two layers are actually x-faded. This usually should happen around the split points, but I guess the VSL team made little adjustments to best suit the individual patches.

@BachRules said:

Don't cross-fades by their very nature play two layers at the same time? Isn't playing two layers at the same time what Jimmy is refering to when he writes, "doubling/chorusing"?

@MassMover said:

... I guess the VSL team... to best suit....

@civilization 3 said:

Long time since I even had Velo XFade enabled for a solo instrument....

I hadn't realized it jumps between layers, instead of fading, when VelX is disabled. Now I hear that it jumps instead of fading when VelX is off.

Many sampled instruments have a sudden difference between a given velocity on note-on and the next, I can't let that bug me. I would rather deal with CC expression to smooth that out than have that phasing, which just sounds awful to me. Now, I'll expose the instruments and as an M.O. I write linearly/contrapuntally with monophonic instruments often so I don't really go for masking this sort of thing in the first place.

Hi, 

@BachRules said:

Is there any way to ask where exactly the crossfades are occurring without a bunch of people getting defensive?

This information is available in your Library Manuals in your User Area, each patch is documented with the split points in velocity.  

Best, 

Paul

@BachRules said:

Is there any way to ask where exactly the crossfades are occurring without a bunch of people getting defensive?

This information is available in your Library Manuals in your User Area, each patch is documented with the split points in velocity.  

Best, 

Paul

Thanks, I see that, but I am wondering where the crossfade ranges occur when VelX is turned on? In that case, there is a range of values inside which range two velocity layers play simultaneously. Looking in the manual I don't see where this range is.

After some experimenting, it seems the crossover range is roughly 9 values long, leading up to the split-point shown in the manual; and it seems this range doesn't have anything to do with the "velocity split points" shown in the Histogram. If that's correct, my question is answered. I am just hoping to know in general, so I don't have to run experiments on each patch individually to find the ranges. 

@civilization 3 said:

Many sampled instruments have a sudden difference between a given velocity on note-on and the next, I can't let that bug me. I would rather deal with CC expression to smooth that out than have that phasing....

I like that I have a choice between jump-points and crossfade-ranges; but I don't like having to run time-consuming experiments to locate the crossfade-ranges, as their location is undocumented. And the people who act like I slapped a baby if I ask where the crossfade-ranges are, because I am not supposed to admit there is a chorus-effect under some circumstances.

I was talking about orchestral useage with reverb, such as three solo trumpets with MIR, using crossfades. No phasing is audible.  No difference between dynamic samples except for expression, or personal choice.  But no technical problems whatsoever.

Bachrules, you ask how the recorders can have no phasing - don't ask me, ask VSL.  That is what I noticed to an amazing degree but you question it without ever trying it out. Fine, go ahead and don't believe me.   What do I know?  I will let you all figure this out to your satisfaction.  You all know far more than I ever could I'm sure. 

btw, Jimmy - thanks for noticing! 

goodbye Forum...

@Another User said:

There is no phasing with velocity crossfade in sustaining vsl instruments.  They are different samples, and do not phase at all.

Does VI Pro allow you to set your own crossfades?  Idk why I thought it did, but that would be pretty cool and would basically answer everyone's questions.

@William said:

... the recorders are one solo library that actually does have zero phasing no matter how you crossfade them.

How is that possible, unless it leaps suddenly from one velocity layer to the next, instead of fading between them? Don't cross-fades by their very nature play two layers at the same time? Isn't playing two layers at the same time what Jimmy is refering to when he writes, "doubling/chorusing"?

VSL only recorded a single dynamic for the sustaining articulations of the recorders (although they recorded two different dynamics for the shorts e.g. staccato).

Hence the velocity xfade on sustaining articulations is never crossfading between two different recordings, and hence there is never any 'doubling' audible (because there isn't any).  All the velocity xfade is effectively doing is turning up the volume with no change in timbre.

If you use velocity xfade on the short articulations of the recorders like staccato (not that you'd want to in practice - it is usually more intuitive to use velocity to control dynamics for short articulations) you WILL hear the doubling effect at the point where the two different dynamics recordings are heard at the same time.

@William said:

There is no phasing with velocity crossfade in sustaining vsl instruments.  They are different samples, and do not phase at all.