@Mattias Henningson said:

Now that's a good question! Soundcard driver is the most likely problem. My Echo cards are currently a no-go, but my Delta 1010 from the previous millennium have drivers. I'm setting one up here soon, but it will be on a separate removable disk. As I'm using Sonar I'm covered in that area as it's delivered as both 32-bit and native 64-bit since 5.0. They also have a technique to bridge the gap between 32-bit plugins and the 64-bit world that is supposed to allow you to use 32-bit plugins in the native 64-bit version. Does it work as advertised? No idea! What happens when you plug that Syncrosoft dongle into the system...only God knows! [:)] It's not my main production system we're talking about here of course but rather a development system.

/Mattias

However, it makes me wonder whether it would be possible to run the Slave PCs (via FX-Teleport) in 64bit and the Host in 32Bit. That way only the few apps on the slaves have to run 64bit. Hmmmmmmmmmm, am I that bored?

DG

@Mattias Henningson said:

As I'm using Sonar I'm covered in that area as it's delivered as both 32-bit and native 64-bit since 5.0. They also have a technique to bridge the gap between 32-bit plugins and the 64-bit world that is supposed to allow you to use 32-bit plugins in the native 64-bit version. Does it work as advertised? No idea! What happens when you plug that Syncrosoft dongle into the system...only God knows! [:)] It's not my main production system we're talking about here of course but rather a development system.

WOW!!! Thanx man thats a good point in the right direction!!!
I tested Cubase XP about 9 Month ago and everything worked fine except that Cubase is not really 64Bit it only runs in a dadapted 32 Mode. BUT!!! The Dongle Driver definatly works without any Problem and there are a few Soundcarddriver that work too.

So my Question: Could i use Sonar as a VSTi Host like V-Stack?
Could you test if its possible to route incoming Midi # to different VSTi´s
Cubase can do this just like V-Stack

Thanx!!!

Max from FX-Max says:-

@Another User said:

FXT will work on XP 64 as 32-bit application, supporting up to 4 GB of
memory (you'll need latest prerelese of FXT for >2GB support).

Ian

@Another User said:

FXT will work on XP 64 as 32-bit application, supporting up to 4 GB of
memory (you'll need latest prerelese of FXT for >2GB support).

Ian
Well, that's part of the puzzle sorted. Next [:D]

DG

@Another User said:

FXT will work on XP 64 as 32-bit application, supporting up to 4 GB of
memory (you'll need latest prerelese of FXT for >2GB support).

Ian

But can it load 32Bit Plug-Ins?

@Another User said:

FXT will work on XP 64 as 32-bit application, supporting up to 4 GB of
memory (you'll need latest prerelese of FXT for >2GB support).

Ian

But can it load 32Bit Plug-Ins?
It will all depend on what plugin and if they have native 64bit support, or are able to run in XP64 but only in 32bit mode. You need to check with the manufacturer for each and every plug that you intend to run.

D

Daryl...don't know if you're THAT bored, but you've seemed quite bored the past few weeks. [:D] Better get those builders out of your house and make some music........

Gagga...as FXT is a 32-bit application it will live like it does on a 32-bit platform, that is being able to load 32-bit plugins. As far as I know Sonar is the only released 64-bit host right now and the only one being able to load 64-bit AND 32-bit plugins. I really haven't used any re-routing of midi cc's as far as I can remember, but I'll try to check it out. As an example you mean from the same midi port and channel route cc2 to VSTi 1 and cc3 to VSTi 2?

/Mattias

@Mattias Henningson said:

Daryl...don't know if you're THAT bored, but you've seemed quite bored the past few weeks. [:D] Better get those builders out of your house and make some music........
/Mattias

Unfortunately my current project has been delayed for a few weeks, hence the messing around with PCs. Actually due to the failure of VSL to meet their release targets, I guess that it may have worked out for the best. The only downside is that the builders have been a bit slow as well, so even that project is delayed [:(] However, the windows went in today, so at least I have a room now......

I think that I may try this 64bit thing over FXT [[:|]]

D

@Mattias Henningson said:

Daryl...don't know if you're THAT bored, but you've seemed quite bored the past few weeks. [:D] Better get those builders out of your house and make some music........
/Mattias

Unfortunately my current project has been delayed for a few weeks, hence the messing around with PCs. Actually due to the failure of VSL to meet their release targets, I guess that it may have worked out for the best. The only downside is that the builders have been a bit slow as well, so even that project is delayed [:(] However, the windows went in today, so at least I have a room now......

I think that I may try this 64bit thing over FXT [[[:|]]]

D

Daryl,
Taken the pics yet?

[[[:|]]]

@hermitage59 said:

Daryl,
Taken the pics yet?

[[:|]]

Tomorrow morning; it will give me something constructive to do!!!

FYI:

I spent about 2.5 hours on the phone with my computer builder last night.
What an effort! We couldn't get the BIOS on my dual Opteron to take the 3 GB attempt and had an enormously difficult time getting the system back in shape. Finally, we restored things, but I was about a toe away from having to reinstall Windows XP.

From my experience, be careful! And make sure that you, or someone you're working with, really understands this stuff.

Here's to a fully functional Vista set up!

Gary

@garyeskow said:

FYI:

I spent about 2.5 hours on the phone with my computer builder last night.
What an effort! We couldn't get the BIOS on my dual Opteron to take the 3 GB attempt and had an enormously difficult time getting the system back in shape. Finally, we restored things, but I was about a toe away from having to reinstall Windows XP.

From my experience, be careful! And make sure that you, or someone you're working with, really understands this stuff.

Here's to a fully functional Vista set up!

Gary

Was it a problem with not accepting the RAM, or were you tryiong to install the /3Gig switch?

DG

@garyeskow said:

We couldn't get the BIOS on my dual Opteron to take the 3 GB attempt and had an enormously difficult time getting the system back in shape. Finally, we restored things, but I was about a toe away from having to reinstall Windows XP.

Sorry to hear about your problem and this is unfortunately too late now, but for other users trying the same thing...

This is exactly why you always should COPY the line in boot.ini (as outlined here http://community.vsl.co.at/viewtopic.php?t=7952">http://community.vsl.co.at/viewtopic.php?t=7952). That way you get a dual boot with a /3GB and a non-/3GB system and you have a safe route back if the machine doesn't boot with the /3GB switch enabled.

/Mattias

Sorry to hear about your problem and this is unfortunately too late now, but for other users trying the same thing...

This is exactly why you always should COPY the line in boot.ini (as outlined here http://community.vsl.co.at/viewtopic.php?t=7952 ). That way you get a dual boot with a /3GB and a non-/3GB system and you have a safe route back if the machine doesn't boot with the /3GB switch enabled.

/Mattias

That's exactly what we tried... exactly. However, rebooting the FIRST time after copying the boot.ini line caused a crash we couldn't get past. Ultimately, I got the system to read off of the DVD drive and work its way past the problem, at least to the point where I could rewrite the line in question. Chris, of ADK Pro Audio... who's great... says that something in the BIOS setting was causing a conflict.

Thanks!!! and any comments on the string quartet I just programmed using VI and Solo Strings would be appreciated... http://garyeskow.com/xray.html

Gary