Hello Barton!

In Sibelius I recommend adding Vienna Ensemble. You can load Synchron Player inside Vienna Ensemble.

For SYNCHRON-ized Dimension Strings, please add instruments from the Sibelius "Add or Remove Instruments" menu with “[VSL Dimension Strings I]” at the end and programs on the Manual Sound Sets page with “SYzd Dimension” at the beginning of the name. If you are unsure what to load for the "VE Strings" sound set, you can always check in the "Optimizing Sibelius Playback" manual at the beginning of the "VE Strings" chapter.

You can find more possible reasons and solutions for your problem in the Troubleshooting chapter.

https://www.vsl.co.at/en/Notation_Related

Best regards,
Andi

Hi Barton,

Our Sibelius specialist Andreas is on his well-earned holiday right now, but if you send us a few screenshots that show the essentials of installation as shown in the Sibelius manual, we can probably find out what's going on: support@vsl.co.at

Best,
Paul

Hello all,

I just installed the whole Synchron package from the official VSL Synchron hard drive, and it took my computer more than 27 hours.

• iMac Pro – macOS 10.5.2 – 3 GHz 10-core Intel Xeon W – 64 GB RAM
• Destination drive: 4 GB Samsung 860 QVO, formatted MacOS Extended (Journaled), connected by Thunderbolt 3
• No anti-virus software whatsoever
• No other applications running

During the whole installation process, only one of the 10 cores showed an utilisation of 10–15 %, the other cores were completely idle.

So I think there is still room for improvement...

All the best

Pierre Funck

Hi Pierre, 

Shouldn't take that long. How was the Synchron HD connected? Could it be that you were using USB 2?

Best, 
Paul

Dear Paul,

with the USB cable that came with it, connected directly to the iMac Pro...

All the best
Pierre

very very very slow process! I cannot install the library! please correct this bugs!!!

Hello cane, 

Could it be that you are downloading from behind a firewall (company / university) or are working with a severe anti-virus program? This could block torrent-based downloads, which is the technology we are using for our sample downloads. 

Did you check and download from another location?

Best,
Paul

Just chiming in on this thread - bought Sychronized solo strings today, and am experiencing a ridiculously slow install (as in, at this rate, this will take the entire weekend). 

I'm on a 2018 Macbook pro 13", w/ two external SSDs. I've installed tons of VI libraries, and also a few Synchron ones (Epic Orchestra, and a couple of the Big Bangs) and Install was always a quick affair. 

I've seen a few posts on this, and was just wondering if there was a solution or at least some state-of-the-art troubleshooting tips? 

Hi Daniel, 

The download rate always depends on a few factors... the route of the data being the most important one. 

What is your download rate?

Best, 
Paul

Hi!

You mentioned two external SSDs. Those are mostly formatted with exFAT.
exFat and other FAT formattings are known for bad performance under MacOS in these scenarios.
To solve this you have to reformat your SSD and use another formatting.

Best, Ben

Ah... 

Interesting! They're the same type of drive, but it's true, the one I am loading onto is formatted to EXFat. 

Ach... at 71% is it worth stopping, clearing the drive, reformatting, reloading, and starting over? (I am guessing... yes) 

Yes :)

Just be aware that formatting deletes all data on the drive.

I'm having the same problem. Downloading is no problem, but the install procedure seems to stop at 11% Finally I tried it onto other harddisks, but no improvement either. So I let it run for a whole night (just the 1st violins library) In the morning it was only at 29 % I changed disks today again and started over. It now seems to install faster, but I don't understand why, because I'm using the same kind of harddisks (SSD formatted MacOs journaled extended volume). as well for the download as for the install. What I do see is that the ram get's filled up quite often (I have 32 Go Ram) So perhaps it is the way Vienna download and install manager deals with memory? Just an Idea :-)

Hi Akrinos, 

Any Anti-Virus program in the way that could block installation? Sounds to me like every installed byte is being inspected... 

Best, 
Paul

Hi

Same problem here on a Mac HFS+ formatted drive on a 2020 macPro. This machine is doing NOTHING else and I am stuck at 1% for hours. I am running Catalina, which I suspected immediately. But after reading these various posts it is clearly trouble at the VSL end. 

This installer is CLEARLY broken and needs an update. 

If it doesn't install overnight I will be getting refund for this library. I bought it as an experiment to see if VSL has developed - what a disappointment. 

FYI this computer can write to disk at 6000MB a second. It has 24 cores. This install of about 120GB of data should be very very fast.

Ben 

Hi Ben,

During the installation not only files are copyed over, but all downloaded material is highly compressed and needs decompressing first.
Please make sure no other big processing is going on at the same time as well as massive disk writes (for example OS updates).

Because of the size and compression level of this library the installation takes longer compared to the BBO libraries, but it should still install in reasonable time.

Best, Ben