194,346 users have contributed to 42,916 threads and 257,955 posts.
In the past 24 hours, we have 2 new thread(s), 12 new post(s) and 83 new user(s).
I am trying to do some live recording and I setup up Sonar with an audio track with VEP Audio Input as an insert. When I do that I get a crackoing sound through the mic. When I remove VEP Audio Input and insert any other reverb effect it works fine.
Any ideas why when I insert VEP Audio Input I am getting noise?
Mike
Dietz,
My audio interface latency is set to 128. MIR is set to 256 (if I go any lower it stops working.) I have triwed setting my audio interface to all latency settings between 128 and 512 and nothing made it better.
Instruments come through in real time just fine. Also, when I recording with a mic going through MIR, even though there is a crackling sound whiole the mic is armed in record mode, tghe crackling stops when I actually start recording and it is also not present during playback. It only seems to happen when I have a audio track armed for recording but have not actually begone recording.
Hope this info helps.
THanks,
Mike
Hi Mike,
Please increase the latency of your audio system. And like pointed out on p. 8 of MIR Pro's manual, there are actually two numbers to take into account here, namely the host buffer size and MIR latency setting. The latter should either be 0 (zero) or a number greater than the host buffer size. MIR latency below or equal to the host buffer size will give you troubles.
HTH,
@Dietz said:
Please increase the latency of your audio system. And like pointed out on p. 8 of MIR Pro's manual, there are actually two numbers to take into account here, namely the host buffer size and MIR latency setting. The latter should either be 0 (zero) or a number greater than the host buffer size. MIR latency below or equal to the host buffer size will give you troubles.
Dietz,
I changed the MIR latency setting to 0. I lkeft my audio interface at 128 (if I go any lower I can't get MIR to work.) Concerning the buffer settings, do you mean the initial buffer settings in the VEP5 Server Interface window? It defaults to 2, should I set that lower or higher? The zero latency setting in MIR took care of the noise issue.
Also, I notoce that the screen cap in the manual of the MIR preferences is different from what I see. The manual screen cap s shows 4 menus..."General", "Audio/Midi"', "plugins"' and "MIR", my window is missin ghte "general menu." I am running the latest version 5.0.10738. Why would I be missing the general menu?
THanks,
Mike
p/p
If you encounter crackles already, a system latency of 128 is _very_ optimistic. ;-) Usually, I start with 512 or 1024.
Leave the server buffer-settings at their defaukt value for now. I'm talking about the MIR engine's own latency setting sin the Preferences window (... they should be set to a value higher than the system latency when you're still hear crackles or dropouts).
You have a "General Prefences" menu only in stand-alone mode of VE Pro, not in server mode. In server mode, the host takes care for the communication with the outside world.
Kind regards,
