Vienna Symphonic Library Forum
Forum Statistics

190,080 users have contributed to 42,705 threads and 256,972 posts.

In the past 24 hours, we have 3 new thread(s), 41 new post(s) and 43 new user(s).

  • Ensemble Pro and Server and WiFi and Ethernet?

    We are using Ensemble Pro 64 Server on our two Mac Pro system one Master and one Slave. Digital Performer is the DAW on the Master. We have Airport active and also use Ethernet 2 and Giga Bit switch. The Ensemble Server Pro should use the Ethernet not the AirPort but it does not choose the right network. It chooses AirPort.

    What settings do we need to set this right?

    We have operation, if we turn the Air Ports off and use Server then it connects on the ethernet and works well.

    But we like the Air Port connected for internet as the router is a not close by.

    But when we have both the AirPort and the Ethernet 2 active Ensemble Ensemble Server wants to use the AirPort. How do we force it to always use the Ethernet 2 connection on the Mac Pro?


  • When connecting to the VE Pro Server from the VE Pro Server Interface plugin, you should see both the Airport and ethernet IP's listed between the slaves. You should just select the ethernet IP.


  • You're right. We had some IP settings that were not helping, it was only seeing the Air Port. We were using 192.168.1.xxx IP address on both the Air Port and the Ethernet. But we changed the Ethernet to 192.168.2.xxx and now we see the two networks and can choose the Ethernet. Thanks.