Andi, thanks, I actually found that area and did watch the video.  I can set up sound sets in Sibelius, switch over to VE, load the patches, save everything correctly and get the correct instruments to load and play in Sibelius.  Right now though, all the attacks on the strings sound terrible, almost as if each note sound file is playing backwards, because I can't switch the articulations correctly.

The problem I'm having is I can't find documentation in either Sibelius or VE about switching articulations.  I know some articluations come predefined in the VE Sibelius XML file (I'm assuming that's where it is.)  So if I write pizz. for the strings, VE switches to pizz. 

I also know that you can edit the Sibelius playback dictionary to add custom text to trigger articulation changes, set expression markings, etc.  What I can't figure out or find any documentation on is what is the command syntax that references the correct cell in the matrix, and how I enter that command directly into a staff in my score.

Same question for the dictionary.  Suppose I want harmonics in the playback dictionary to mean, switch to harmonics.  Again, assume there is no entry for harmonics in the dictionary already.  So I type harmonics for the name and what do I enter for the command to switch to violin matrix C1?

I hope my questions are clear.

Every patch of the Special Edition matrices can be reached with the appropriate marking or text in the score.
However, if you want to use MIDI commands (keyswitches and Control changes), that's also possible. To be honest, I don't know why you would want to do that, but here is how anyway.

Keyswtiches:
~Nxx,64 followed shortly by ~Oxx,64
These are MIDI commands for Note on and Note off. xx stands for the MIDI number of the Keyswitch. (24=C1, 25=C#1, ...)

Control Changes:
~Cxx,yy
For example ~C1,127 would send value 127 for MIDI CC 1 (=Mod Wheel)

For further details on MIDI commands in Sibelius see the Sibelius manual chapter 4.15.

By the way. If you are using Sibelius 5.2, I strongly recommend updating to Sibelius 5.2.5, which solved some playback issues.

Best,
Andi

Andi: 

Thanks for your help so far.  I've made tremendous progress using your advice.  I do have the latest version of Sibelius and VE.  A couple points I need clarification on:

When setting up a configuration, should I use the Special Edition presets, or individual patches?  I seem to have more trouble with the presets with articulations.  I'm also having trouble loading 2 instances of VE ( I have more than 16 instruments.)  When I use presets, I can't get the instruments assigned to the 2nd instance to sound.  (cellos and basses, in this case.)  If I switch them over to orchestral strings cellos and basses, they work.

When using invidual patches (orchestral strings violins, for example) I seem to be limited to one note per staff.  If I divisi, the top note drops.  Is this a limitation on RAM on my machine (Macbook Pro 4gb ram)  I don't seem to have that problem if I use SE presets.

Some instruments occaisionally won't play until the end of a note.  For example, I have a whole note written for the flute, but it plays only a quarter note.  Inserting a sustain or legato doesn't seem to fix it.

Thanks

Jay Brennan

Hi Jay!

The Special Edition sound set is designed to go with the matrices (not the presets) that come with it.

When using more instances of Vienna Ensemble, don't forget to set channels and programs for all instances on the Manual Sound Sets page. You can switch between the instances in the "Device:" line on that page.

Our legato patches are monophonic. So if you write a slur (which triggers the legato patch), you are are indeed limited to one voice. The other patches are polyphonic. If you want to notate more voices in one staff with a slur, you can exclude the slur from playback and thus avoid switching to legato. To do so, select the slur and go to the Properties windows/Playback. Uncheck the boxes for play on pass 1-8.

Best,
Andi

Andi:

Thanks so much for all your help.  I don't have any problems with multiple instances of VE; that seems to be working fine.  With your help, I'm making great progress.

That note dropping problem I mentioned, where some notes won't play their full duration, seems to have to do with Sibelius and slurs.  If I slur to a whole note, the whole note stops playing about half way through.  If I move the slur so it doesn't affect the note, the note sounds for its full duration.  Not sure if that's a bug or not.

As for divisi, can I get around that problem using multiple staffs for those parts?  Does any VE product offer polyphonic legato patches?  I was planning on investing in SE2 to get the string harmonics.

Thanks

JB

If you put the divisi strings on two staves, you can play both voices legato. Don't forget to reserve two channels for these strings on the Manual Sound Sets page and in Vienna Ensemble.
Because of the automatic interval analysis in the legato patches, they can only be monophonic - in all our products. The harmonics included in the Special Edition PLUS you have mentioned are no peformance legati and therefore polyphonic.

The flute legato notes are not looped and so end after some time. In cases where they are too short for you, please exclude the slur from playback as described earlier. Then the sustain patch with looped samples gets triggered.

Andi

@andi said:

Every patch of the Special Edition matrices can be reached with the appropriate marking or text in the score.

I just purchased SE2 Strings to get harmonics, and I am having the same problems.  Inserting text or using diamond noteheads has no effect.  It plays as legato

For the Special Edition PLUS you will need the Special Edition PLUS sound set. If you haven't done so yet, you can download it at the following location:
http://vsl.co.at/en/68/375/460/295.htm

Harmonics can be reached by two ways.
1.) Add the Harmonic/Open articulation sign to the note (that's the small circle).
2.) Write "harmonics" above the note, where a section of harmonics starts. This section can be ended by one of the folloing commands: "ord.", "normal", "natural"

As for the trills, they should be triggered as one note samples. If you are still using the Special Edition sound set instead of the Special Edition PLUS sound set, they can't be triggered because trills are not included in the Special Edition.

Best,
Andi

@andi said:

For the Special Edition PLUS you will need the Special Edition PLUS sound set. If you haven't done so yet, you can download it at the following location:
http://vsl.co.at/en/68/375/460/295.htm

Harmonics can be reached by two ways.
1.) Add the Harmonic/Open articulation sign to the note (that's the small circle).
2.) Write "harmonics" above the note, where a section of harmonics starts. This section can be ended by one of the folloing commands: "ord.", "normal", "natural"

As for the trills, they should be triggered as one note samples. If you are still using the Special Edition sound set instead of the Special Edition PLUS sound set, they can't be triggered because trills are not included in the Special Edition.

Best,
Andi

Oops, I take that back. I'm still having problems. My wind choir trills properly now. But, in a separate score for string orchestra, I still cannot get harmonics to play back properly. I did install the SE+ Soundset, and updated the performance Dictionary as told in the help file. I made sure my manual soundset was set up properly, plus I made sure everything in the Sibelius mixer was on the correct channel. But now, not only do the harmonics play the same patch as before, but I can't get anything except the first and second violin sections to play back at all (MIDI channel 1 and 2). The violas, cellos, and basses are not playing a note, even though they work when I hit the "Test" button in the Playback Devices window.

I haven't got a clue what is going on.

Can you tell me exactly what settings you made on the Manual Sound Sets page?
What output do violas, cellos and basses go to when you hit play?
For the orchestral strings you need the Orchestral Strings Programs (Violins Orchestral, Violas Orchestral, ...). Also don't forget that if you have one section more than once in your score, you will also have to reserve two channels for it in the manual sound sets page.

Andi 

@Another User said:

What output do violas, cellos and basses go to when you hit play?

That's strange. Do they really go to Vienna Ensemble? Can you check up the channels 3-6 in Vienna Ensemble on arriving MIDI signals during playback? You can see it in the "bull's eye" of the Vienna Instruments.

Andi

This sounds a bit mysterious to me. Please do the following things to follow the signals during the playback.
1.) Open the Sibelius mixer.
2.) Take a look which output AND which channel the instruments go to (before AND during playback)
3.) Take another look which channels are set in Vienna Ensemble. They should be the same as on the Manual Sound Sets page.

If everything is set up right and things keep going wrong, you could try to create the instruments again in Sibelius and then cut and paste the content of the old staves to the new ones. That might help.

Andi

I've about given up trying to get harmonics to work.  Even when I create a new score with one staff and one instrument, create a new playback configuration, create a new VSL configuration, harmonics still won't work.  No matter how I notate harmonics, the legato patch always plays.  So I want to go back to basics:

in the playback configration, i have:

Vienna Instruments AU

Vienna Ensemble AU

VSL VST

Vienna Ensemble VST

I am using Vienna Ensemble AU.  Is that correct?

In manual sound settings, under sound set, I have

VE Speical EDITION

VE SPECIAL EDITION PLUS

VSL Ensemble Special Edition

VSL Special Edition

Which one should I use?

All string patches are orchestral strings.

In the user library application support/siebelius software/sounds directory, I have two files:

VE Special Edtion (Sib 5.2).xml and

VE Special Edition Plus.xml

Hello Jay!

Yes, Vienna Ensemble AU is the one to choose on Mac

I took a look at your records. You registered the Special Edition Standard and the Special Edition PLUS Strings Standard.
This means you have the PLUS content for the strings and the SE content for brass, woodwinds and percussion.
As a consequence you will need the VE Special Edition sound set for the winds and percussion and the VE Special Edition PLUS sound set for the strings. This also means, that you need two activated instances of Vienna Ensemble when combining wind and string instruments in one score.

Harmonics are working fine on my machine. I guess you combined the wrong sound set with the wrong string matrices. Please use the VE Special Edition sound set with the normal matrices and the VE Special Edition PLUS sound set with the + matrices.

The sound sets "VSL Ensemble Special Edition" and "VSL Special Edition" are older sound set versions. You don't need them.

Best,
Andi