Thanks a lot, I have done just that and now it works fine...finally I can begin attempting to edit my very first pieces in Cubase. DG they should pay you a vsl salary for all the help you do ;-)
-
Ah CRAP! I celebrated too early. No it still doesn't work. Though I must be right on the verge of getting it to work. I thought I heard sounds playing the first time I tried it but now it doesn't seem to be working.
Now I am able to get the imported midi into midi tracks rather than instrument tracks. However when I open vienna ensemble from the F11 console, the vienna ensemble instance that opens up is strange in that when I load a patch into it, I cannot play the patch on the screen by clicking on the white keys with my mouse as I normally could if it was loaded with Sibelius or stand alone. Then when I try to route it to a channel in Cubase and choose VE in the inspector in Cubase for one of the instruments and try to route it to the V.E. channel, nothing plays. I see in Cubase the volume graph going up and down as if something is playing but there is no sound coming out.
[IMG]http://i18.photobucket.com/albums/b101/theheresy/Cubase7.jpg[/IMG]
Here you can see a screenshot of flute, oboe, and clarinet in cubase I've hit "solo" and played them, you can see the volume graph is spiking but no sound is coming out as it plays. Meanwhile vienna ensemble is open and has several instruments loaded.
-
1. Look what hardware you have selected to be used by Cubase (... that has to be done in "Devices > VST").
2. Assign Cubase's own outputs to "real" hardware outputs (... that can be done in the "Connections"-window. You get there by pressing F4 by default).
3. Make sure that some kind of monitoring is assigned to these outputs.
HTH,
/Dietz - Vienna Symphonic Library -
You guys have both mentioned (DG and Dietz) about going into F4 (devices>vst connections and checking the outputs and setting a "monitoring" hardware device of some sort. I have no idea what you mean by this as I have no idea what possible "hardware monitoring" device it could possibly require.
Here is a screenshot of my F4 screen as you can see it does not allow me to 'set' or add anything because it says 'no connections' there.
[IMG]http://i18.photobucket.com/albums/b101/theheresy/Cubase8.jpg[/IMG]
And DG to answer your question I tried to do what you said and imported an mp3 track and hit play and it didn't play and there was no wave graphic action visible either so somehow it's not playing at all. However if I import a midi, those do play, just not when I route them to VSL.
[IMG]http://i18.photobucket.com/albums/b101/theheresy/Cubase9.jpg[/IMG]
It seems perhaps the problem is something in that F4 Devices>VST Connections window because both of you have now mentioned something needs to go there but the question is what? As you can see I cannot select anything in there, it simply says "Audio Device: Not connected".
-
OK, this is all covered in the Cubase "Getting started". this has nothing to do with VSL. It is that you haven't set up Cubase properly. I suggest that you get your soundcard installed/enabled, make sure that you play audio files back and then come back here for VSL help. There is no point in doing anything MIDI related until you can actually get some sort of sound out of your soundcard.
Actually, my best suggestion would be to get someone round to your place to show you how all this stuff works.
DG
-
Brian,
just click on "Not Connected" below the "Devices"-headline, and choose the proper device. Now select the appropriate outputs from the next column at the right. This should do the trick. Don't forget to connect the Vienna Instruments to this Bus.
.. and Daryl is right: While it is no actual problem (neither for the VSL nor regarding the forum rules) to ask DAW-related questions here, you will get more precise and faster help from the Cubase forum, or from a Real Human coming to your place to sort all the basic things out.
All the best,
/Dietz - Vienna Symphonic Library -
Well thanks for to help guys. But just to clarify, I do have sound out of my sound card, I purchased this new computer several months ago and have been happily composing with it just fine using VSL + Sibelius. I can listen to sound in any way I want, even Cubase plays back sound when I import a midi and play it back just with the General Midi sound samples. The only time it stops playing sounds is when I try to route it to VSL or when I import a .wav/.mp3 and try to play that for whatever strange reason that's why I thought it was more VSL related. Obviously if my computer had zero sound at all for months even I wouldn't be that dense enough to realize there was something far more seriously wrong with my sound card LOL...
Dietz as for clicking on "Not connected" and choosing a device, well as you can see from my screenshot, when I click not connected I am not given any choice for any device. At the least it seems that perhaps you guys have helped narrow the problem down to a possible driver problem, i.e. maybe I don't have an updated device driver for my sound card installed so I am going that route right now trying to install all the updated drivers so we'll see what happens with that. As for getting someone to come over to 'set it all up' believe me if I knew such an expert, I wouldn't have been on this forum for literally a week already. You see Cubase arrived on Monday and it's already Sunday and I still haven't been able to use it so I've been wrangling with it all week and been on about 3-4 other forums including steinbergusers.com/forums, cubase.net, kvraudio.com etc and it seems at the least that you guys have narrowed it down so I am optimistic that I should soon be able to solve this.
Thanks
-
Well guys I think we did it! You're geniuses! I went back to the manual as suggested by DG and I guess I was speed reading through both manuals too fast cus I missed this one set up part so I went into devices>setup and it showed no hardware device..upon contemplating what you've said and others have said on other forums it seemed to me that my card was missing a driver that was preventing it from being recognized by Cubase as such I downloaded the ASIO driver which apparently I didn't have and now Cubase recognizes my hardware...awaiting testing to see if the sound actually works now though. Will report back soon.
-
Ok well it still doesn't work BUT I think I'm right on the verge of getting it to work. As I said I downloaded the ASIO4ALL universal ASIO driver as evidently my computer didn't have one. And now I am playing with the different configurations and for once my VSL instance is responding to the midi being played in Cubase, i.e. the actual Vienna Ensemble instance has its keyboard playing and the wave graph jumping up and down indicating that sound is being processed in it, I just don't hear any sound. Same goes for the Cubase: 1. when I import a wav or mp3 file into Cubase it now plays it and I can hear it. And when I route a midi track to VSL from Cubase, the wave graph jumps up and down indicating that sound is being processed, I just can't hear any sound so something is just being set up wrong by me but I feel I'm on the verge of figuring it out.
I just don't see why in the settings in Cubase my sound is coming up as SB Live! when I have SB Audigy
-
@requiem_aeternam7 said:
Ok well it still doesn't work BUT I think I'm right on the verge of getting it to work. As I said I downloaded the ASIO4ALL universal ASIO driver as evidently my computer didn't have one. And now I am playing with the different configurations and for once my VSL instance is responding to the midi being played in Cubase, i.e. the actual Vienna Ensemble instance has its keyboard playing and the wave graph jumping up and down indicating that sound is being processed in it, I just don't hear any sound. Same goes for the Cubase: 1. when I import a wav or mp3 file into Cubase it now plays it and I can hear it. And when I route a midi track to VSL from Cubase, the wave graph jumps up and down indicating that sound is being processed, I just can't hear any sound so something is just being set up wrong by me but I feel I'm on the verge of figuring it out.
I just don't see why in the settings in Cubase my sound is coming up as SB Live! when I have SB Audigy
OK, now we're getting somewhere. If you can hear sound when you play an audio file, then that means that there is nothing wrong with the audio set-up. So finally we can talk about VSL. [:)]
- When you look at the circle in the middle of the VSL GUI and see all the action, do you see two coloured circles jumping up and down, or just one?
- If two then it means you are both receiving MIDI and producing audio.
- Assuming that the above is correct, then check that the output in VE is set to 1/2. It doesn't have to be, but let's start at the beginning.
- Go back to Cubase. Check the mixer. You should see a VST Output channel for Vienna Ensemble. It should have some action when you hit play. Note that this is a VST output, not a MIDI channel. Make sure that you know the difference.
- Assuming that all is OK so far, find this channel in the mixer and look at the top. You should see a little horizontal slot. If it says "No Bus" it means that you haven't routed this channel anywhere.
- Click here and you will be given your options. Hopefully one of them is your main monitor outs. Click this, and you should be ready to Rock 'n' Roll.
DG
-
GOD BLESS AMERICA!!!!!!!! GOD BLESS VIENNA!!!! I love VSL and CUBASE! IT WORKS!!!!!!!!!!!!!!!!!! HALLELUJAH!!!!! I never thought my retarded old self would get it to work!!! Bless you both DG + DIetz please give me your paypal account for a large lump sum donation!!!!
Ok kidding on the paypal thing, I would if I was rich !
