Thanks David,
I see that I can use the cool ram optimizer for learning which samples are used in the piece and the pluggin will drop the others to save memory. Very cool.
How does the Universal mode work? I watched the video but it didn't say if this was a special mode or is it just a preselected matrix?
Thanks again, I'm glad I purchased this, it's just hard to have to wait till March to see it [:(] Although I do prefer to wait if it means it will be better.

@david ender said:

If you want a full orchestra with heaps of articulations at once, you'll need more than one computer.

Regards,

David
VSL manuals

Is that so for Mac users, too?

Come to think of it, nothing in this thread mentions Macs at all. Prior to VI a single G5 had no problem with "full orchestra with heaps of articulations" (as long as it used EXSManager).

Now that EXSManager is obsolete, what can you tell us about the performance of VI on a Mac system? Have you or anyone at VSL tried it? Is it true that of all of the VI demos so far, none have been made on a Mac?

- Paul

@david ender said:

If you want a full orchestra with heaps of articulations at once, you'll need more than one computer.

Regards,

David
VSL manuals

Is that so for Mac users, too?

Come to think of it, nothing in this thread mentions Macs at all. Prior to VI a single G5 had no problem with "full orchestra with heaps of articulations" (as long as it used EXSManager).

Now that EXSManager is obsolete, what can you tell us about the performance of VI on a Mac system? Have you or anyone at VSL tried it? Is it true that of all of the VI demos so far, none have been made on a Mac?

- Paul

This depends on your definition of a full orchestra. As the maximum that Logic can see is about 3.7 Gb, but I load way more than that in my Giga farm...! By your definition none of my computers would have a full memory.

DG

@david ender said:

If you want a full orchestra with heaps of articulations at once, you'll need more than one computer.

Regards,

David
VSL manuals

Is that so for Mac users, too?

Come to think of it, nothing in this thread mentions Macs at all. Prior to VI a single G5 had no problem with "full orchestra with heaps of articulations" (as long as it used EXSManager).

Now that EXSManager is obsolete, what can you tell us about the performance of VI on a Mac system? Have you or anyone at VSL tried it? Is it true that of all of the VI demos so far, none have been made on a Mac?

- Paul

This depends on your definition of a full orchestra. As the maximum that Logic can see is about 3.7 Gb, but I load way more than that in my Giga farm...! By your definition none of my computers would have a full memory.

DG

I don't have a definition (so I don't understand your last sentence), although I do have several demos on this very site ... all of which are inarguably full orchestra, and all of which were made on a single Mac.

Still, no Mac-related info pertaining to this thread's subject [*-)]

Sorry, I'm not being clear. All I was trying to say was that there is no way that I could use all the articulations that I want to for a full orchestra on one Mac.

However, on that subject, I believe that it has been mentioned that VI is more efficient than EXS, so if this is true you will be able to load more within Logic than you do currently.

DG

I see. If you're like me, there aren't even enough articulations TO load yet [[;)]]

I'm curious if you know that one Mac won't be enough (for you) out of direct experience, or if you're going by what knowledge you've gleaned from this site and other people?

Still, to return to the topic ...

I'm eagerly awaiting the VSL's answer to the original question, but from the perspective of a Mac environment ... If anyone at VSL has actual experience using VI on a Mac (full orchestra, please, not just those unrealistic, single-instrument demos), it would be great to know about it. (It would also be good to know if NO ONE at VSL has had such experience yet.)

Paul

Well,

not being a Mac owner, I have no first-hand experience, but there's people who do. Probably you'll get more concrete answers when they've returned from the NAMM show.

Anyway, Vienna Instruments runs on Mac and PC alike, the only difference being that the Mac is somewhat ahead with its RAM addressing system so you can load more instruments and get a "fuller" orchestra on a single Mac than on a single PC (provided I understood that rightly).

There's no more BASIC INSTRUMENTS (with only two velocity layers of the major articulations) in VI but the sample management is pretty cool. The major asset for me though is that you're much quicker because you don't have to fiddle around so much to get what you want, and can concentrate on the music!

Cheers,

David
VSL manuals

@david ender said:

Anyway, Vienna Instruments runs on Mac and PC alike, the only difference being that the Mac is somewhat ahead with its RAM addressing system so you can load more instruments and get a "fuller" orchestra on a single Mac than on a single PC (provided I understood that rightly).
Cheers,

David
VSL manuals

David, I think that I've understood that, but as I'm intending to use VI via FX-Teleport, and therefore not strictly speaking within a sequencer, I should be able to load almost up to my RAM limit (leaving some for XP to run on, of course), as each instance should theoretically be able to load up to 2Gb. Please tell me if I've got this wrong.

DG

@paulhenrysmith said:

I see. If you're like me, there aren't even enough articulations TO load yet [[;)]]

I'm curious if you know that one Mac won't be enough (for you) out of direct experience, or if you're going by what knowledge you've gleaned from this site and other people?

Paul

No, I have no first hand knowledge; I'm going by what I have read on this site. FWIW I use one machine for Strings (Pro Edition Cube/Performance Set, Chamber Strings, Solo Strings) one for WW and some Brass (including Epic Horns, French Oboe/CA/Eb Clarinet and WW Ensembles) and the other machine for the remaining Brass, Percussion, Keys and other odds and sods. I also have a K2 machine for samples from EW/Spectrasonics and others.

I doubt that I could run my full orchestral template from 1 Mac; even if I could load enough samples I would be in danger of running out of Polyphony, never mind plug-ins (reverb etc.).

DG

Yes, you certainly should. They're still stress testing at VSL, but the results up to now are pretty good - should be published quite soon, but I don't know how close to completion they are.

I have a PC with 2 GB RAM - with Cubase running (and IE as well as an old project loaded, because I checked it just now), there's still about 1.3 GB left which I can fill to the brim - one should leave 100 MB free, though - performance might suffer.

Regards,
d.

@Another User said:

Anyway, Vienna Instruments runs on Mac and PC alike, the only difference being that the Mac is somewhat ahead with its RAM addressing system so you can load more instruments and get a "fuller" orchestra on a single Mac than on a single PC (provided I understood that rightly).

There's no more BASIC INSTRUMENTS (with only two velocity layers of the major articulations) in VI but the sample management is pretty cool. The major asset for me though is that you're much quicker because you don't have to fiddle around so much to get what you want, and can concentrate on the music!

Cheers,

David
VSL manuals

Yes, David, that is the main point ... not having to fiddle around, so we can focus on the music. That, obviously, is why I want to be sure that scrapping the old EXS/Pro Edition setup and using VI will not be a giant mistake, or step backwards, requiring more unanticipated hardware purchases to rectify.

Looking forward to hearing from that (those?) Mac tester(s)!

- Paul

Ten days later and nary a peep from VSL?

@DG said:

No, I have no first hand knowledge; I'm going by what I have read on this site. FWIW I use one machine for Strings (Pro Edition Cube/Performance Set, Chamber Strings, Solo Strings) one for WW and some Brass (including Epic Horns, French Oboe/CA/Eb Clarinet and WW Ensembles) and the other machine for the remaining Brass, Percussion, Keys and other odds and sods. I also have a K2 machine for samples from EW/Spectrasonics and others.

I doubt that I could run my full orchestral template from 1 Mac; even if I could load enough samples I would be in danger of running out of Polyphony, never mind plug-ins (reverb etc.).

DG

DG-- we Mac uses must stick together. I'd like to know more about your setup. Maybe you've posted this info already in another thread. If so, please forgive the redundancy questions.

My curiosities:
-- your cpus, speeds, ram allotments..
-- midi and audio latency, sync reconciliation
-- audio cards, interfaces
-- surround projects?
-- networking using Airport? Yes? No? Good? Bad?
-- Wormhole or other applicaion?
-- Thoughts on X-Serve as a network solution?

It seems to me that we'll soon need new forums here since VI is not bound to Gigastudio or EXS. It seems to me that as users branch off into other platforms such as Digital Performer, Cubase, Pro Tools, etc., so will the discussion threads benefit from branching off.

Macs and their performance are discussed here...

http://community.vsl.co.at/viewtopic.php?t=7384

Julian

Thanks for that detailed post, Julian.

I, too, am using a Mac. I work pretty much the same way you described ... all on one computer, freezing and unfreezing as I go along, making full orchestral performances with Logic. I'm not using audio, though ... just VSL and other samples.

I can attest that one (now old) dual-processor G5 with 2 Gb of RAM, and two fast 250 GB disks (using FW800, not SCSI) are sufficient to get the work done.

But that's using the OLD VSL (Pro Edition). I've asked several times on this forum for someone from VSL to at comment on Mac setup and performance regarding the new VIs. If they have replied, I have not seen it (despite having topic replies enabled all over the place).

DG has been kind enough to engage in the discussion (Thanks!) ... BUT, he does not actually use a Mac! -- I wonder how our PC-using brothers and sisters would accept technical advice from Mac users saying, "this should work, but we've never actually tried a PC"?

Julian, perhaps you and I will have to be the guinea pigs and get the real info out to everyone once we've installed and used the VIs. It would be nice to hear from VSL about their experience actually building a full orchestral rendition on a Mac system (as opposed to playing a handful of parts, à la the demo videos), if any. Absent that, however, we will simply have to forge ahead on our own. (Ah, the price of being early adopters!)

- Paul

@paulhenrysmith said:

DG has been kind enough to engage in the discussion (Thanks!) ... BUT, he does not actually use a Mac! -- I wonder how our PC-using brothers and sisters would accept technical advice from Mac users saying, "this should work, but we've never actually tried a PC"?
- Paul

Who says I've never used a Mac? Who says that Ive never actually tried a Mac? Who says that many of my friends don't use Macs as well as PCs?

I'll admit that I threw out my Mac over a year ago (and sent the new G5 back), but that doesn't mean to say that I don't check out all new models that come onto the market. If you read my posts carefully, you'll see that I never tell people how they should do anything on a Mac, only general VSL (and other computer) related advice.

I don't care who gives me advice as long as I can check it out, and verify the accuracy.

So from now on I suggest that people who are Mac users and do not want me to respond to their posts include a signature that says:
a) They use a Mac
b) They have no interest in any advice, except from Mac users

FWIW the only advice that most Mac users seem to be able to give to PC users is "buy a Mac" [8-)]

DG

Wow.

I touched a nerve of some sort. As with all of us, you should take your own advice and read MY post carefully.

I don't think your reply is appropriate to my post that:

- a) publicly thanks you for your discussion here, and
- b) truthfully points out that you do not use a mac

You mis-read or misunderstood my post to say or imply that you "never" used a Mac. I didn't say that.

I will try to clarify why I refered to your non-mac-using status: Someone earlier posted about a Mac setup asking you in particular to describe yours. You didn't reply saying, truthfully, that you don't actually use a Mac. And I don't care that you don't. Your participation in this discussion is important to me.

Surely, you must be able to relate to our concerns: We use certain hw/sw and want to know what sort of experience people with similar hardware/software (hw/sw) have had before spending a lot of money on VSL. It doesn't matter what you use ... if you find a glaring lack of real information about your PARTICULAR hw/sw, you would likely be concerned, to say the least, before plunging ahead.

My goal in this thread is to get someone (anyone!) at VSL with real, actual, hands-on experience using the new Vienna Insturments on a Mac to simply comment on that with respect to the several specific questions I and others have posed here.

To that end, I shall try to remain on topic and avoid attempting to clarify other people's postings to other people.

- Paul

No nerve, just a sense of humour [:D]

DG

One thing that applies to both Mac and PC users (I guess?) and relates to the total number of instruments that could run at any one time is the mono stereo issue.

All VSL instruments are stereo. I tend to use these in Logic in 3 ways depending on the project/arrangement.

1. As default stereos.
2. As loaded stereos but stereo spread reduced as required and panned to where I need them to be.
3. Using a mono exs instrument

I would guess that where I am using a mono EXS instrument (this is in cases where use of a stereo even reduced image will not enhance that particular instruments position/ambience in the final mix) I will effectively be able to have twice the number of voices for the same CPU load - this wouldn't affect the RAM requirements but would effect the total voices that can be reproduced in real time on one computer. - Just a thought.

On the same tack I wonder if VSL would be able to provide mono versions of their files for a mono load option (Spectrasonic have done this on a number of their sample libraries) It would at a stroke increase most peoples effective RAM capacity. My view is that in a comprehensive orchestral arrangement at least half the tracks could be represented with mono samples.

When I've done my large scale orchestral recordings (real orchestras) there have been a lot of instruments and sections on mono audio tracks to keep track count under control. At no time have they suffered from lack of realism or image control.

Julian

Hi,

we are currently finishing the Audio Unit version of the Vienna Instruments, that also includes a lot of testing. As soon as we are ready and content with the Mac Audio Unit version, there will be more detailed descriptions, test results, demos, mixes, videos...

Best, Paul