My apologies. When I said notepad, I meant to write it down like an instruction set so that we could manually set up our giga systems.

PA

dietz mon cher
remember me? I hope you are fine. And hello to the others here. Concerning panning: Do you do anything different from narrowing the stereo image of a sound for putting it left or right? I mean tools that act like waves S1.

best

Ulrich

Uli! How could I forget that crazy mixing session in Munich 8-] ... Nice to see you here!

Concerning your question: No, I do just that - I take the S1, narrow the stereo-image to an amount I like, and pan the whole signal to a position I (or a producer) think that fits the task.

In many Digital Audio Workstations with true stereo-auxiliaries this has the benefit that you signal is panned _before_ the AUX-send, which means that you don't have to take extra care for proper panning in this respect.

All the best, and I really hope you show up here from time to time.


/Dietz - Vienna Symphonic Library

PS: "wegen .... Essen ?!?" [insider joke mode OFF]

so you do use the s1? why don't you just put the left and right channel of the stereo source where you want them? Or is that what you do in s1 after all? (I mean the s1 could do things like panning in-phase contents separately in the stereo image and such, but I didn't feel that makes much sense with the vsl, do you?)

best

uli

Hello Uli,

of course you don't _need_ the S1 - it just makes things so much easier: no matter in what direction you pan the signal, the stereo-width always stays the same.

/Dietz - Vienna Symphonic Library

I was just tinkering with the Waves S1 SI and created some presets according to standard orchestral seating. I will post a link to a piece when i am done, though it won't be using VSL since I don't have it. Well I do have the demo disc atleast...lol.

EDIT: Dietz you can change the width and the distance.

with S1 you cant change the distance, you can change the spread of the signal, (or rather "shape" it), but you cannot fake distance, its only volume/power.

Another way to consider mixing that I like to use.

This of course assumes that you might want to put all your stuff in individual hard disk tracks and mix them in a hard disk environment like nuendo or your sequencer or whatever.
What I like to do is just set everything to the center and add a little bit of temporary reverb to compose. I send each section to its own pair in the GigaStudio DSP station. (each instrument\section to its own pair, ensemble and solo. That way I can have the same instruments together and mix them together. My own philosophy anyway)
So, everything is going dry to its own various pairs of channels in various DSP station pairs, accross several computers. (as many as you can get to compose in real time)

When a song is done, I can then record each stem to its own pair of audio tracks. You can capture to wave or digitally record them or even an analog recording if needed.

When I'm done, I have for example, one pair of of hard disk tracks for solo & ensemble trumpets, one for solo & ensemble horns, one for each section of the strings-solo & ensemble and so on. This includes all articulations of those instruments, so for violins, that would include all the sustain, legato, staccato,repetition, anything from any other violin library, all going to the same channels. As I compose, I make sure their relative levels are taken care of with MIDI volume or expression. So, while composing, you can do some basic level adjustments and they will be hardwired into your sequencer tracks and convienient to access real quick. Your not worrying about any reverb or pan settings so you can keep the composing flow going.

It comes out to
5 pairs of tracks for strings
4-5 pairs for brass
4-5 pairs for winds
2 or 3 or so for percussion.
In the end I have less than 40 tracks (20 stereo pairs) to work with.

They are all panned dead center at this point. Then I can mix them real simply without having to go crazing from sampler screen to sampler screen and tweak that way.

Giga Studio does give you much of what you need to do the mixing and it is there if you don't have the other options but it is not the easiest way to mix.

My templates are the GSP performances for the Giga machines and a sequencing template that pans everything to the center. It works just fine for composing and you can have a MIDI template do some panning for you in your sequencer if you need to hear the instruments placed in the right place.

This is becoming less relevant with the current libraries like VSL an QLSO that are all done in a single environment but it still works and is much simpler than when I had to match several various libraries with various panning settings. With this method, my MIDI templates could make sure that everything is panned dead center. That way, I only had to do mixing at the hard disk stage with 15 or 20 pairs of channels to mix. Its really cool.

At that point you can then apply whatever eq or reverb or impulse technology you wish and pan them.

If you have a big enough mixer and multi outs for all your systems of course you can do this all live.

The disadvantage is that you have to make sure you have a good level mix of your individual articulations of course or you will have to remix a stem or two. Keep in mind though, that is all level adjustments that are being made in MIDI. You can get a good level mix before you capture these stems pretty well.

Something to think about anyway.

Dave

Wow taking a little longer to just use S1 compared to cakewalk's panning is well worth it. Also I did what david said above (this is before he posted though) and I maxed the volume of each instrument (0db no clipping). Then I loaded em all into CW 9 and adjusted the volume a little to make it sit better and mixed it down to a single stereo wav. Finally I opened it in SF 5 and added an acoustic mirror to it and now it is done. Though one question, how would I set up GS to record when I press play in cakewalk 9? I have tried several times but it never works. So I have had to press record in GS, hit play in CW and then edit out the time difference in SF, it is very tedious and is getting annoying. Please someone help [:'(]

Good point Adam. For years Cakewalk has not had the ability to send the appropriate MIDI clock that will start the GigaStudio capture. It sends some sort of basic MIDI clock but not the kind that Giga responds too. I don't know if they have put that into their latest stuff. The other sequencers work fine. I would assume that the NemeSys programmers may work on this a bit. A big request has been for multi track capturing in Giga. For now, it might help to create 4 metronome clicks at the begining (and end if you like) of your sequences using some percussive GigaStudio samples and capture them. Then you have some slates to help synch them up.
You added another good point in that you want your stems to be pretty strong and use as many of those bits as you can. You can then turn them down when you mix.
Take care
Dave

Thanks for the tip Dave that should work. Yeah I don't really see how much programming it would require for them to make a midi clock that works with GS, maybe it could be a free download for CW users?

@David Govett said:

Another way to consider mixing that I like to use.

....

Something to think about anyway.

Dave

Very nice summary Dave, exactly the same approach as my new setup. I return the Adats from my Giga PCs into Logic 5.5, where I can easily apply S1, RVerb, some EQ on the audio input signals, so I can do some initial "better than Midi-" panning here, while I work in the Midi Dept.

Not yet having VSL, I have made this setup up especially for handling and merging dry & wet libraries, like Dan's solo brass vs SAM's horns. You can first route the dry instruments through for instance CakeWalk's SoundStage or Waves RVerb with Early Reflections only, to make the dry & wet sounds similar. You can easily run a number of S1's and/or SoundStage instances within the input mixer.

Regards,

Peter

PS: I hope that non-VSL posts are not a problem when they address the general sequencing/recording processes that can also apply to using VSL... [:)]

You're welcome Peter.

@David Govett said:

Another way to consider mixing that I like to use.

This of course assumes that you might want to put all your stuff in individual hard disk tracks and mix them in a hard disk environment like nuendo or your sequencer or whatever....
Dave

http://www.silverspike.com/PlugIns/TapeIt/tapeit.html

regards

bc

Hi all,

I am using Logic Platinum with Giga and VSL. I just set panning in Logic and save it to my auto load template. Then as I'm composing I tweek it to taste. Is this an inferior way of achieving a good simulation? It seems to work and it is very simple, but perhaps I'm missing something.

Scott

Scott,

Since I was also a music teacher for about 30 years, I do permit myself to write something I used to tell to my students when they where asking if it was OK to do things in a certain way. My answer was”Do it as you like, as long at it does sound as you want it to sound”, and do not listen too much to people how are thinking they know how things should be done, because, as Aristotle’s said before me ¨The only think I know for sure is that I do not know much”. Of course this does not mean to take notice and learn from others, but there has to be a balance of self confidence and critic. All this to express the meaning that if your system of panning sounds good, just try the other ones, and only if they sound better, to you, change. [[;)]]

Iwan

As right as Iwan is from a principal point of view, there may be _really_ a intrinsic problem with panning on stereo tracks of Logic (and similar platforms):

I may be wrong, but AFAIK, the panning on stereo-tracks is just a _levelling_ of the two tracks. IOW, the louder the left side gets, the lower in volume the right side will be. This is not the same effect that you would achiece by panning the left side to full left individually, and turning the right side to a center-position, for example: In this second case, the stereo-width would be smaller, of course, but the acoustical content of the right side is still as audible.

This is why I tend to use the S1 as pan-pot, so to speak, because I can most easily maintain a chosen stereo-width while still being able to change the actual position of the signal in the stereo-field. You could also use two mono audio-objects within Logic and go the "analogue" way i described above (... "analogue" because that's the way i work on a real console, opposed to a DAW).

HTH,

/Dietz - Vienna Symphonic Library

Interesting, but isn´t Waves S1 a bit too CPU-intensive to apply it to every instrument, in addition to a reverb?


Javier.

PS- pssst Iwan. That was Socrates [:D]

@Dietz said:

As right as Iwan is from a principal point of view, there may be _really_ a intrinsic problem with panning on stereo tracks of Logic (and similar platforms):
]

Dietz,
Of course I do agree with you, I record the MIDI without panning and when mixing, I put an S1 on every single audio track. I do not like to pan in GigaStudio at all.
But I think it is good to find the good things by hearing and not only by reading.....or by ¨Mr SO and So said, it has to be done like this" [[[;)]]]
This is not anything meant to be personal [[[;)]]]
Iwan

@Another User said:

PS- pssst Iwan. That was Socrates [:D]

Sorry about this, must have been late at nigth and it is allready a few years since I am out of school [:D]

Iwan