Vienna Symphonic Library Forum
Forum Statistics

199,039 users have contributed to 43,151 threads and 258,882 posts.

In the past 24 hours, we have 6 new thread(s), 14 new post(s) and 63 new user(s).

  1. Home
  2. Sample Libraries
  3. Vienna Instruments Libraries
  4. How can I pitch VI permanently by half a tone?
  • A
    A
    last edited
    last edited

    @DG said:

    This is a little bit dodgy using the Pitch Wheel, and chasing continuous controllers hardly ever works IMO. this is one of the reasons I prefer to use keyswitches where possible.
    DG


    I haven't done it all that much, but when I have it seems to work. What problems do you have with it? What sequencer are you using?

    Isn't the problem with keyswitches the same, in that the sequencer can't chase the 'last keyswitch' like it can controller data? That happens all the time to me, I start up in the middle of a song and the strings are playing legato when they s/b staccato cause it doesn't know what the last keyswitch was. I've been thinking about switching to use my midi controller to send patch changes instead of keyswitches for just that reason. But very interested if you have a better way, I'm still a newbie.

    Thanks,
    Andy
  • D
    D
    last edited
    last edited

    @DG said:

    This is a little bit dodgy using the Pitch Wheel, and chasing continuous controllers hardly ever works IMO. this is one of the reasons I prefer to use keyswitches where possible.
    DG


    I haven't done it all that much, but when I have it seems to work. What problems do you have with it? What sequencer are you using?

    Isn't the problem with keyswitches the same, in that the sequencer can't chase the 'last keyswitch' like it can controller data? That happens all the time to me, I start up in the middle of a song and the strings are playing legato when they s/b staccato cause it doesn't know what the last keyswitch was. I've been thinking about switching to use my midi controller to send patch changes instead of keyswitches for just that reason. But very interested if you have a better way, I'm still a newbie.

    Thanks,
    Andy
    I'm using Nuendo. Some controller data never seems to be chased, no matter what the setting, so I tend not to use continuous controllers, if I don't have to. Regarding keyswitches, that is easy. Make them legato (with a setting of around -10) and they will always make sure you are on the correct patch. It also has the advantage of being able to see at a glance what patch I am on, without looking at thousands of Controller lanes.

    DG
  • H
    H
    Doesn't the VI have a Master Tune function. You could just offest that by half a tone couldn't you. You'd have to do the same with all of the instances .. but that's how it could be done simply.

    Wouldn't bother with all this controller stuff .. just use the VI player to do it .. since it can [:D]
  • C
    C
    >Doesn't the VI have a Master Tune function

    Yes it does, but as Felix explained it shows tuning values as A=440 etc. So unless you know (or can work out) what a semitone equates to in Hertz, it's not so easy!
  • A
    A
    last edited
    last edited

    @DG said:

    ...Regarding keyswitches, that is easy. Make them legato (with a setting of around -10) and they will always make sure you are on the correct patch. It also has the advantage of being able to see at a glance what patch I am on, without looking at thousands of Controller lanes.

    DG


    Can you explain? I have no idea what you're talking about. What does 'a 'setting around -10' mean for keyswitches? Is that a VI setting?

    Thanks again.

    Andy
  • marnixM
    VSL Team
    marnixM
    Andysmi,

    To my understanding, DG referred to the Keyswitch notes being played or drawn in or copied as legato notes (Logic f.i. has a function called "note force legato (selected to selected)") and to move them for around -10 steps, so they always trigger before the actual 1 of the next beat (or wherever you want them to f.i. change the patch of a given matrix) This way, you can always see, in your sequencers matrix editor, which keyswitch is active at a particular moment in your arrangement.

    Conquer,

    A# would be 466.164Hz
    Ab would be 415.305

    I have a handy little widget in my dashboard to calculate these things - if you want to, I could send it to you by email!

    Best, Marnix
  • D
    D
    Marnix has it sort of right...! What I do is play the keyswitch at the correct time and then make it almost long enough so that it almost reaches the next one. By selecting all the keyswitches you can do this with one key command (in Nuendo and Cubase). This means that there is always a Note On command active wherever you start in your music. The -10 refers to the fact that the automatic gap that I set is 10 ticks, so that your notes are not quite legato. I hope that this clears up and confusion that I might have caused. [:O]ops:

    DG
  • A
    A
    Ah I see... using the 'legato' function of your sequencer you stretch each of the keyswitch notes until it almost hits the next one... pretty clever!

    So what's the tradeoff... you have to apply that function manually every time you lay down a part, no? I guess I could assign a macro.

    Also, each instrument has a different range for keyswitches... do you just have a different macro for each different keyswitch range?

    Thanks! I love getting these tips from the masters!

    - Andy
  • F
    F
    last edited
    last edited

    @andysmi said:

    Hi -

    Not sure what sequencer you're using, but I use Cubase SX3 and it has an option called 'Chase Controllers', and when selected it causes Cubase to set any controller(s) to the last set value, no matter where you start in the song. So even if you haven't touched the controller since the very beginning, it looks back in the track and sets the controller to whatever the last value was. So if you set pitch bend once at the beginning of a track it will be remembered from then on.

    Maybe you have a similar function in your sequencer.

    Hope this helps.

    Andy


    I´m working with Logic. But maybe there´s something wrong, cause I activated "chase pitch bend", but when I start a song after the last pitch-bend event, it is not recognized.
    To all Logicusers: Is that right? Or could I have set something wrong?



    Concerning the master-tune: Highest amount is 460 hz, but it needs to be 466,1 Hz. So unless I want my Violins to be out of tune, the master tune doesn´t work.
  • D
    D
    last edited
    last edited

    @andysmi said:


    Also, each instrument has a different range for keyswitches... do you just have a different macro for each different keyswitch range?

    - Andy

    All my instruments have the same keyswitches (starting at C-1). I use another, smaller keyboard for all the controllers and keyswitches, which have labels on them, in case I forget which one is which. [:O]ops:

    DG
  • F
    F
    At least I got the pitch wheel working now and regognizing all pitch changes, without the need to start before the last automation point.

    Seems like there is no real good solution. So this leaves the question to me, why VLS set the master tune region from 420 Hz till 460 Hz instead of 467 Hz to allow a pitch of half a tone.

    I´m still hoping for an update about this!
  • C
    C
    I guess the answer is that VSL didn't think people would need to retune the samples by as much as a semitone (perhaps because in real life orchestral instruments are rarely that far out of tune) and therefore provided a rather narrow 'fine tune' control. Personally I would like to have greater overall control of the tuning and feel it's a pity the pitch bend range is limited to one tone (200 cents).
  • F
    F
    Maybe they´ll fix that in an update?
  • PaoloTP
    PaoloTP

    On a side note: being able to master tune between A415 and A466 Hz would allow perfect matching with acoustic baroque instruments. These are the standards around which baroque ensembles have standardized. (The big organ made by Gaetano Callido in 1792, I could work on on last summer, was tuned A466, probably after a recent restoration).

    Paolo
  • M
    M

    I know you are searching for a solution in VI.
    In VIPro there is a possibility to adjust all keys (all a's, all b's flat, all b's and so on) until a semitone higher or a semitone lower (from - 100 cents until + 100 cents). So when you set all the keys a semitone lower and adjust the midi settings in the VIPro midi settings of all the slots (!) of the instrument, you get an "new" instrument. 
    In VIPro it is also possible to adjust the range of tones, so you can get the highest tone of the instrument by adjusting the range. This works fine, only it takes some time to make all the midi adjustments of the slots, depending of course of the amount of articulations.
  • bbeliusB
    bbeliusB

    I find it easier to use the Logic Editor in Cubase as midi insert. I use two instances:
    First one transposes every note above the keyswitches, and second one sends pitch-shift data whenever there is a note.

    Ben@VSL | IT & Product Specialist