Vienna Symphonic Library Forum
Forum Statistics

194,255 users have contributed to 42,914 threads and 257,943 posts.

In the past 24 hours, we have 2 new thread(s), 17 new post(s) and 89 new user(s).

  • last edited
    last edited

    @rino amato said:

    GREAT! ...after 5.2.0.0 my VI open after 5 minutes! [[[:|]]]
    No offense... but... Are you... are they (at Syncrosoft) kidding? [*-)]:
    (Please, don't say to me that "I'd not have to install the update"...)
    [8-)] ...so to speak...

    I confirm rino's 5200-statement: [[[:|]]]
    ...even if I can count only 3 minutes (~1'30" bevor > with 5.0.6.2)

    Beat

    - Tips & Tricks while using Samples of VSL.. see at: https://www.beat-kaufmann.com/vitutorials/ - Tutorial "Mixing an Orchestra": https://www.beat-kaufmann.com/mixing-an-orchestra/
  • rino, how many licenses do you have on the key where it takes 5 minutes?
    we tested startup times between not even 30 seconds and a few seconds more than one minute (windows a little less, ppc-mac a little more, but in any case the difference is seconds)
    christian

    and remember: only a CRAY can run an endless loop in just three seconds.
  • last edited
    last edited

    @cm said:

    rino, how many licenses do you have on the key where it takes 5 minutes?
    we tested startup times between not even 30 seconds and a few seconds more than one minute (windows a little less, ppc-mac a little more, but in any case the difference is seconds)
    christian

    Hallo Christian
    I'm not Rino but nevertheless...
    The cube, the soprano choir and the organ

    All the best
    Beat

    - Tips & Tricks while using Samples of VSL.. see at: https://www.beat-kaufmann.com/vitutorials/ - Tutorial "Mixing an Orchestra": https://www.beat-kaufmann.com/mixing-an-orchestra/
  • I can confirm Christian's "hot" time on a Mac G5 (OS 10.4.7) using 5.2.0.0
    I have the Cube + Saxes +Organ and VI standalone opened in 1 min plus a second or two. AU in Logic from a "cold" start after a logout was exactly the same.
    I'm very happy.....

    Regards - Colin

  • last edited
    last edited

    @cm said:

    rino, how many licenses do you have on the key where it takes 5 minutes?
    we tested startup times between not even 30 seconds and a few seconds more than one minute (windows a little less, ppc-mac a little more, but in any case the difference is seconds)
    christian

    Hi cm...
    well, I've just opened -this morning- my VI in 3' 12" (does it seems an... Olympic Game? [:D])... this is my new established time (yesterday, I had: a complet "freezed" first opening [[:|]], then the 5 min time... then -later in the evening- the new 3' 12" time...)

    ...I've "cleaned up" my System... that's, I think, brought down to 3' 13"... but, still, it's 2 minutes more then the ver. 5.0.8.4)... as Beat told too... more or less.... (thanks Beat!)

    If Colin (thanks Colin!) confirm your time, it's my Setup to slow down my 5200 (but it's the same setup of 5084!:cry[:)]... I've got 8 licenses (on one key... HEY! ...I've got another Syncrosoft key licenseing just Virtual Guitarrist 2... could be it to slow down the process...? I'll try without later...). My samples are shared on two external FW800 (laCie) 250GB... with a G5 Dual 2.0GHz - MacOS 10.4.8...

    That's it! ...it seems that Syncrosoft Operation is very sensible to our different setups... [:O]ops:

  • last edited
    last edited

    @Another User said:

    HEY! ...I've got another Syncrosoft key licenseing just Virtual Guitarrist 2... could be it to slow down the process...? I'll try without later...

    [[:|]] ...I've take out the other (Steinberg) key... NEW TIME!

    Just: 1' 05"... [:O]ops:

    [*-)]: [*-)]: [*-)]: ...suggestions...?

    (anyway... remember... the more 2, or 1 or 3, minutes... it's not the end of the world! :wink[:)]

  • i was just writing a reply regarding *we have to analize the systems in detail* when i noticed your update.
    an assumption: the *license query* scans all possible licenses _per key_, so two keys double the startup time ... sounds logical?
    christian

    and remember: only a CRAY can run an endless loop in just three seconds.
  • last edited
    last edited

    @Another User said:

    so two keys double the startup time ... sounds logical?

    [:O]ops: ...not yery much... at least, to me...

    ...you're saying that... the *license query* take 1' 05" to scan 8 VSL-licenses and 2' 05" to scan 1 VG2-license...? [*-)]: (sorry! I'm a perfect dummy on this... theme!)

    ...question: can I transfer the VG2 license on the VSL key? Any... "warning"? (first of all, shall I have benefit from that?)

    Thanks! [:D]

  • my consideration was that possibly the number of all possible licenses are scanned on a *per key* basis, so going through the process twice (without finding any further licenses of course)

    you can move licenses between syncrosoft USB protection devices - but please make sure the destination device is a fairly new one - older keys only have limited space to store licenses
    christian

    and remember: only a CRAY can run an endless loop in just three seconds.
  • Thanks cm... I'll do it!

    My key is from "yours"... so, I think, it is "fairly new"... isn't it?
    (please... how many licenses can it contains...? How can I know how much free space I've got on a key...?)

    Cheers.
    R

  • last edited
    last edited
    [8-)] ...maybe I can't do that...

    From the License Control Center's Help:

    @Another User said:

    The wizard "License Transfer" can only be viewed when the ability to transfer a license between protection devices has been released by the respective software producer.

    ...so, I can't transfer a Steinberg license on a VSL key... is it (my translation) right? [:'(]

    (Sorry about the OT...)

  • uhhh - that was new to me ... i have moved cubase and vienna instruments licenses without a problem in the past and didn't even think one could deny such a *consolidation* ...
    christian

    and remember: only a CRAY can run an endless loop in just three seconds.
  • Done it! [[[[[:D]]]]] [[[[[:D]]]]] [[[[[:D]]]]]

    [:O]ops: Uhu??!?? ...my translation was right, then?!?!?? ...but... it has worked for me too!
    Now my VG2 license is on the VSL key... and VG2 works fine... and the VI takes just 1' 03" to open!!! [[[[[:D]]]]]

    Who knows? ...anyway... ...happy ending! [[[[[:D]]]]]

    Beat... Happy MAC-world again! [[;)]]

    Thanks cm...

  • last edited
    last edited

    @cm said:

    ...you can move licenses between syncrosoft USB protection devices ...
    christian

    Licence Reading Improvements

    Bevore:
    Synchrosoft 5.2.0.0,
    4 Synchrosoft licence keys + 1 Ilockkey on 1 PCI-USB-Card
    Startup time for a VST-instance ~ 3' (first time) in Cubase SX3
    Startup time for a VST-instance 1' 15" (2nd, 3rd.. time)


    Action 1:
    I've transfered all the licences to
    - 1 VSL-key and
    - 1 Steinberg-Key (Cubase, WaveLab, Hypersonic2, The Grand2, Tonwheel Organ)
    New startup time for a VST-instance 2'40" (first time)
    New startup time for a VST-instance 1'10" (2nd, 3rd.. time)


    Action 2:
    Switched off Internet Security (G-Data)
    New startup time for a VST-instance 1'07" (first time)
    New startup time for a VST-instance 0'05" (2nd, 3rd.. time)


    In any upper case:
    Time for loading an additional instance: Within 1 - 2 seconds.

    I'm still not down on 35" but I'm again a happy Windows user [[;)]]

    Beat

    - Tips & Tricks while using Samples of VSL.. see at: https://www.beat-kaufmann.com/vitutorials/ - Tutorial "Mixing an Orchestra": https://www.beat-kaufmann.com/mixing-an-orchestra/
  • Beat-- what is "G-data" and how do I switch it off?

    Thanks,
    Jay

  • last edited
    last edited

    @JBacal said:

    Beat-- what is "G-data" and how do I switch it off?

    Thanks,
    Jay

    G-Data is an Internet Security Suite Program (AntiVirus, Spam-filter, Firewall etc.) like McAfee or Northon and...
    G-Data is a German-product which perhaps is unknown outside Europe.

    Nice weekend!
    Beat

    - Tips & Tricks while using Samples of VSL.. see at: https://www.beat-kaufmann.com/vitutorials/ - Tutorial "Mixing an Orchestra": https://www.beat-kaufmann.com/mixing-an-orchestra/
  • beat, you could try to configure G-Data (which i also do not know unfortunately) to _not_ scan TCP-calls to localhost (this should be the default setting for any firewall) and possibly exclude all sound-data files (or the location where they reside) from beeing scanned during file-access.
    christian

    and remember: only a CRAY can run an endless loop in just three seconds.
  • last edited
    last edited

    @cm said:

    beat, you could try to configure G-Data (which i also do not know unfortunately) to _not_ scan TCP-calls to localhost (this should be the default setting for any firewall) and possibly exclude all sound-data files (or the location where they reside) from beeing scanned during file-access.
    christian

    Christian
    Gibt es eine Zeit, wo Du nicht arbeitest? Es ist Samstag Abend - Zeit für den Ausgang!!!
    Thanks anyway for the information. I'm going to try your proposal. I also have the possibiity to switch off the "Wächter" of G-Data for some minutes with the "security suite" itself...

    Nice Ausgang! [[;)]]
    Beat

    - Tips & Tricks while using Samples of VSL.. see at: https://www.beat-kaufmann.com/vitutorials/ - Tutorial "Mixing an Orchestra": https://www.beat-kaufmann.com/mixing-an-orchestra/
  • I've encountered licenses that won't allow themselves to be transfered to other dongles. Apparently it's a feature.

    Quite honesty I've found that the VSL/Syncrosoft system works absolutely fine on a consistent basis (long first scan issues notwithstanding). But that hasn't at all been my experience with every Syncrosoft-protected program. I have a couple of Steinberg or Steinberg OEM programs that either run intermittently or that simply refuse to run on my G5. Cubase 3 will not work. Period. The Scarbee Rhodes and Imperial Drums both work fine on one of my Windows machines, but only about 50% of the time on my main G5 - with the same dongle. I've been over this with Syncrosoft at great length; the fellow I corresponded with is very nice and helpful, but we weren't able to get this working properly.

    And most Syncrosoft-protected instruments will crash the host violently if the dongle isn't attached and you try to insert them.

    Being a journalist I try to tread carefully where peoples' livelihoods are concerned, so I'll leave it at this: there's still a lot of work that needs to be done to make this situation tenable. I happen to know of a developer who was forced to return a couple of customers' purchases because of dongle issues. That's just nuts.

    Off the top of my head, VSL is probably the most expensive piece of music software on the planet - with good reason - so waiting a couple of minutes to launch it isn't unreasonable; clearly, they need to protect their investment. But that isn't the case with a $300 library.

    Edit: to be clear, I have something like nine Syncrosoft dongles (yeah, I need to consolidate), and most of the programs work fine. It's the ones that don't work that cause the shouting, of course.

  • last edited
    last edited

    @Another User said:

    Es ist Samstag Abend - Zeit für den Ausgang!!!
    ich war ohnehin gestern ein bisschen streunen und forum lesen ist mehr entspannung als arbeit [;)]

    usually we do not recommend to have a firewall or anti-virus application on a music machine at all, but certain setups might request to have them.
    in such a case i'd consider to use the windows XP SP2 firewall for best performance and least trouble and excluding sample data from beeing scanned.
    christian

    and remember: only a CRAY can run an endless loop in just three seconds.