@hetoreyn said:

Thanks all. Very good comments.

In the meantime I've learned some handy things about mixing. Hence how I came up with my mixing chart which gives a clear idea of what I've been let in on recently.

Compression for an orchestra is just a total waste of time. But the Logic Ad Limiter is fast becoming my favourite plug. That thing just kicks ass. ...

Hi Hetoreyn
Nice to meet you here! [:D]
I've bought Voxengo's Limiter Elefant2 these days.
http://www.voxengo.com/product/elephant/
I can't detect any change colour of the sound even if the elefant has to
limit the signal 6dBs or more. Fantastic! But I agree Logic's AD-Limiter was
my favorite too.
[:'(] "was" [:'(] (Windows user) But I remember that the
AD-Limiter brightened the sound a bit.

Kjaerhus Audio sells a new Mastering Limiter
http://www.kjaerhusaudio.com/mpl-1.php
That is not very spectacularly. But they show us the new product with
a test:
http://www.kjaerhusaudio.com/mp3/limitertest.mp3
Perhaps you can do this test with the AD-Limiter too.
In any case, I will check out my Elefant [:D]

All the best
Beat

BTW
I have not answered your question about VI-music on your home page.
Sorry. > Nothing against you > I hope you know that > I'm always a little overworked > I will have a look at the mail of that time...

Hey Beat [:D]

No probs about the VI stuff, but If you can let me know that'd be great.

I haven't noticed any colour difference in the Logic Pro 7 Ad Limiter, perhaps they managed to sort that out, or perhaps I just plain haven't noticed [:P]. But thanks for pointing that pulg out to me Beat as it has made things much easier.

Looking back at how I used to apply Post prod. plugs I'm amazed I ever thought to do these things. As they were totally wrong and in the wrong order ... but at least I learned.

Anyways, catch you all soon.

I was a big fan of Logic's AdLimiter as well, Het... but then I discovered Waves L2 Maximizer and now that has replaced my AdLimiter addiction! I think it's just a little smarter. The Waves Mastering edition is cheaper than the other WAVES bundles, but still cost me around $600US, but it's worth it every time I use the L2. But if you don't want to shell out the $$, Logic's AdLimiter is a great plugin.

Now, if only I could understand EQ....

@hetoreyn said:

Hey Beat [:D]
I haven't noticed any colour difference in the Logic Pro 7 Ad Limiter, perhaps they managed to sort that out, or perhaps I just plain haven't noticed ...

I tested some limiters > The Logic 5.5. AD-Limiter too...
Go to
http://community.vsl.co.at/viewtopic.php?t=8512&iframe=true

Beat Kaufmann

@magates said:

my suggestion bounce the mix
then master the dynamics and eq

and you can master the dynamics by hand if needed shaping with dynamic contours rather than using an automatic compressor.

If you do it that way, a good way to improve is when you bounce/render two mixes. One all dry, and one all room/reverbs only. Then you master the dynamics of the dry one only and montage it with the wet only together again. This way you avoid the undesired effect that reverb is compressed up while mastering.

Alternatively you can put a L1/L2/L3 + the mastering EQ on the master fader, either to preview the later mastering, or to make the final master right in Logic. With this method you also can mix the reverb already at the desired level.

However when the master has to be loud above the natural dynamics, i simply put in a limiter who prevents going over. This because the limiter just stops the signal shortly before zero, as opposed with a compressor who crunches the signal first direction equal loudness and raises the level with the gain. Meaning you get a slightly better result with a limiter.

In logic there is a unique process called "Energizer" where you can raise the level again without the artifacts of compressing. However, used on the master, it still would bring details to the foreground you may don't want, so apply this process on the dry signal only.

If your limiter doesn't stop the data from going over, he is not working properly.

.

Plug ins, compressions, effects... are all very nice but lets not forget the most important plug in: YOUR EARS, the better my ears has become over the years the better my mixes has become and independently of the effects used which turns out a bonus enhancement sound rather than a miracle sound.

So is it true that compression should be done before the reverb is added?

@Angelo Clematide said:

[[...] If your limiter doesn't stop the data from going over, he is not working properly.

.

This is a common misunderstanding, Angelo. What you are referring to are the so-called "brick-wall"-limiters, keeping _any_ signal from going over a certain volume (disregarding any unpleasant side-effects). Of course there are many other limiters - especially from the analogue aera - that weren't designed that way. Their main difference from "compressors" was the (much higher) compression-ratio; still they can have a certain attack-time before the limiting kicks in, thus allowing sharp first transients go above the limit (pun intended).

These limiters have their niche for single signals which have to stay in a certain dynamic range for any reason; the "brick-wall"-variety is mostly used in the summing bus of a mixdown, assuring a technically "clean" output without overloads.

HTH,

@violinnoel said:

So is it true that compression should be done before the reverb is added?

If you're talking about a common "Aux-Send"-scenario, yes. If you mean bus-compression (or -limiting) - no.

Sorry to slighty veer off-topic...but what of those who do not have Logic? I use Gigastudio, and at the moment, Goldwave for post-mixing, which is definetly not the best if you've ever used it. Any recommendations?

Also, does anyone know of a good website where I can learn what I'm doing with all this compression, EQ, limiting, etc. etc.?

Thanks,
Steve

Sometimes I find that using compression on the reverb return helps enormously with stopping the mix getting too cavernous when loud, but allowing the quieter passages not to sound too dry.

DG

@Dietz said:

This is a common misunderstanding, Angelo. What you are referring to are the so-called "brick-wall"-limiters...

Of course i meant this type of limiter, haven't used any other since techno came along. Very simple mix scenario, 100% kick. unmute the rest, and brickwall.

[:)]

@Omega said:

...Also, does anyone know of a good website where I can learn what I'm doing with all this compression, EQ, limiting, etc. etc.?
Thanks,
Steve

Hi Steve
1. Use a search engine like google to get any information about this theme.
2. Another way is to search for books. Example: http://www.musicianuniversity.com/courses/mastering_guide.html
3. I'm just preparing a tutorial about those effects. But I think it will not be finished befor July.
4. Perhaps you will get some useful tips here:
http://www.beat-kaufmann.com/tipspcmusic/vslacoustics/index.php#53248296fe1176a0e ...and the following points.

All the best
Beat Kaufmann

Hey Beat,

Thanks for the link. This should help a lot [:)].

Steve