Vienna Symphonic Library Forum
Forum Statistics

194,412 users have contributed to 42,920 threads and 257,965 posts.

In the past 24 hours, we have 4 new thread(s), 10 new post(s) and 81 new user(s).

  1. Home
  2. Sample Libraries
  3. Synchron Series
  4. Synchron Player SSD/RAID Strategy
  • kubrickK
    kubrickK

    Hello!

    I would like to build an NAS in order  to drive my whole VSL samples collections including synchron versions via ethernet on an Mac Pro Mid-2010 (Mojave and Logic).

    My question is quiet simple: is il better to use separate SSD's drives on each bays of the MacPro or using  an NAS for best results ? (Excuse my French)

    Regards.

    Rémi Sanchez.

    Happy user of VSL!
  • J
    J

    Rémi,

    In most cases, directly connected SSD drives to your onboard SATA controller will give you better results than a NAS. There are a few exceptions. 

    I've done some tests with NAS configurations, with varying levels of success, and I feel like it takes alot of effort to make it work right. You have to optimize the network so you don't introduce additional layers of latency through Ethernet. 1 Gbps NIC's could actually be a bottleneck depending on your drive/controller speeds. You also have to make sure that the NAS is robust and has good onboard SATA controllers, which you will probably get only if you buy something high-end or really have some skill building server-grade components.

    Beware of cheap NAS devices. Most of it is junk. The disk controllers on the MacPro will almost always smoke external devices unless you really put effort into sourcing the right hardware. 

    Regards,
    Jason Todd Shannon
  • kubrickK
    kubrickK

    Many Thanks Jason!

    "directly connected SSD drives to your onboard SATA controller will give you better results"

    Happy user of VSL!
  • C
    C
    Hello Jason. This thread is quite old, but I would like to know if there are news related to this topic or more tests comparing SSD RAID configurations with independent SSD drives performances. I recently purchased 4 NVMe SSDs for my iMac that are in an external Thunderbolt 3 enclosure (Netstor NA622TB3). My idea would be to use all 4 disks to create a single RAID 0 volume for orchestral libraries (Spitfire, East West, Vienna, Kontakt). I know that configuring a RAID 0 with the 4 NVMe disks would improve reading speed, especially when loading large DAW projects (I’m using Logic Pro X) with many instrumental tracks (more than 400). But I do not know if it could cause any problem when reproducing the project, since the Raid would be created by software (MacOS) and I do not know if that could significantly consume processor resources when reading/playing a large amount of samples. I’m not worried about security or drive failures, since I have another mechanical 8TB hard drive that I use as a backup of all my libraries. I’ve read in many forums that users don’t recommend Raid configurations with SSD drives for music production/libraries. They argue that it is not necessary to create a RAID volume with SSD drives, since SSDs are very fast in themselves (in fact, NVMe are even faster). It’s also known that the access speed to the disk is more important than the reading rate for our musical purposes. But I don't know if this is still the case or something has changed in the recent years. Curiously, all NVMe external Thunderbolt enclosures that I have seen are designed precisely to configure Raid systems. One of the purposes because I would like to have all the libraries in the same RAID volume, beyond the performance, is because it allows me to have everything in a single volume and it’s more easy to configure all the software and also for easier cloning the drive for backup. On the other hand, if the most advisable thing is to have the 4 NVMe drives independently, even losing approximately 50% of the reading speed, the backup system should also change and I could not simply clone a single volume. So, is there any news about this? Thanks a lot.
  • J
    J

    Hi ChoPraTS,

    There are so many variables involved, it is difficult to say which is the best configuration. When it comes to RAID, the quality of the controller plays a large role in performance. You will also want to consider the fact that test/benchmark results will almost always show much better performance than you will actually see in real-world practice. With that said, I think you need to test for yourself on your own system. I wouldn't look at forum comments as universally credible/applicable across all users. Everyone has different hardware, software and use cases. I suspect that most forum users "not recommending RAID" have to do with the difficulty of configuration and the risk of data corruption, particularly with RAID0. 

    I recently upgraded from multiple SATA III drives to multiple NVMe drives. I tried both a RAID0 and a non-RAID configuration. In my particular case I did not see a real-world performance difference, so I settled on an independent, non-RAID configuration. I found the non-RAID NVMe configuration to be a huge performance upgrade compared to my RAID0 SATAIII configuration.

    Lastly, if you are going to experiment with RAID, I can't recommend enough that you find a good controller. Intel RAID controllers are generally pretty solid. I've personally experienced too much failure from software RAID and cheap controllers to trust anything but a great controller (Intel, High Point, etc.). 

    Please share what you learn. 

    Regards,
    Jason Todd Shannon
  • V
    V

    I have been using two Highpoint 7101-a1 devices plugged into two PCIe-x16 slots on my X299 motherboard. Each of the Highpoints contain four NVME 1 TB SSDs, and all eight SSDs are configured into a single 8TB RAID 0 array.

    I use this for all my audio files. I can't easily provide ocmparisons with other systems, but I can say that the performance is transparently fast, and the Highpoint drivers and controllers seem to be flawless.

    Not affiliated with Highpoint in any way.
  • J
    J

    Hi all,

    I've been setting up a 4x2 TO NVME OWC TB3 drive Raid0.

    I'm using the MacOS utility for RAID and must admit I'm not happy with it. The sound is chunky and I get better results with my ICYBOX and 2x2 To Samsung drives using hardware RAID0 provided by the Icebox itself.

    This despite speed tests that give better performance to my NVME setup.

    BMD Speedtest :

    NVME = 2425 MB/s Read (RAID 0 seems not to be better than with no RAID at all) but chunky sound

    Icybox : 418 MB/sec Read

    MBP Internal : 

    In Synchron player, I get quite different results...

    Internal : 269,5 (3072 preload)

    NVME : 364,5 (3072 preload) >>>Should be good but it's chunkier than Icy box

    Icy box : 152 (3072 preload)

    Should I get back to No-Raid on NVME ?

    Advices welcome :-)

    JL

    Image
  • J
    J

    Hi JL. Can you elaborate more on what you mean by a "chunky sound"? Are you hearing dropouts from the samples? Are you seeing any errors from the disk performance monitor? I'd also suggest monitoring all of your CPU cores to make sure that the software RAID isn't having an adverse effect on processing. 
  • J
    J

    Hi Jason,

    Thanks for your quick response.

    Yes, dropouts in sample playback seems to be the right word. It's like samples struggling to load from that disk, which is supposedly my fastest drive. I see spikes in the CPU monitor in Synchron Player each time I play a new note. It's like if my buffer what set too low, or a little similar to what happens when an unloaded cell is loaded upon midi triggering. I tried to push up the buffer a little, changes nothing.

    I'm wondering why I have a good bandwidth and poor performance. This problem even occurs on smaller Synched libraries on my NVME, but doesn't not exist when streaming form my "normal" SSD.

    After a while, playback gets "normal". It's like loading samples one at a time, every time I play a new note, and apparently, even the same note with different velocities can make a CPU spike.

    Thanks for your help :-)
  • J
    J

     

    JL,

    If you are using an external enclosure, do you have a way of monitoring temps to make sure that they aren't getting too hot? Have you disabled power saving on those drives? I'd also double check all of the Thunderbolt devices, cables and drivers as these have given me all kinds of trouble both in WIN/MAC, but particularly on Hackintosh.
  • J
    J
    last edited
    last edited

    Hi Jason,

    The enclosure has a fan and everything seems to be cold on that side. But I don't have a proper monitoring software to check it out for sure. I'll be checking on OWC site.

    Cables are new and supplied with the box, and plugged directly TB3 on the Mac. 

    The only thing remaining would be a bad strategy for assembling my 4 NVME drives into a single 8TO volume. Not much details in the Mac's disk utility.

    @Jason T. Shannon said:

     

    JL,

    If you are using an external enclosure, do you have a way of monitoring temps to make sure that they aren't getting too hot? Have you disabled power saving on those drives? I'd also double check all of the Thunderbolt devices, cables and drivers as these have given me all kinds of trouble both in WIN/MAC, but particularly on Hackintosh.