196,146 users have contributed to 43,014 threads and 258,392 posts.
In the past 24 hours, we have 0 new thread(s), 6 new post(s) and 169 new user(s).
EDIT 2021-10-30: I remade it with the Synchron (were available) and Synchronized libraries.
---------
Hi,
I've completed my rendering of Holst's Mercury. All made with the old, trusty VI libraries (including some Dimension guests), spatialized with MIR.
The most interesting part may be that I didn't make it in Logic or another sequencer – but in Dorico. All notes shown in the page, as in the old days!
Paolo
(EDIT: Updated on 2020-11-23)
Paolo, that is so good! I loved it. It actually reminded me of how even this lighter movement of the suite is so evocative and atmospheric. The Planets is a PAIN to do with MIDI - I know from personal experience because the orchestra is so big. I did Mars and Neptune and they were hard!!! So I understand how much you had to deal with. It is beautifully done. I felt there should be more dry signal mixed in overall - like just a simple overall increase in the dry hall. It seemed like a bit too much wet but that is easily changed. I thought I heard a wrong note at around :53 - was there one? Maybe it was just some artifact. The solo woodwinds around 1:50 could maybe be a little more upfront and louder as they got a little buried by the accompaniment and that long flute sustain could taper off instead of just hold.
But those are tiny changes - it is amazingly good, and it should be put on VSL site along with the other Planets. If someone could do Saturn and Uranus there would now be a complete VSL Planets!
Paolo, that is so good!
William, thank you very much for you analytical listening, and for the nice words! I loved your Mars and Neptune (this latter literally dripping water!), and I'm flattened to see my little Mercury compared to them!
This score is so colorful, that all the hard work needed to make it sound credible in a virtual space is well repaid by how much one can learn by going deep into its finer details. It's a precious score, up to the way accidentals and dynamic marks are placed. Say Arts & Crafts!
I've done the changes you suggested. First, a bit less reverb (+15% of the perfect balance, instead of 20%; not much, but with the current trend toward more reverb, I admit I'm starting to like more reverb!).
Then, I increased the dynamic level of the woodwinds in the loudest passage around 1:50 (both going from ff to fff, and pushing up CC11 a bit). I'm not totally sure this really works, or if I would be better lower the background chord notes a bit instead. Maybe with everything so loud, they are just struggling to find space.
I increased the fading-out of the flutes before the reprise at about 2:05. I've also increased the volume of the harps in the last chord, since I wanted it to sound more metallic. In other words: more sci-fi!
I couldn't however find the wrong note at 0:53. I suspect there is something odd in the way the marked articulation sounds more or less at that point. It's not the perfect choice, but at the moment I don't have a better solution.
Maybe you want to give it another listen, if you have some time?
Incidentally, I was thinking to make Saturn, since I want to explore its somber and transparent colors. It nobody else wants to do it, I'll do. (Oh, well, I'll do it in any case!).
Paolo
(Here is the older version, for comparison purposes: Holst - Mercury (old) 😉
Hi Paolo, yes, I didn't hear that seeming wrong note either. It must have been an artifact. This sounds great. I was thinking you could go even drier on the overall sound but it already sounds as good as many orchestral recordings. It almost depends on what you want to emphasize. Clarity or space. Not that I am an expert - I struggle with that.
Anyway, this is fabulous and should be in the Planets of VSL! I am really impressed with what you've done.
now - if only someone will do Saturn and Uranus! (Or two people - easily quite enough for either...)
Paulo, very well done, excellent work! I've always loved the Planet Suite and wore out my vinyl album listening to it endlessly as a young lad. You've captured Holst's pace and lightning-fast changes of ideas and feelings in Mercury.
I agree with William: I can imagine this eventually in VSL's music showcase. And I believe it may well happen once you're happy that you've ironed out the various midistration and mixing impedimenta - of which I feel there are still a few worth addressing. I'd suggest you take your time with it; I'm sure you already know that giving it a break while working on something else can sometimes work wonders when you get back to it with a refreshed perspective.
Up front for me in the few current impedimenta is spatialisation and reverb. The reverb you've added seems a little too cramped in size and width, which is emphasised at the wetness you've given it. I don't have MIR, so you describing what you've done with it probably wouldn't mean much to me.
I agree with you and think this piece can carry some big, wide, opulent reverb, such as in this fantastic real-life example I've linked below, performed by the UK NYO at the Royal Albert Hall in London. Holst worked within walking distance of the RAH and no doubt knew it very well. (No need to be daunted by the huge size of the NYO; I've attended a performance of the Planet Suite at the RAH given by a much smaller orchestra and it was truly superb. The Suite's orchestration is scalable).
The Albert Hall is different to most concert halls in that the stage is almost in-the-round, such that early acoustic reflections of the stage zone aren't so significant. Hence using Synchron Stage (or Teldex or any other scoring stage reverb) coupled together with a big hall reverb can't really emulate the RAH sound. Also the RAH's main auditorium acoustic reflections are somewhat unique in that they don't decay in the same way as in rectangular concert halls. If you fancy the RAH acoustics but don't have its Impulse Response file to plug into a convolution reverb, I can only suggest trial and error using the large-hall reverbs you have, making sure that Early Reflections aren't too prominent.
Your panning appears very good, but overall spatialisation might be enhanced if you use a few reverb plugins, all of the same space but each panned slightly differently, and send different instrument sections to each reverb, roughly matching up stage position with reverb plugin panning.
Also, I'm a bit worried about what seems to be a distracting degree of masking at various moments. But perhaps we can take that up a bit later when I've had time to listen closely and identify times at which it happens.
This sounds great. I was thinking you could go even drier on the overall sound but it already sounds as good as many orchestral recordings. It almost depends on what you want to emphasize. Clarity or space.
William, thank you very much for this further listening! Yes, there are tradeoffs, and as you see, you, Macker and myself have different preferences for reverb! How can I find a three-sided coin to let the chance decide? 😊
As for the busy louder part, I see that this also happens in real recordings. More: timpani should also be louder! Holst really wanted the maximum noise for this passage!
As for Saturn: I have the score open in front of me!
Paolo
Paulo, very well done, excellent work! I've always loved the Planet Suite and wore out my vinyl album listening to it endlessly as a young lad. You've captured Holst's pace and lightning-fast changes of ideas and feelings in Mercury.
Macker, and thank you as well for lending me your ears!
As for spatialization, as you see there are very contrasting opinions. From a philological point of view, you are probably right in saying that Holst was thinking to more space, more reverb. I think that this sometimes can be perceived (in Mercury: the resounding plucks and mallets, the violins's harmonics asking for space in which to swim).
The beauty of MIR is that it is relatively easy to adapt a piece to a different space. I wonder how it works, more than in the Synchron Stage, in the big church of the Steinhoff. I'll try soon!
As for the masking effect of some passages, I'm trying to understand if this can be avoided, and how. I'm listening to as many versions as I can, where possible at the best quality (my CD collection only has one version of it, and YT is not always the clearest way). It seems that masking is unavoidable even in a real space and with real instruments.
But, as you say, I need fresh ears.
Paolo
I agree with you and think this piece can carry some big, wide, opulent reverb, such as in this fantastic real-life example I've linked below, performed by the UK NYO at the Royal Albert Hall in London. Holst worked within walking distance of the RAH and no doubt knew it very well.
By the way, I think this is one of the best performances I could hear of the suite. Young professional orchestras are often really surprising!
Paolo
Paulo, there probably isn't really much contradiction if any at all in our views on reverb for your piece. Honestly, my very first intuitive impression on first listening was something like, "oh dear, no, that reverb really is not helping; it needs to be turned way down." And if I'm not mistaken, I'd guess William's impression wasn't a million miles apart from mine (though of course diplomatic platitudes tend to take precedence in these cases, so as to avoid disparaging the poor exhausted soul who's just poured his life-blood into the production!) I mentioned my worry about your reverb but then, to be constructive, leaped ahead and tried to imagine what a different, wider, bigger, more suitable reverb could do for the piece you've produced.
From what I've heard of reverbs in many works posted here, there does seem to be a rather widespread misunderstanding about scoring-stage reverb. As I've tried to make clear in another post, the sound of any scoring stage is in effect similar to that of a theatre stage or concert hall stage, waiting for the sound of an auditorium to be artificially added - or indeed physically added, as in the case of large cinemas. Trying to push a scoring stage reverb into providing strong overall reverb tends to end up giving the dreaded 'tin can' effect. Remember, architects, builders and acoustics engineers have sweated blood in ensuring that scoring stages assert their acoustic character just enough and certainly not too strongly, knowing that main-space reverb is to come from elsewhere.
Acoustically the stage and auditorium are very different; generally they need each other and usually work naturally and beautifully together - given appropriate balance. However, there are exceptions, the Royal Albert Hall being a prime example. In emulating a concert venue similar to the RAH, adding any significant amount of stage reverb can destroy the open-stage character of its overall acoustic signature - and that's where VSL VI library users have a distinct advantage.
Well, I was trying to be a bit broader than that, Paulo, not knowing what your actual reverb arrangements were (I didn't want to pry) but hoping to equip you with a basis for more options from which you could choose.
But ok, you've been using a "(relatively) small recording stage" reverb? Then yes, I suggest dialling it back substantially and using it only to provide just enough stage-type character as a precursor to a main-space reverb. When I say "precursor", that would mean feeding the stage-reverb audio into the main-space reverb, but parallel routing might also work very well. That's pretty much a general approach to reverb technique.
That is unless you want to go for a full-on RAH type of space. In that case you might find it's better to do without a separate stage-reverb precursor and just use a large-space reverb, assuming it has enough early reflections of its own to bestow some relatively intimate acoustic context on the totally dry VI library samples.
Applying reverb is one of those skills that takes a fair bit of time and practice to get good results. The struggle in learning it is unavoidable but in the long run gives tremendous benefits - by putting you in the driver's seat.
Hi Macker,
MIR is a bit different than a traditional reverb. I fear the way of using it has to follow a different approach. An easier one, probably, since there is a single stage to care about.
I don't know if the technique you are describing is the same I had been using before switching to MIR. What I did was to create some layers of early-reflections, to create the illusion of close, middle, and far groups of instruments. Instruments were bussed to these layers, to give an approximate idea of distance from the listener and the back wall. Maybe this is the equivalent of what you call stage-reverb. Then, everything was sent to the main reverb halo, that may be what you describe as the main-space reverb.
With MIR you deal with a virtual space, where each instrument is sent to its final position. From there, MIR creates all the components of the reverb, giving an idea of position on stage and enveloping the instrument with the reverb's halo. What you can do is to set the length of the reverb (as if you were actioning absorbers), mix the dry and wet signals (as if you were mixing the spot and the room mics), add a second set of microphones (for surround), and equalize the instrument's and room sound.
The main character of the reverb is therefore due to the chosen room. In my case I've chosen the Teldex, the classic recording studio very often used to record classical music. It's an average-sized stage, with a very transparent sound. Not exactly the huge space that is the RAH, or a bigger film scoring like the Sony/MGM or the Synchron.
So, if I want a lusher reverb, I guess the best option is to select a different room, with a lusher sound. I'm trying now with the Steinhofkirche, a huge building modeled after Hagia Sophia, with 8 seconds of reverb. I've lowered it to 3 seconds, to make it more similar to the RAH. Different spaces, but maybe they can be in a similar class of reverberant spaces.
Paolo
Good hunting Paolo!
My professional background is design engineering, which is probably why I tend to avoid 'big black box solutions' that offer instant results by pushing a few buttons. So I can't see me buying MIR any time soon - and that's certainly not to degrade its usefulness and convenience for others.
I've further reduced the wet signal in the Teldex version.
Just for fun, I've also done a version in the Steinhofkirche, with the reverb time reduced to about 3s (similar to the Royal Albert Hall). The sound is totally different from the Londoner hall, and is of a more "impalpable" quality.
Holst - Mercury (Steinhofkirche)
Paolo
Both versions now have a night-and-day difference to the original. Much improved. Good going Paolo!
But ... (well you just know I have more to say, lol) ...... ready?
Teldex
In your latest Teldex version I'm still hearing what is for me a somewhat irksome, strong, definite and unnecessary confinement of 3D acoustic space. The sound (to my ear) too obviously highlights the walls and ceiling of Teldex and nothing beyond. This has almost nothing to do with the reverberation time (RT60) of Teldex and everything to do with how the ear perceives 3D space. It doesn't matter if a sound bounces back and forth between two walls 5 metres apart for 1 second or for 10 seconds, our ears still get the same intuitive sense of how far apart the walls are.
On its own, MIR's Teldex convolution reverb truthfully informs our ears: "there's no escape past the Teldex walls and ceiling". Synchron Stage would sound a bit larger but would still faithfully let us know we're in a confined space much smaller than a typical concert auditorium. (Btw no, I'm not a claustrophobic, lol.)
BUT .... I've just tried out a very simple 'Band-Aid' fix. I've added to your latest Teldex mix a small amount of convolution reverb of the RAH. Now the Teldex confinement, although still there, is no longer so annoyingly pre-eminent and final. (This RAH reverb is in the venerable old Waves IR1 plugin, named coyly as "The Big Hall" - perhaps because using "Royal Albert" in product names is not permitted in the UK market.)
The RT60 of this RAH reverb is only 2.2 seconds and yet the sound clearly reaches out in 3D space well beyond the confines of any scoring stage. However, adding this RAH reverb can't completely moderate or mediate the very forceful imprint of Teldex in your mix.
Therefore I'd suggest (and now I'm hearing groans from poor Paulo!) a more ideal mix would have even less Teldex, but would include some large-hall reverb, added perhaps to the master bus (or even to a print as I've just done), such that the sound can stretch out beyond Teldex confinement - and without incurring a big RT60 penalty.
From what you said earlier, I must say I'm very puzzled as to why MIR doesn't seem amenable to the perfectly proper practice of treating scoring stage reverb as no more than a component of overall reverb.
Kirche am Steinhof
This is a very strange mix, yet not without its appeal. My first reaction was that orchestral works typically don't really suit such huge and highly reverberant spaces. But then I remembered a performance of the famously beautiful Tallis Fantasia by Vaughan Williams (which is said to have been an influence in Holst's Planet Suite), recorded in Gloucester Cathedral, England. Here it is for comparison (also hoping Dietz might appreciate this):
I'd say Mercury is way too fast-paced and dynamic for the large and stately Kirche am Steinhof, despite the amplitude envelope being reduced to 3 seconds. But at least stage-confinement is gone. And as you say, it's for fun.
BTW, I'm wondering what's up with the Celesta part. In some places it seem almost to disappear and the pitches are strange, as if it's played an octave or a 5th higher, or something. It certainly doesn't sound like the Celesta part in the Prom performance - which is what I've been accustomed to forever.
BTW, I'm wondering what's up with the Celesta part. In some places it seem almost to disappear and the pitches are strange, as if it's played an octave or a 5th higher, or something.
Does this also happen in the Teldex version? I'll check it again against the score.
What you suggest about the reverb is to make it more artificial than using a convolution reverb. I'm not convinced of this solution, but I’ll do an experiment in shortening the reverb time in MIR, and increasing the importance of the artificial reverb I use only for smoothening.
While artificial reverbs tend to sound good, I find them generally less convincing than MIR. A compromise could be making the presence of the smoothening artificial reverb stronger, but then again it will sound as an artificial reverb and not a spatialization. It's in any case one of the possible techniques to be explored.
Paolo
Celesta part issues are the same in both versions. Worst case is at 1:18 when the Celesta should easily be heard above the quiet Harp ostinato but seems totally absent. Another case is at 0:28 when Celesta should be there but there seems to be something very high-pitched instead, perhaps the Glock. Is the Celesta there at all, and is it perhaps just the Glock part I'm hearing where the Celesta is missing? I've just pulled out the B&H score to have a look through.
One thing about combining reverbs - certain venues in MIR can be used with the MIRacle close orchestral enhance, as an overall addition to the sound, and it works beautifully. Though to use it, the convolution reverb Wet must be turned down overall. The advantage of that system is it has a richness but also more clarity than just convolution with more Wet. For a while I was routing the Vienna Konzerthaus Close Orchestral Stage, somewhat more Dry than default middle setting, into a Lexicon hardware reverb which had a Large Hall at around 40% Wet. This sounded really great and was used on a couple entire music library albums of mine. However, I discovered that MIRacle does the exact same thing without the external hardware and so have been using that on several mixes and love it.
There was some talk about the celesta - it is a unique sound and I've had trouble with it. It doesn't cut through the orchestra like glockenspiel, but if you turn it up in volume the low/mid frequencies are exaggerated. This of course because of the close up recording as opposed to where it is placed in an orchestral setting. I think I used an individual dry adjustment, and some EQ to tone down the low/mid.
Anyway I think overall it's sounding great and can just use some little adjustments to increase the clarity here and there. The amazing thing about MIR is default settings are close to perfect! So if one does not stray too far from those, and just tweak things a little, it works wonderfully.
William and Macker, thank you for your support!
Before thinking to the reverb, maybe I solved the issue of the Celesta. I had it sounding one octave too high. Maybe a case of double transposition? Dorico is for sure transposing. But the Vienna Player seems to be in the real pitch.
The VSL manuals says that the instrument is mapped one octave lower than written so it's probably already transposed, despite the shown octave transposition is zero.
The same happens with the Glockenspiel.
Macker: congratulation for catching it! Not easy, with these pure-harmonics sounds!
At this point, I don't know if I should change the octave in the VSL sounds, or remove octave transposition in Dorico. I think I will do the former, to always deal with the real pitch. It's the same with the double basses.
Paolo
