Hey all, so I'm gonna make this simple:
Master: iMac, High Sierra 3.5 i7, 24GB ram
Slave: PC, Windows 10 Pro, 16GB Ram, 3.6 8-Core Processor
The two computers are connected via cat6 cable
**VEPro6 has successfully run on both machines together, with no issues**
All of a sudden, the netoworked PC drops the audio as if it overloads, about every 8-10 seconds, no matter how many or how little instruments I load. I can't figure out what's going on, but its unusable since it's cutting out so much. And yes, both instances are up to date.
VEPro6/CPU load never exceeds 14%
*****EDIT*****
IP address and subnet mask had somehow changed on the Ethernet connection of my master machine. Changed it manually to correct specifications and issue was resolved. I should also mention I deleted the firewall port rules on the networked pc and rebuilt them, but I don’t think that was the nature of the issue.
-
[SOLVED] In desperate need of help - audio dropping in VEPRO6
-
I would look carefully a the PC network card. Obviously change the ethernet cable to check. I dont imagine you are using an adaptor of any kind from the mac but if you are change that as well etc. Try running them through a hub or network switch. Use network monitoring software to look at whats happening. Do other network connections drop? Can you see both machines from each other? Very frustrating |I know but just few ideas. Good luck!
-
Hi,
What are the network details? Could it be that you're trying to connect via wireless connection?
Best,
PaulSo when I disable the wireless connection on the PC, it doesnt show up on the server at all - which in a way is great, because at least I narrowed the dropout down to the fact that it was trying to run over Wifi. However, now when it's turned off, I can't see it at all and no changes have been made to my setup.
-
Hi, I have pretty much the same setup and am having the same problem. Every 15 seconds or so I get silent hiccups.. checked the cable, tried different IP's and still the same. The strange thing is that there may be a day that it works OK. I am builiding a template on Cubase.
It has to be the connection because it works fine on a single computer but not when not connected to slave.
Thanks,
Carlos
-
Hi calimbo76,
Have you tried deactivating Wi-Fi on your master computer?
Please send screenshots of the network settings on all involved computers to support@vsl.co.at
FYI: ajsealymusic´s problem has been resolved by reviewing the IP addresses and subnet masks in his network!
Best, Marnix