Vienna Symphonic Library Forum
Forum Statistics

194,115 users have contributed to 42,911 threads and 257,916 posts.

In the past 24 hours, we have 4 new thread(s), 14 new post(s) and 82 new user(s).

  1. Home
  2. Notation Programs & Vienna
  3. Others
  4. VE Pro5 loads wrong Sibelius Playback configuration
  • andiA
    VSL Team
    andiA

    Hallo wattsjf!

    This is really an odd problem. I haven't heard about such a case yet. Maybe you have a copy of this cembalo playback configuration somewhere, where Sibelius also checks for playback configurations. I would do a search for this playback configuration on your computer and delete it everywhere you can find it. Then rebuild it.

    I hope this helps.

    Best,
    Andi

    Vienna Symphonic Library
  • W
    W
    Hi Andi,

    I'm going to reopen this after several months, I hope you don't mind :)

    I have been managing the problem stated above without too much hassle, but would like to resolve this if possible. I've observed a number of things so I'm hoping these will help you pin down where the problem might be.

    I still get the problem where even though I link the playback device and soundsets are correctly matched and saved to the Sibelius file, that an old device profile starts up with VEP Server. But I notice the following now:

    1. This is only when I use the AU version of VEP. No problem when using the VST version.

    2. When I open the AU version and check the VEP Server Interface, there is *always* two instances on the top left corner drop-down menu: "Vienna Ensemble Pro" and "Vienna Ensemble Pro-1", even though I have never called two instances. When I do the same thing with the VST version, there is only one instance, and the drop-down menu says "Default".

    3. I somehow once managed to make this go away. It seems to always come back after utilizing VEP Event Input, or multiple instances of VEP.

    So, with my limited knowledge of your product, I now suspect that whatever preference or setting that is associated with the launch of VEP AU is corrupt, but I'm not sure which file that may be. It works fine on VST, but I'm worried that I'll get the same problem if I use multiple instances on the VST side as well!

    Would you have any thoughts? At your leisure would be fine -

    Best regards -
  • andiA
    VSL Team
    andiA

    Hello wattsjf!

    I'm sorry to say that I don't understand your problem.
    There shouldn't be any difference between the VST and the AU version of VE Pro. I don't think that your AU plugin is corrupt. Then it wouldn't work at all.

    Which software and menu do you mean, when you are talking about the "top left corner drop-down menu"?

    If you have one VE Pro instance too much in your Playback Configuration, why don't you just remove it and save your Playback Configuration again?

    Can you maybe describe in detail what you have done?

    Best regards,
    Andi

    Vienna Symphonic Library
  • W
    W
    Hi Andi,

    I'll take this one at a time :)

    I do realize there should be no difference between the VST and AU versions. Yet, the problem only occurs when I choose the AU version under Sibelius' Playback Device Menu. That is, when I configure the exact same set of instruments with VEP in AU, I get the said problem, when I configure using VST, I do not get the problem.

    The software menu I am referring to is the VEP Server Interface - there is a pull down menu on the top left hand corner - it should only have one instance, but somehow (under AU) it always opens two instances.

    Yes, I can close the one too many instance and save the correct one. But when I open the score again, it will continue to open an extra playback configuration and default on the one that has nothing to do with the score.

    Perhaps this helps? I might video tape the problem and upload it on youtube when I get a chance so you can see what I'm doing :)

    It's just odd behavior, and I can manually always close and reconnect to the right configuration - but it is a nuisance since I tend to go between many scores frequently.

    Your patience is much appreciated.
  • andiA
    VSL Team
    andiA

    Hi wattsjf!

    One Vienna Ensemble Pro Server Interface can only be connected to one Vienna Ensemble Pro instance. Maybe you still have two VE Pro plugins (aka VE Pro Server Interfaces) activated in your Sibelius Playback Configuration. I guess I still don't understand what's going on. Maybe a video would help indeed.

    Best,
    Andi

    Vienna Symphonic Library
  • W
    W
    last edited
    last edited
    Hi Andi,

    Per my previous posting, I don't know if this is the reason I always get the wrong instance launched despite saving the correct instance with the Sibelius file, but I think it is somehow related -

    Here is a screenshot.

    Note that I only have one VE Pro plugin activated. Yet, upon every startup of the *VE Pro Server Interface* it will always have two instances open from the very start (Sibelius will only show one plugin in the playback configuration).

    Here is another one after I manually open a new instance "Study for Orchestra" (since Sibelius fails to open the correct instance, I have closed the wrong instance and opened the correct one from the VE Pro menu).

    After I disconnect and close the erroneous instance as initially loaded, everything goes away and there are no instances in either VE Pro Server, or VE Pro Server Interface. However, when I manually open the correct metaframe (Study for Orchestra), VE Pro Server Interface once again shows two instances as in the second screenshot.

    Now we have one instance in VE Pro Server because I have disconnected and closed the erroneous instance prior to opening the correct one, but the two instances in VE Pro Server Interface pull-down menu reappear, and there is still another [New] instance available in the Available Instances window.

    Oddly, if I create and call the exact same instance in VST (as opposed to AU, which is the case here) I never have the same problem. That is, the *correct* instance (Study for Orchestra) will open automatically with no problems. No double instances, no trouble.

    Thus, I think there is something corrupted in terms of the AU configuration, but I've tried replacing every file I can think of with no avail!

    What do you think?

    Thanks and regards -
  • andiA
    VSL Team
    andiA

    I don't think that there is anything wrong with your installation.

    It seems to me that you have a preserved and an unpreserved instance of VE Pro. In the preserved instance you made your instrument setup, while the unpreserved instance only includes a Cembalo. In order to connect to your VE Pro instance with all the instruments, it should be enough to click on Disconnect in the VE Pro Server Interface and then connect to your preserved VE Pro instance (Study for Orchestra). This way the unpreserved instance should disappear. Then save your Sibelius Playback Configuration and if you want to your metaframe.

    Best,
    Andi

    Vienna Symphonic Library
  • W
    W
    Haha, I know what you saying, and that brings me back to the first question, which is why Sibelius loads the unpreserved cembalo VE Pro Server configuration despite my never saving that instance, let alone with the Study for Orchestra playback file. When I open the Sibelius file, it always asks me if I want to load the Study for Orchestra instance, and I say "yes" and it always stops half way loading, and brings up the cembalo instance!

    I'm sure there is some garbage that is corrupted...or does an unpreserved instance stick around even after all the apps are closed? How would I go about completely deleting the "unpreserved" instance?

    >This way the unpreserved instance should disappear

    For what its worth, the second instance never disappears although I can disconnect from it - as in the second screenshot - it just stays open as "New". When I reconnect to "New", I don't get a blank instance, it's always the one with cembalo! It also reappears every time I load the Study for Orchestra Sibelius file - despite my not saving it of course...
  • andiA
    VSL Team
    andiA

    We're moving in circles. Maybe you can make a video as you have suggested in an earlier post.

    You could also send me your score and Playback Configuration (xml file and data folder with fxp files) to support [at] vsl [dot] co [dot] at and I will take a look at it.

    On Mac computers Sibelius Playback Configurations can be found at the following place:
    Users/your username/Library/Application Support/Avid/Sibelius 7/Playback Configurations
    Under Mac OS X 10.7 and 10.8 the Users/your username/Library folder is hidden by default. To get access go to the folder Users/your username. Then choose Go/Go to folder and enter “Library”.

    Best,
    Andi

    Vienna Symphonic Library
  • W
    W
    Hi Andi,

    Why don't I make a video for the whole sequence - it's much easier to see what I mean, please give me a while once again since I'm a bit tied up with projects at the moment.

    In the meantime, I sent you the files - I'm sure they'll run fine, but it would nonetheless be helpful that I can isolate the problem to my computer.

    Best, Watts
  • ErisnoE Erisno moved this topic from Notation Programs & Vienna on
  • ErisnoE Erisno moved this topic from Finale on
  • ErisnoE Erisno moved this topic from Notation Programs & Vienna on
  • ErisnoE Erisno moved this topic from Dorico on
  • ErisnoE Erisno moved this topic from Notation Programs & Vienna on