Vienna Symphonic Library Forum
Forum Statistics

196,644 users have contributed to 43,021 threads and 258,416 posts.

In the past 24 hours, we have 0 new thread(s), 0 new post(s) and 92 new user(s).

  1. Home
  2. Software
  3. Vienna Instruments Pro
  4. VEP slow connection times

  • VEP slow connection times

    G
    G

    its talking about 5+ mins for my mac daw logic to connect to my pc slave with 19 (x16 channels each)  connections. going through gigabite ethernet hub.  (samples already loaded. takes longer to connectt than to load the samples :-/  ) 
    is this normal? 
    logic 9.1.7 
    VEP 5.0.107 (may 14 2012)
    the pc has windows 7 64 pro. 
    intel i7 930 @ 2.80ghz 
    24gb ram
    ip settings:
    Connection-specific DNS Suffix: 
    Description: Realtek PCIe GBE Family Controller 
    Physical Address: ‎1C-6F-65-35-75-90 
    DHCP Enabled: Yes 
    IPv4 Address: 192.168.0.3 
    IPv4 Subnet Mask: 255.255.255.0 
    Lease Obtained: Sunday, June 24, 2012 9:10:45 AM 
    Lease Expires: Wednesday, June 27, 2012 9:10:45 AM 
    IPv4 Default Gateway: 192.168.0.1 
    IPv4 DHCP Server: 192.168.0.1 
    IPv4 DNS Server: 192.168.0.1 
    IPv4 WINS Server: 
    NetBIOS over Tcpip Enabled: Yes 
    Link-local IPv6 Address: fe80::f909:6eea:a1b0:24a9%10 
    IPv6 Default Gateway: 
    IPv6 DNS Server:

  • Cyril BlancC
    Cyril BlancC

    using fixed Ethernet adresses normaly fixes the problem

    set your slave using DHCP, note down all the values

    then set it with Fixed Ethernet and fill the fields with the value you just add
  • M
    M
    I've used Logic as my DAW and connected to a PC slave using gigabit ethernet. Generally, I find it slow, so my guess is, this is normal. 19 →Instances← of 16 channels each... 5 + minutes may not be bad at all. But Cyril is probably right.