@Sami Boman said:

I'm a bit curious about the natural volume altogether. How has the team come up with individual volumes of the instruments? Is it set with a trained professional ear or do you have some kind of documents of the original recordings which reveal how much normalization was used during them with each instrument?

We have indeed made extensive measurements from a considerable number of instruments for MIR's "Directivity Profiles", so we have a list of levels for different dyncamics and playing styles. But in the end, all Natural Volume settings were fine-tuned manually by The Boss (Herb Tucmandl) himself. 😉

@doubleattack said:

[...]

I've noticed that the natural volume of the tenor-trombone (from dvd - brass 1 lib) is much louder compared to the other trombones of the family, like bass and alt trombone. So to say unnatural louder. 😊 The loaded natural volume is -6.99 db, but it seems to me it should be maybe - 16.99 and than it fits. So my impression there is a little mistake in there? Or I'm wrong? [...]

Frank

Thanks for reporting, Frank. We'll look into it ASAP!

I wanted to second that I felt the trombone was surprisingly loud when I briefly tried MIR SE.

In general, does "natural volume" setting also adjust how the entire dynamic range maps to loudness?  Or does it just adjust only a fixed gain on the volume of that entire instrument?

Best Regards,

~Shawn

@suon said:

I wanted to second that I felt the trombone was surprisingly loud when I briefly tried MIR SE.

In general, does "natural volume" setting also adjust how the entire dynamic range maps to loudness?  Or does it just adjust only a fixed gain on the volume of that entire instrument?

Best Regards,

~Shawn

The dynamic range of a single instrument is consistent within its mapping inside Vienna Instrument already - that's nothing MIR has to take care for.

Natural Volume is "just" a volume setting that allows for the creation of any kind of orchestral arrangement in a MIR Venue - with the volumes of all Vienna Instruments aready set to a meaningful basic value in relation to each other. Of course, this also means that many instruments are set to a seemingly low basic value, but you have to make up lots of headroom for those _really_ loud instruments like Tamtams etc. If you don't use loud instruments in a specific arrangement, you can always group all instruments and bring their volumes up to a more convenient range, or you simply push the master fader. MIR's signal path is 32 bit floating point throughout the whole engine, so the result will be more or less the same. Just make sure that you don't overload the output itself.

... we'll look into that Tenor Trombone settings ASAP.

HTH,

@doubleattack said:

[...]

I've noticed that the natural volume of the tenor-trombone (from dvd - brass 1 lib) is much louder compared to the other trombones of the family, like bass and alt trombone. So to say unnatural louder. 😊 The loaded natural volume is -6.99 db, but it seems to me it should be maybe - 16.99 and than it fits. So my impression there is a little mistake in there? Or I'm wrong? [...]

Frank

Thanks for reporting, Frank. We'll look into it ASAP!

Before I forget:

I tested the Tenor Trombone with its Natural Volume settings, and I can't find anything wrong there ...

The value is -7 dB, and this level fits perfectly, I dare to say - also in comparison with the Tenor Trombone Ensemble, or the C-Trumpet, for example.

You  are right that the Bass Trombone is set to a slightly lower Natural Level, but this is not an error. The instrument needs more air to achieve at the same level as its higher-pitched brother, so this difference seems to be quite natural (if you allow for the pun ;-) ...)

I know that it is hard to fit all needs and tastes, but in the end, a different volume setting is always just a mouse-click away. :-)

Kind regards,

Have had MIR PRO for a couple of days now and I'm extremely excited about this wonderful tool. Although I'm having the same kind of problem with the tenor trombone. It sounds overwhelmingly loud compared to other brass instruments when using the natural volume setting. It absolutely runs over all the other brass combined. Though I think the tenor trombone fits perfectly with the other instrument groups so from my point of view the problem is with all the other brass. They are too quiet. When all the instrument groups (except percussion) are playing in ff the brass section is almost inaudible.

I managed to dodge the problem inside the brass group by loading the instrument profile of alto trombone for tenor trombone and raising the volume setting from -13.5dB (alto trombones natural volume) to tenor trombones natural volume of -7.00dB. This way the tenor trombone is much more quiet than with the same volume setting on it's own instrument profile and fit's much better with the other brass. Although this way the entire brass group is too silent compared to  the other instrument groups and has to be "boosted" pretty much. I think, when using the natural volume settings, the brass group starts to sound somewhat right when pushed about 12dB's louder than the other other groups.

I'm using the special edition & SE PLUS full libraries with logic pro 8. I have all the different instrument groups on their own instances of VE PRO 5 and the volume settings of all the master busses and the corresponding tracks in Logic are set to the same level with each other. I don't know if I have some setting on or off that quiets the brass group (except the tenor trombone) down or what, but I think the balance between these instruments is pretty weird.

Well - like mentioned before: Natural Volume is meant to be a generalized starting point, and its values aren't written in stone. (Sidenote: This is about the same problem I encounter when doing any kind of  "Mixing Presets". Every arrangement actually asks for specific, individual solutions, as all settings depend on the context es well as on personal taste.)

... as a matter of fact, we have discussed the option to allow fo user-defined default volumes in addition to the Natural Volume settings (or replacing them). Maybe this is a feature that will be included in a later version of MIR Pro.

But anyway - thanks for all the interesting input!

Kind regards,

I hope you won't replace the natural volume settings with anything, they are indeed a veryhelpful starting point, but in addition user-defined default volumes sound like an excellent idea.

*takes note* ... ;-)