Vienna Symphonic Library Forum
Forum Statistics

200,804 users have contributed to 43,212 threads and 259,133 posts.

In the past 24 hours, we have 3 new thread(s), 6 new post(s) and 51 new user(s).

  1. Home
  2. Software
  3. Vienna Instruments Pro (legacy)
  4. VEP dropouts, clicking...
  • F
    F

    Hi Paul,

    are you referring to the I/O buffer settings in Logic?  I changed those from 64 to 128 but the problem still exists.  I didn't experience any latency issues on the slave (note delays etc.) to begin with.  It all looks/sounds like as if the CPU is maxed out but the CPU meter on the VEP instance fluctuates only between 20% and 70%.  The fewer tracks in an instance of VEP the less the dropouts/stuttering it seems.  Could I have a wrong network setting between master and slave?

    Thank you!
  • PaulP
    VSL Team
    PaulP

    Hello Felix, 

    Did you try with a higher latency setting like 256 or 512?

    Best, 

    Paul

    Paul Kopf Head of Product Marketing, Social Media and Support
  • civilization 3C
    civilization 3C
    last edited
    last edited

    @Felix L W said:

    Could I have a wrong network setting between master and slave?

    You could, you could have dynamic IP.
  • F
    F

    Thank you! 

    It looks like that setting the Macs to a static IP has helped!
  • J
    J
    Besides setting the IP manually on the Mac, is there anything else you need to set for it to be a Static IP? Because I set this on my Mac and I still get dropouts. I have 2 Mac's going through a Linksys Gigabit switcher (5 port) is there something in the switcher that needs to be set? Thanks for any help!
  • PaulP
    VSL Team
    PaulP

    Hello J111111, 

    Did you try to connect the computers directly, simply with a LAN cable?

    Just to rule out that the Linksys switch has something to do with this. 

    Best, 

    Paul

    Paul Kopf Head of Product Marketing, Social Media and Support
  • D
    D

    Just to add to what Paul; asked, does your switch come under the heading of a "Green" switch? If so this can also cause problems, so it might be worth trying a different switch, if you absolutely need to have a switch, rather than connecting the computers directly to one another.

    Just to be absolutely sure:

    1. Have you disabled any other networks on either computer?
    2. Have you disabled any wireless connections?

    DG
  • J
    J
    Thank you for your help! It's the Linksys EG005W v.3 (5 port) giga bit switcher. It doesn't say anything about it being green.. Do you know? A friend of mine uses the same one and doesn't experience drop outs... I have to use the switcher because I also use MoL Cp3 to connect to my PC's that host giga studio etc. Question: My 2 Mac Pro's have 2 ethernet ports. Is it okay (or would it be problematic) to use Port 1 for switcher/MoL and Port 2 to connect my 2 macs together? **only my Macs have VEP server on them. I've gone through every combination of settings possible software wise and still i've had drop outs for over a year. I'm really thinking its a hardware issue... any help would be greatly appreciated. Thanks!!! (btw - VE-Pro is AMAZING :) )
  • D
    D

    Well you should test without MOL and only one Ethernet port active to make sure that things work well. Then gradually add in the other stuff. That way you will find out where the problem really is.

    DG
  • J
    J
    last edited
    last edited

    @DG said:

    Well you should test without MOL and only one Ethernet port active to make sure that things work well. Then gradually add in the other stuff. That way you will find out where the problem really is.

    I remember doing this test last year, and the drop out still happened. I recall I just had 1 instrument loaded with 1 instance of VEP going to an empty template of DP7. And it still dropped out...

    I'll do the test again and see, but what could it be if the drop outs continue even with this bare bone setup?

    Thanks for any help!! ~J