The first MIR for Mac is likely to be MIR Pro, which is due some time at the end of this year, or the start of 2011. However, there has been no word on whether the initial release will be for OSX as well as Windows. There are no plans to port the current version of MIR or MIR SE to OSX.

DG

@DG said:

[...] There are no plans to port the current version of MIR or MIR SE to OSX.

Confirmed. Actually MIR Pro will be a completely new engine (... it _has_ to be, mostly for OSX compatibilty). It will have very little in common in the with the current version of MIR, apart from the underlying audio and GUI concepts.

 In this developement stage, are there differences in the number of instruments/same hardware PC configuration ratio Windows vs. OSX?

@Sergino Futurino said:

 In this developement stage, are there differences in the number of instruments/same hardware PC configuration ratio Windows vs. OSX?

Sorry, but we have no real world experiences in this regard yet.

 So we must understand that it's still a long way to MIRPROrary? [8-|]

Yes, of course. Don't expect a finished product before the end of the year. Thanks for your patience!

If you are planning to have Beta testers....I would be very excited to be part of a Beta program;-)

christof

Hi,

  Okay, so it now looks like a newer version of MIR, compatible w/ Mac OSX is coming out in 2011.  I've been holding off buying a new computer until MIR for Mac comes along.  I'm interested in what a previous writer wondered--are the new MacPros w/ their six processors able to handle MIR w/out MIR being on a separate computer?  If so, I'd think about selling my current computers and getting a new Macpro in anticipation.  In general, what's the word on the new MacPro's?  They look impressive (expensive, too).

Thanks.  All best,   Tom

Please make an affordable (SE) type version of it, please! I'm sure there are alot of 1x Macpro Users out there who would love to use the same computer. 

@harry_25654 said:

Please make an affordable (SE) type version of it, please! I'm sure there are alot of 1x Macpro Users out there who would love to use the same computer. 

They'll have to wait for MIR Pro SE, whenever that comes out.

DG

@Tom23 said:

Hi,

  Okay, so it now looks like a newer version of MIR, compatible w/ Mac OSX is coming out in 2011.  I've been holding off buying a new computer until MIR for Mac comes along.  I'm interested in what a previous writer wondered--are the new MacPros w/ their six processors able to handle MIR w/out MIR being on a separate computer?  If so, I'd think about selling my current computers and getting a new Macpro in anticipation.  In general, what's the word on the new MacPro's?  They look impressive (expensive, too).

Thanks.  All best,   Tom

Tom,

thanks for your interest in Vienna MIR. I f you don't need the new machine _now_, I would wait for the actual release of  MIR for Mac and see what's available then. AFAIR, computers never got more expensive during the last 30 years or so ... 😉

Kind regards,

@Another User said:

AFAIR, computers never got more expensive during the last 30 years or so ... ;-)

Hey Dietz,

I'm a big reverb guy and have almost everything VSL has ever made - but not Mir - and that allows for the fact that I acknowledge that Mir is both great and incredibly unlike any other reverberator ever conceived.

I love VE Pro and I love Vienna Suite (and the combination of both). Now after a week you couldn't rip VI Pro from my fingers with the jaws of life.

But in order for me to switch over to Mir (as much as I would like to be able to do it today!) you're going to have to adapt the workflow to allow for these other tools.

I hope that Mir Pro is able to accommodate these things. I want Mir Pro on the master along with the sequencer and this being fed by a couple of VE Pro slaves using VI Pro. I want to be able to use my other hardware and software reverbs in a hybrid mix outside of Mir within my sequencer. Can't wait until I get this kind of setup working. Plus I don't want to have to reload my VSL templates every time I need to reboot my master machine. Master machines have to be booted so many extra times because of installation and upgrades.

Another good word for VI Pro - it's really, really extended the life and usefulness of all the VSL sample libraries.

Congratulations you guys are so fantastic.

.

 Jack, as MIR Pro will be able to accept audio inputs, all of the above should be possible.

BTW, these reasons are why I don't use MIR either. [;)]

DG

Hi DG,

So what you're saying is the MIR Pro is going to only accept audio inputs from slave machines and not the direct ethernet input from VE Pro on those slaves?

Will we be able to output from MIR Pro back into the sequencer on our Master machines to be able to do hybrid mixes using our current hardware and software reverbs?

Thanks.

.

 I can't answer your question directly, but i would imagine that the routing will be:

1. MIDI from sequnecer to VE Pro
2. Audio return to sequencer from VE Pro
3. Route audio return as input into MIR
4. Route mix out of MIR

That should give you the opportunity to use sends from the VE Pro audio return to any other software or hardware FX unit, including your Bricasti.

DG

Hi again DG,

Looking for some clarification since I have no practical experience with MIR to date and just so my mind doesn't insinuate too much ambiguity into this particular scenario. (BTW I won't hold you to whatever the final product actually ends up being - I'm simply relying on your knowledge and background regarding this.)

1. MIDI from sequnecer to VE Pro                 (via ethernet to slaves handling VE Pro w/ VI Pro?)
2. Audio return to sequencer from VE Pro  (So the outputs of the VE Pro slaves get back to the sequencer via stereo audio interface channels? So I would need audio interfaces for all computers, presumably w/ lots of channels to handle all the separate instruments that want to be handled in the MIR process?))
   
3. Route audio return as input into MIR       (Huh? Are you referring to the audio that is now within the sequencer back from the slaves?
   
4. Route mix out of MIR                                   (Back to Sequencer specifically, so it can handle the outputs of MIR Pro as a stereo [or more channels] mix to add to a hybrid mix with elements available to the Sequencer? For example, instruments that won't want to see MIR processing, host sequencer effects and processing including external hardware. It'll be interesting to think how I will go about saving a complete Song/Session in this process. )

Jack, I have no more information than you do, so I really can' answer your questions, other than making uninformed assumptions. Maybe Dietz will be able to chime in here.

DG

Jack, as much i appreciate your interest, please be aware that MIR Pro is under development, so it's too early to publish detailed feature lists.

Concept-wise, we head for a solution that allows a deep integration of MIR's underlying principles into any DAW; in its "MIR Pro"-incarnation you should be able to use it as an alternative mixing front-end then (... or as highly specialized submixer, if this is what you're after).

HTH,

Thanks Dietz,

I do realize the restaurant's menu is not set yet. 

Looking forward to a sumptuous meal. 

.