183,050 users have contributed to 42,273 threads and 254,975 posts.
In the past 24 hours, we have 1 new thread(s), 5 new post(s) and 47 new user(s).
Hi,
I may jump in for Martin here...
I am working with Cubase 5 on quite a few machines, no troubles so far. If you have a chance, you might be able to "testdrive" Cubase 5 somehow (maybe one of your colleagues is using it?).
Hard to say if it will solve your problem, but I think you have a fair chance.
Best,
Paul
I'm running seven VE PRO plugins in DP 7.1 and get these annoying audio dropout constantly. It is very annoying during work but also makes it very hard to record audio mixes, because I have to start over many times, and then I have to even resort to cutting and using different takes to get a good whole piece without audio dropouts.
I have Mac Pro 2 x 2.8 ghz xeon, 12 GB RAM, with Snow Leopard as host. Slave PC:s are 64-bit Vista and all have i7 processor and 12 gb memory. All updates have been installed in everything.
Just got the final word on what was causing the dropouts. I had DP set to "Pre-gen mode when possible" in the Preferences->Audio Plugins. It should have been set to "All plug-ins in real time."
Thanks to Matt from MOTU for solving this issue.
@Kevin Kliesch said:
Just got the final word on what was causing the dropouts. I had DP set to "Pre-gen mode when possible" in the Preferences->Audio Plugins. It should have been set to "All plug-ins in real time."
Thanks to Matt from MOTU for solving this issue.
Didn't help for me 😕
Hi, I have a pretty similar setup to casual-t, and am running cubase 5. I'm getting very similar behavior while using VE Pro with East West's Play engine. Random dropped sustained notes. It can be working fine, and then randomly specific notes drop out. The dropouts always occur on the same tracks at the same point, but there is nothing in particular which triggers when it will happen or not. Once it happens once, I can't do anything to fix it short of reloading the project, but it inevitably happens again. Tried many things to no avail. Anyone else experiencing similar things? Is this just another VE Pro and Play incompatibility issue? I tried running the same project only on my slave, with Play loaded directly into Cubase, and VE Pro hosting Kore 2 and experienced no dropped notes. Have yet to test it on the slave with VE Pro hosting Play. Any one else having this problem with Play? Any insight would be great. Thanks, j.@casual-t said:
hello everyone!!
i'm experiencing some issues with VE PRO, and would hope that one (or more) of you fine ladies and gents might be able to lend a helping hand in figuring out what the problem might be. first off, this is my set up:
DAW01 - master
pc
intel core2 quad 2.6GHz
3GB ram
xp pro
cubase 3.1
DAW02 - slave
pc
intel core2 duo 2.94GHz
8GB ram
vista home premium 64bit
VE PRO
both machines are connected through a working gigabit hub, using cat6 cables.
so far so good, but here's the problem... i get RANDOM audio drop outs, some slight clicking, and stuck midi notes in VE PRO, even if i only play, lets say, some sustained notes in the string section. i've been trying to figure this out for days, and i'm slowly but surely running out of ideas. the drop outs seem to be completely random, and i was not able to find any correlation to cpu spikes, ram faults, buffer size, or anything else i can think of. daw02 cpu is running at maybe 15%, network is at 1-5%, ram is at 29% - so not even close to max. the only thing i was able to detect via the task manager, is that at every audio drop out, there's a very slight dip in the network usage on both daws.
btw: just before installing VE PRO, i tested the trial verison of VE3, which worked FLAWLESS.
so this is my call for help. if anybody has any ideas... let's have it. your help is most definitely very much appreciated.
thanx all!!!
t
I too am experiencing random dropouts. Using Logic 9 on Mac Pro Dual Quad with 10G.
This random dropout happens even when I am playing one instrument only. It is more like the random dropout you get when demoing a program. I am saying that even without any load being placed on sample playback, audio drops out randomly.
Try using "built in Audio". Do you still get the dropouts?
Which audio hardware/drivers do you have?
Check your hard disk drive where the VSL content is stored: Is it fast enough (min. 7200 rpm)? Is it maybe too full or fragmented?
In case that the problem persists we will need some more detailed information about your setup, including software versions numbers and a description how exactly your VSL software is used.
Kind regards,
Maya
Maya, It is not disc speed or fragmentation because I am not using any of the VSL instruments. I am using VE Pro with my old Kontakt template. 4 instances. One each with one Kontakt with one section of the orch. I put a short section in a loop and it played fine over my built-in audio BUT it played fine (as loop) with my Mobile I/O ULN 2 also.
The dropouts happen (most of the time) just as I start my timeline running in Logic Pro. The dropouts are not like small dropouts. These are up to a second or more long. As I said, it is like a demo restriction with audio just dropping out for a second.
In one case I noticed that there was no VU movement in VE Pro during a dropout.
Mac Pro 2 x 3.2 GHz Quad Core Zeon, 10 G ram
System 10.5.8
Logic Pro 9.0.2
Kontakt 4.0.12755
Mobile I/O 5.2 (with latest and correct firmware)
VE Pro v4.0 build 4686
I always boot my computer and then load VE Pro first. If I don't do that VE Pro does not work correctly. I can modify the current (Kontakt) instruments when they are in VE Pro but I cannot load any new instruments or VE Pro will freeze with spinning beachball.
I have 4 instances of VE Pro running in the server. One each with one instance of Kontakt.
Maya, I do NOT use any external midi (is that what you mean by midi plug-in?)
NO IAC busses.
I try to keep my system as bare bones as possible. There are no other apps running when I'm using VE Pro except for Logic Pro.
Additional info. It seemed (and I will gain more info today as I work) that the dropout got longer as I worked. It started as a hesitation and became a 1+ second gap.
This morning's experience does not verify that the dropouts are only when I PLAY my project. I've noticed that the dropouts can happen any where, any time. Its not like its happening all the time. A few minutes can go by without dropouts. But they are regularly occurring (in a random sort of way).
BTW I should mention (this just dawned on me) that all of the VE Pro instruments drop out at the same time. Any instruments that are instantiated in Logic continue to play.
I've added a piano in EXS only recently, so please do not take into account that there are any instruments loaded in Logic that may cause this problem since my earlier posts were results from VE Pro being the only loaded instruments. No standalone and none in Logic (except for the added piano).
BTW I am not getting a scroll bar in your forum on at least one of my computers running Safari.
Its 5:25 and after a day of working with this project, the dropouts are lasting about 3 seconds. As an additional problem, I believe that some cc information is not getting through. I am getting many stuck notes and have had to put multiple cc points on each line to make sure that the cc info is picked up.
