194,118 users have contributed to 42,911 threads and 257,916 posts.
In the past 24 hours, we have 3 new thread(s), 13 new post(s) and 81 new user(s).
i never was able to use mir, couse it allways crashes. is there any solution
macpro 2.226 nehalem 16 vcores 12 gb ram .
i realy like to try this...
is there a way maybe to get week more to try it out ? couse today its the last day... maybe thats the problem
vista 64 sp1
it allways crash when i enable the engine..
last day of the license is today... could this couse the problem ?
i use a rig kontrol 2 wich is an asio interface
ich benutze die rig kontrol 2... weill apogee duet wird unter windows nicht unterstützt und die mbox 2 wird von mir nicht gefunden.
anscheinend macht die ntdll.dll probleme
it seems that the ntdll.dll is crashing.
Problem signature:
Problem Event Name: APPCRASH
Application Name: Vienna MIR.exe
Application Version: 1.0.0.1563
Application Timestamp: 4aa043da
Fault Module Name: ntdll.dll
Fault Module Version: 6.0.6001.18000
Fault Module Timestamp: 4791adec
Exception Code: c00000fd
Exception Offset: 0000000000047b9a
OS Version: 6.0.6001.2.1.0.256.1
Locale ID: 1031
Additional Information 1: 46f9
Additional Information 2: fa562687f56efb52c2ecdc0594571eaa
Additional Information 3: 7b4c
Additional Information 4: 30e2ee0f2efb3537dbbbfb3387f8191d
Read our privacy statement:
http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409
i never was able to use mir, couse it allways crashes. is there any solution
macpro 2.226 nehalem 16 vcores 12 gb ram .
i realy like to try this...
is there a way maybe to get week more to try it out ? couse today its the last day... maybe thats the problem
[/quote]Did you say you're on a Mac Pro? As far as i know MIR isnt available for Macs. Windows only. Even if you're running a windows system on a mac, i still dont think it's workable.
I could be wrong.. im a mac user, so dont have the chance to know the first thing about MIR, but just wanted to point that out.
-michael
yes i am running vista 64 on this macpro.
vsl ensemble 64 is running there too without much problems
yes i am running vista 64 on this macpro.
[/quote]
This should be ok.
What buffer size did you select in the driver dialog of your audio interface? MIR supports only powers of two (28,256, 512...), any other buffer size should cause a warning (we had crashes with older versions there).
Do you see an ASIO driver for your mbox 2 in the audio settings dialog of Vienna Ensemble?
What happens exactly, when you start the engine - do you see a blue status bar at the bottom (indicating the progress of impulse response preprocessing) or does it crash right after you press the button?
Oh, and did you already try Asio4All?
This might help to figure out if there's just a problem with your rig kontrol or a general issue with MIR on your machine.
I hope we can figure out what's wrong here, Florian
i dont see the asio driver for my mbox 2 :/
can we talk german please ? :)
i see the blue status bar when i start the engine, but this just works if i have no instrument inserted... when i load some instruments, then it will crash when i start the engine.. or if i have the engine allready loaded and tryin to load some thing inside it will crash too...
whats asio 4 all ?
do you think it could be a rig controll problem ?
can i get some more days on mir ? couse this is the last 30 minutes i can use it... :/ and it doesnt work.
is there a telephone number where i can reach you ?
question: if you don't see the ASIO drivers, how can you change buffer size then?
more questions: how do you feed MIDI, i.e. is there a sequencer installed on the machine?
if yes, please double check you don't have any MIDI or audio loops configured.
please make sure the mbox is NOT set as default audio device in windows (control panel, audio settings) - the mbox drivers are not multi-client, so any other application configured for the mbox will prevent MIR from accessing them.
driver & firmware version? vista SP1?
christian
i just can see the guitar rig kontrol in asio... and there i can change the buffer size inside MIR.
asio doesnt recognize the mbox2... on this computer is no sequenzer installed. we use a motu micro lite midi interface @ this machine. on the sequenzer machine there is a logic 8 with a digi 003 wich sends the midi data to the motu midi interface.
the default audio device is the built in realtek from apple.
using windows vista 64 sp1
driver and firmware from wich hardware ?
well, from your posts above i've been reading your audio device (on the mac pro) is the mbox2 and google returns a lot of results with asio problems on vista, so i asked for firmware and driver version ....
guitar rig is a software, right? so which ASIO (from which sound device) do you see in rig kontrol?
christian
rig kontrol is an audio interface :) mbox 2 is not pluged into the pc becouse asio did not recognize it.
by the way i tried asio 4 all and used the realteak (built in sound card) its still the same problem.
i only see the rig kontrol device and asio4all in asio.
some posts ago someone told me i should try asio 4 all and tried it with it and the internal sound interface.
but its the same result
i only see the rig kontrol device and asio4all in asio.
[/quote]
And when you try to use asio4all MIR still crashes? Asio4all worked fine on several PCs for me...
Right now we try to allow MIR to load the mbox driver as well, I'll get back to you as soon as there's a new MIR build available.
I guess you already noticed, you got a new trial license for another 30 days.
Florian
