Vienna Symphonic Library Forum
Forum Statistics

194,393 users have contributed to 42,917 threads and 257,958 posts.

In the past 24 hours, we have 3 new thread(s), 5 new post(s) and 87 new user(s).

  1. Home
  2. Software
  3. Vienna MIR & Vienna Suite
  4. Headphones for Mobile Work
  • T
    T
    Thanks Jay - do you use them direct into your Mac/PC - I've heard that some machines will have trouble driving them due to their high impedence?
  • JBacalJ
    JBacalJ

    Yes they are plugged right into audio jack on pc.   Plenty loud!   No need for separate headphone amp.

    Best,

    Jay
  • Beat KaufmannB
    Beat KaufmannB

    I'm doing most of the work with a HD 600 as well. A confortable headphone with a high quality sound.

    Keep in mind: The HD-600 is an "open" model (I don't know whether this is the correct expression or not).

    If you are looking for a headphone for live recordings it wood be better to get a "close" one.

    Kind regards

    Beat


    - Tips & Tricks while using Samples of VSL.. see at: https://www.beat-kaufmann.com/vitutorials/ - Tutorial "Mixing an Orchestra": https://www.beat-kaufmann.com/mixing-an-orchestra/
  • H
    H

    I also use the HD 600's, but contrary to the others, I won't recommend them.

    The sound quality is superb and very detailled, much more so than in my previous headphones (Denon, can't remember the model).

    However  to me the HD 600 headphones feel slightly annoying to wear.

    It's usually not something I feel until after taking them off.

    Then I get the feeling - oh, that was nice (to get them off).

    Anyway, if I were you, I would probably go down to the nearest high quality audio store with a bunch of your favorite CDs.

    Then sit down and listen to these CDs.

    To begin with, try several different headphone models with different price tags.

    Switch between them to compare.

    Then when you find the pair you like the most, make sure you spend at least 30 minutes wearing them.

    If you still like the headphones after this, that's the model you should buy :)

    Good luck with it!

    Best regards,

    Henrik
  • H
    H

    Btw. do yourself a favor and buy a pair where you can switch the cable if necessary.

    Then you don't have to buy a whole new set of headphones if the cable gets damaged.

    You can do that with the HD 600's. I just did a few weeks ago.
  • T
    T
    Thanks for the comments so far guys - I'll probably pop into DV this week and see what they have on offer.

    Looks like there's a problem with the UK distributor for the Ultrasone's - had an email from the parent company saying they're looking for a new distributor and it'll take 10 days at least before things are sorted out - if anyone has any experience of them please let me know if I should hang about or not

    Cheers

    Tim
  • Beat KaufmannB
    Beat KaufmannB
    last edited
    last edited

    @hbuus said:

    I also use the HD 600's, but contrary to the others, I won't recommend them.

    The sound quality is superb and very detailled, much more so than in my previous headphones (Denon, can't remember the model).

    However  to me the HD 600 headphones feel slightly annoying to wear.

    It's usually not something I feel until after taking them off.

    Then I get the feeling - oh, that was nice (to get them off).

     

     

    You are right Henrik, I remember, the pressure of the two earpieces was too high. I bought the "bridge" (don't know the correct word) of the next lower model and exchanged the original. Since then - every thing is OK.

    Beat 

    - Tips & Tricks while using Samples of VSL.. see at: https://www.beat-kaufmann.com/vitutorials/ - Tutorial "Mixing an Orchestra": https://www.beat-kaufmann.com/mixing-an-orchestra/
  • H
    H

    Beat, thank you very much for the tip.

    It is indeed the pressure that is too high!

    I didn't know you could switch 'bridge' (don't know the correct word either!)

    That is definitely something I will look into.

    Best regards,

    Henrik
  • Beat KaufmannB
    Beat KaufmannB
    last edited
    last edited

    @hbuus said:

    Beat, thank you very much for the tip. It is indeed the pressure that is too high! I didn't know you could switch 'bridge' (don't know the correct word either!) That is definitely something I will look into.

    Best regards, Henrik

     

    I tried to give you the spare part number of the "softer bridge" - but then...

    Sorry for the bad news now... I've checked the headphone box. I'm owner of a HD-650 with a "bridge" of a HD-600.

    So I'm not sure whether the upper tip works for you.

    The story is that I tried to widen the "bridge" because of the high pressure. "Fortunately" the brige was broken then.

    Then I realized in the headphone store that the model HD-600 has a softer "pressing force"... I ordered the spare part

    "bridge HD-600". Because the name of the headphone is printed on this bridge I thought first that I'm owner of a HD-600.   

    Best

    Beat 

    - Tips & Tricks while using Samples of VSL.. see at: https://www.beat-kaufmann.com/vitutorials/ - Tutorial "Mixing an Orchestra": https://www.beat-kaufmann.com/mixing-an-orchestra/
  • Beat KaufmannB
    Beat KaufmannB

    BTW

    In the manual of HD-650 (bought around 2006/2007)

    ... caliper pressure     3,4N

    Current Sennheiser Homepage

    HD-600 / HD-650

    ... caliper pressure     2,5N    ?

    Beat

    - Tips & Tricks while using Samples of VSL.. see at: https://www.beat-kaufmann.com/vitutorials/ - Tutorial "Mixing an Orchestra": https://www.beat-kaufmann.com/mixing-an-orchestra/
  • H
    H

    Well, anyway, I will contact the shop where I bought the Sennheiser's and ask them if anything can be done about the pressure.

    Perhaps it's possible to adjust it somehow, who knows.

    Mine are also from around 2006/2007 btw.

    I do like the headphones very much, yet a slightly lesser pressure would still be nice :)

    Best regards,

    Henrik
  • T
    T
    By way of an update...

    I bought a pair of Sennheiser 650s which were pretty nice, but after a while they didn't strike me as anything special so in the end I returned them and bought myself a pair of Ultrasone 900s. These are fantastic - ok they're £100 more then the 650s but the difference is amazing. Very clear and precise and it's much much easier to pick out different instruments in a mix. Highly recommended!

    Regards

    Tim
  • C
    C
    I use AKG K701. Like them.
  • H
    H

    Just for the record, and in case anyone is interested, I have been in touch with Sennheiser about the too tight bridge on my HD-600's.

    Apparently the company produced a few batches of too-tight bridges a few years ago, which is exactly when I bought my pair.

    I can have the bridge replaced, so I am happy!

    Best regards,

    Henrik