Vienna Symphonic Library Forum
Forum Statistics

193,906 users have contributed to 42,901 threads and 257,875 posts.

In the past 24 hours, we have 3 new thread(s), 19 new post(s) and 74 new user(s).

  1. Home
  2. Notation Programs & Vienna
  3. Others
  4. New User Question: Changing articulations in Sibelius
  • J
    J

    I just purchased SE2 Strings to get harmonics, and I am having the same problems.  Inserting text or using diamond noteheads has no effect.  It plays as legato
  • andiA
    VSL Team
    andiA

    For the Special Edition PLUS you will need the Special Edition PLUS sound set. If you haven't done so yet, you can download it at the following location:
    http://vsl.co.at/en/68/375/460/295.htm

    Harmonics can be reached by two ways.
    1.) Add the Harmonic/Open articulation sign to the note (that's the small circle).
    2.) Write "harmonics" above the note, where a section of harmonics starts. This section can be ended by one of the folloing commands: "ord.", "normal", "natural"

    As for the trills, they should be triggered as one note samples. If you are still using the Special Edition sound set instead of the Special Edition PLUS sound set, they can't be triggered because trills are not included in the Special Edition.

    Best,
    Andi

    Vienna Symphonic Library
  • P
    P
    last edited
    last edited

    @andi said:

    For the Special Edition PLUS you will need the Special Edition PLUS sound set. If you haven't done so yet, you can download it at the following location:
    http://vsl.co.at/en/68/375/460/295.htm

    Harmonics can be reached by two ways.
    1.) Add the Harmonic/Open articulation sign to the note (that's the small circle).
    2.) Write "harmonics" above the note, where a section of harmonics starts. This section can be ended by one of the folloing commands: "ord.", "normal", "natural"

    As for the trills, they should be triggered as one note samples. If you are still using the Special Edition sound set instead of the Special Edition PLUS sound set, they can't be triggered because trills are not included in the Special Edition.

    Best,
    Andi

    Oh ok, thanks Andi, that helped! I guess I grabbed the wrong sound set or something at some point.
  • P
    P

    Oops, I take that back. I'm still having problems. My wind choir trills properly now. But, in a separate score for string orchestra, I still cannot get harmonics to play back properly. I did install the SE+ Soundset, and updated the performance Dictionary as told in the help file. I made sure my manual soundset was set up properly, plus I made sure everything in the Sibelius mixer was on the correct channel. But now, not only do the harmonics play the same patch as before, but I can't get anything except the first and second violin sections to play back at all (MIDI channel 1 and 2). The violas, cellos, and basses are not playing a note, even though they work when I hit the "Test" button in the Playback Devices window.

    I haven't got a clue what is going on.
  • andiA
    VSL Team
    andiA

    Can you tell me exactly what settings you made on the Manual Sound Sets page?
    What output do violas, cellos and basses go to when you hit play?
    For the orchestral strings you need the Orchestral Strings Programs (Violins Orchestral, Violas Orchestral, ...). Also don't forget that if you have one section more than once in your score, you will also have to reserve two channels for it in the manual sound sets page.

    Andi 

    Vienna Symphonic Library
  • P
    P
    last edited
    last edited

    @Another User said:

    What output do violas, cellos and basses go to when you hit play?
    They look like they're going to MIDI channels 3,4, and 5 (plus the solo violin on 6), but they don't work in the score. The channels match each other perfectly in Playback Devices, the Sibelius mixer, and in VE.
  • andiA
    VSL Team
    andiA

    That's strange. Do they really go to Vienna Ensemble? Can you check up the channels 3-6 in Vienna Ensemble on arriving MIDI signals during playback? You can see it in the "bull's eye" of the Vienna Instruments.

    Andi

    Vienna Symphonic Library
  • P
    P
    Everything is set up so that it LOOKS like it should be going to VE. Nothing is muted; all the channels are correct. The "bull's eye" lights up on the corresponding channel when I press "test" in the Playback Devices window, but not when I play the score (except for first and second violin sections). I still can't figure this out.
  • andiA
    VSL Team
    andiA

    This sounds a bit mysterious to me. Please do the following things to follow the signals during the playback.
    1.) Open the Sibelius mixer.
    2.) Take a look which output AND which channel the instruments go to (before AND during playback)
    3.) Take another look which channels are set in Vienna Ensemble. They should be the same as on the Manual Sound Sets page.

    If everything is set up right and things keep going wrong, you could try to create the instruments again in Sibelius and then cut and paste the content of the old staves to the new ones. That might help.

    Andi

    Vienna Symphonic Library
  • P
    P
    I got it working again. Everything appeared correct but was still giving me problems. I even tried recreating the instrument and copying and pasting the notes across staves, but that didn't work. I managed to fix it by going into the Playback Devices and reducing all the instruments in the sound set to just one instrument, on one channel, and then rebuilding it from there. Not exactly sure what why it worked, but it's working again! Thanks for your time.
  • P
    P
    Ok, I'm having a separate problem, but it's still on topic; it was mentioned earlier in this thread: Harmonics (Natural, not artificial). They play properly now, except that they will not revert back to normal playing after the symbol disappears.

    I tried writing "ord.", "norm", "normal", "normale", and "natural", but nothing works. I confirmed that "ord." and "norm" are in the Dictionary, and they trigger a sound ID change to "[reset]" (until the next sound ID change). That seems like it should work, but it does not. Plus, I would think they play normal after the harmonic articulation disappears, without the need for any staff text (I understand artificial harmonics are different). Is the Dictionary entry incorrect? What can I do to get the violins to play normal again?

    [Update: Nevermind, I fixed this as well. I recreated the violin instruments in the score and copied and pasted the notes to the new staves. Works fine.]
  • J
    J

    I've about given up trying to get harmonics to work.  Even when I create a new score with one staff and one instrument, create a new playback configuration, create a new VSL configuration, harmonics still won't work.  No matter how I notate harmonics, the legato patch always plays.  So I want to go back to basics:

    in the playback configration, i have:

    Vienna Instruments AU

    Vienna Ensemble AU

    VSL VST

    Vienna Ensemble VST

    I am using Vienna Ensemble AU.  Is that correct?

    In manual sound settings, under sound set, I have

    VE Speical EDITION

    VE SPECIAL EDITION PLUS

    VSL Ensemble Special Edition

    VSL Special Edition

    Which one should I use?

    All string patches are orchestral strings.

    In the user library application support/siebelius software/sounds directory, I have two files:

    VE Special Edtion (Sib 5.2).xml and

    VE Special Edition Plus.xml
  • andiA
    VSL Team
    andiA

    Hello Jay!

    Yes, Vienna Ensemble AU is the one to choose on Mac

    I took a look at your records. You registered the Special Edition Standard and the Special Edition PLUS Strings Standard.
    This means you have the PLUS content for the strings and the SE content for brass, woodwinds and percussion.
    As a consequence you will need the VE Special Edition sound set for the winds and percussion and the VE Special Edition PLUS sound set for the strings. This also means, that you need two activated instances of Vienna Ensemble when combining wind and string instruments in one score.

    Harmonics are working fine on my machine. I guess you combined the wrong sound set with the wrong string matrices. Please use the VE Special Edition sound set with the normal matrices and the VE Special Edition PLUS sound set with the + matrices.

    The sound sets "VSL Ensemble Special Edition" and "VSL Special Edition" are older sound set versions. You don't need them.

    Best,
    Andi

    Vienna Symphonic Library
  • J
    J

    The problem seems to be with the VE plus sound set file.  If I load the VE special edition soundset, articulations change normally (except harmonics, but that's not part of that sound set, so I don't expect that to work.)  If I load the VE Special Edition Plus  soundset, none of the articulation changes work:  pizz, arco, harmonics, legato, etc.  For some reason the violins load a slap pizz articulation and that doesn't change throughout the piece, no matter what articulation changes are in the score.  If I switch back to the VE special edition soundset, pizz, arco, sustain, legato all work normally again.

    I can't find the VSL Ensemble and VSL Special edition sound sets anywhere on my hard drive, but Sibelius still shows them.  I wonder if that could be mucking things up.

    Jay
  • andiA
    VSL Team
    andiA

    On Apple computers the sound sets "VSL Ensemble Special Edition" and "VSL Special Edition" are included in the Sibelius installation and can not be deleted. But they won't do no harm. ;-) Just use the newer ones.

    There is no problem with the sound sets. They have been tested a lot.

    Did you make the program and channel settings on the Manual Sound Sets page for both instances of Vienna Ensemble? Maybe you overlooked the second instance with the Special Edition PLUS sound set.

    Please mind, if you change the sound set, you have to reassign the programs on the Manual Sound Sets page.

    Andi

    Vienna Symphonic Library
  • ErisnoE Erisno moved this topic from Notation Programs & Vienna on
  • ErisnoE Erisno moved this topic from Finale on
  • ErisnoE Erisno moved this topic from Notation Programs & Vienna on
  • ErisnoE Erisno moved this topic from Dorico on
  • ErisnoE Erisno moved this topic from Notation Programs & Vienna on