Vienna Symphonic Library Forum
Forum Statistics

194,062 users have contributed to 42,909 threads and 257,908 posts.

In the past 24 hours, we have 4 new thread(s), 22 new post(s) and 94 new user(s).

  1. Home
  2. Sample Libraries
  3. Synchron Series
  4. install sy strings extremely slow
  • A
    A

    Install of SY strings 1-1 finished after 45 hours!

    Caused Samsung T5.

    The install files were on ext SSD 2TB Samsung T5 on USB-C into IMac Pro 8 core

    Read and write speads tested at 480-540MB/s

    However when installing from the Samsung T5 SSD the speed goes to nearly zero.
  • M
    M

    Had the same problem also on a Mac.
    I was using the Download Manager for install and it was taking hours. 

    Decided to try The SYNCHRON INSTALLER.

    Problem solved about 15 minutes per install.

    EDIT: I negelcted to mention that I also used different SSD's while switching to The Synchrpn Library Installer. After further tests It appears the original SSD refused to cooperate with Synchron.... Not sure why.

    So Crucial Brand SSD's worked fine as always.


    Hope this helps...

    Mike B.
  • D
    D
    Painfully slow here. I’ve been trying to install the library for over a week. Nothing I’ve tried has sped up the process . Very frustrating!
  • PaulP
    VSL Team
    PaulP

    Hi DLC, 

    Unfortunately I don't know WHAT you have tried, but a good SSD drive should solve this problem. 

    Best, 
    Paul

    Paul Kopf Product Manager VSL
  • D
    D

    Hi Paul,

    I've tried 3 SSD drives that all work fine for any other Library. I've even tried to install to the sytem drives of my iMac Pro and my iMac 5k. I'm not using the 5k anymore, so I guess I'll leave it on around the clock until the Synchron strings finally install, then copy the folders to an external SSD and hook that up to the iMac Pro. Hopefully, that will work!

    Hi DLC, 

    Unfortunately I don't know WHAT you have tried, but a good SSD drive should solve this problem. 

    Best, 
    Paul

    [/quote]
  • PaulP
    VSL Team
    PaulP
    last edited
    last edited

    Hi DLC,

    Thanks for the info.

    I'd be interested to see the 4K read/write results you get when you run the Amorphous Disk Mark Application.

    I have attached my results here, for orientation.

    Best,
    Paul

    Paul Kopf Product Manager VSL
  • D
    D

    Hi Paul,

     

    4k read=150.1

    4k write=49.75

    Image
  • PaulP
    VSL Team
    PaulP

    Hi, 

    That's actually OK. 

    Any AV Scanner that might block installation? Anything else that could double-check this installation and slow it down this way?

    Best,
    Paul

    Paul Kopf Product Manager VSL
  • P
    P

    Hi Paul,

    I have exactly the same problem with Synchron-ized Chamber strings. I installed the Synchron Strings 1 previously without any problem.

    I tried to instal many times, different disks, different computers and always the same issue : The install starts well, until 33% and suddenly, the rate transfert falls down to 0 or few Ko/s. Seems to block partly the CPU ...

    I have tried to reinstall the Synchron strings bass, no problem. So, there is definitively a problem with the install package (Synchron-ized Chamber for me).

    Best

    Phil
  • PaulP
    VSL Team
    PaulP

    Hi Phil, 

    Please send the exact combination of components and the tests you have tried on which systems to support@vsl.co.at

    This seems to occur only under very specific circumstances. 

    Usually, the harddrive is the bottleneck. 

    Best, 
    Paul

    Paul Kopf Product Manager VSL
  • G
    G

    Still a problem unless you reformat the T5 using the Apple Disc Utility. After that, it works fine.